Production Lines Dealers in Delhi

• Production Capacity: 35-50 Tons per day
• Storage Container: 1
• Piovan Hopper: 4
• TFE Cutters: 4
• Storage Silos: 5
• Features: Finish Oil System, Bono Hot Oil system

• Usage/Application: Beverages Industry
• Material: Mild Steel
• Type Of Machines: Juice Processing
• Power Source: Electricity / Steam
• Total Installed Capacity: 7500 Pcs (200ml) Per Hour
• Required Minimum Land And Building: 15000 sft
• Required Manpower: 50
• Required Total Electricity Load: 200 kW
• Required Total Water: 75000 Ltrs Per Day
• Required List Of Major Raw Materials: Water, Pulp, Sugar, Food Chemicals
• Required List Of Packing Materials: Tetra Pack Laminate, CBB, Tape
• Time To Start The Unit: 120 Days Till Indian Port , + 15 Days To Destination +15 Days For Erection = 150 Days

• Machine width: 3600 mm-4600 mm
• Stiching Frequency: 1000-1200n min
• Feeding Speed: 0.6-6m / min
• General Power: 128-218kw

We offer nonwoven Carpet Production Line. Technical Specification: Nonwoven Carpet Production Line Machine width 3600 mm-4600 mm Stiching Frequency 1000-1200n min Feeding Speed 0.6-6m min General Power 128-218kw

• Country: Indonesia
• Equipment: YGM130
• Raw Material: Calcium carbonate
• Output Size: 325 mesh, 95% through sieve rate
• Working time: 22

A mining company in Indonesia contacted with us, their company plan to build a calcium carbonate factory. Our company according to their requires and configure a set of production line for them．

Details It is a full set of quartz sand production line equipment produced and designed by EMCC which provides you with the comprehensive technical support.   Advantage 1. Reasonable inlet and outlet designimproves equipment production stability; 2. High manganese steel linerismore wear-resistant and with longer working life; 3. Theclosed cycle of productioncan ensure both fineness and production efficiency; 4. The equipment can independently complete the whole production process from raw material crushing equipment, transport, milling to the finished product collection, storage and packaging. 5. It canalso use special ball mill lining for special industryto get non-ferrous products. Product introduction Production capacity : 20-600T / H Note: this is only an average value and the specific value is subject to the clients’actual equipment configuration in site. Processable Material : For quartz & silica sand crushing or grinding process. Range of Application : Glass foundry ceramics and refractories smelting ferrosilicon metallurgical flux metallurgy construction chemicals plastics rubber abrasive industry and other industries. It is a full set of quartz sand production line equipment produced and designed by EMCC which provides you with the comprehensive technical support. This quartz sand production line is mainly composed of bucket elevator, jaw crusher, frequency screw feeder, MQX superfine ball mill, vortex classifier, cyclone powder collector and pulse dust collector. After ball mill processing, quartz sand powder can be widely used in glass, foundry, ceramics, refractories, smelting ferrosilicon, metallurgical flux, metallurgy, construction, chemicals, plastics, rubber, abrasive and other industries. Working principl After primary crushing by a small jaw crusher crushed materials enter hammer crusher for a second crushing and then being lifted into big hopper by bucket elevator through a frequency conversion screw feeder into the MQX superfine mill for fine grinding. The powder grinded will be transported by bucket elevator to the vortex grader for grading screening. Unqualified powder mill returns to ball mill and qualified powder is brought into the powder collector by updraft cyclone. Most of the qualified powder will be separated from air flow in the collectorand be collected. Trace amount of fine powder follows airflow into the pulse dust catcher. With this required fineness powder is gathered up and meanwhile air is purified by the dust catcher.

Dia of Screw (mm) : 45100, 51105, 65132, 80156 Screw Rotation Speed (rpm) : 1-37, 1-32, 1-34.7, 1-36.9, 1-32.9 Effective Length of Screw (mm) : 985, 1070, 1440, 1800 Power of Main Engine (KW) : 15, 18.5, 37

This rubber roller production line can be used to produce different sizes of rubber rollers. it consists of rubber extruder, rubber roller wrapping machine, etc.

• Max. Size:: 2500x3200mm
• Min. Size: 200x450mm
• Control: Touch Screen
• Air pressure: 6kgf/cm2

Auto I.G. line is fully controlled by PLC system, easy operation Touch screen shows the auto I.G. line working and possible trouble Stainless steel washing machine prevents corrosion and guarantees semi-permanent life Tempered glass door show inside working clearly. Stainless steel brush cover. Automatically detection Low-E glass and coated glass Input conveyor, output conveyor, pre-assembly conveyor, assembly conveyor, press box, tilting table are all made of steel Heating system for the water. No heating system for the blowing air to save energy. Energy saving system for the washing machine Special design for the online and off-line Low-E glass Clear water sprinkling system in washing machine Special designed plate press box. Electrical parts are famous brand, United States , Japan, Germany. The electrical parts are the most important in the whole auto IG line, acceleration is high 6 sensors in assembly conveyor, ensure the assembly precision for IG unit. Three-layer insulating glass is available

The Corrugated Paper Production line is comprised of the following parts: raw paper stand, heating tunnel, single facer corrugating machine, crane, multiphase pre-heater, folder glue machine, dual surface heating and forming machine, line pressing paper dividing machine, traverse cutter, stacking machine and boiler.  The raw paper is fed from the raw paper stand, passing through the heating tunnel, where the paper is heated and the moisture inside the paper is adjusted.  Then the paper is sent into the single facer corrugating device and is corrugated and shape-formed, adhered to another paper forming single facer corrugated paper.  After that, by the crane the paper is sent to pre-heated by the multi-phase pre-heater.  The glue putting machine puts glue onto the paper, and the glued paper is sent to the dual surface heating and forming machine, at this moment the final corrugated paper is formed and outputted continuously.  The formed paper then pass through the cutting and folding machine, where the paper is longitudinally cut and press-folded, and traverse cut, finally formed rectangle corrugated papers can be produced complete.

• Brand Name: LIXIN

We are offering pvc floor mat production line. We special designed this machine for soft pvc car mat making which is 25m long. What more this machine can also used to make any other pvc products such as bar mat, photo frame, soft pvc floor mat keychain, lables and so on.

Compound fertilizer production line is widely applied to produce compound fertilizer, and the capacity between 5000-200000 tons / year. It can granular NPK, NP, AP, DAP, MAP, CAN, SSP and other materials in composite fertilizer particles in a processing line. Advantage Adopts advanced granulator rotating drum granulation ratio is up to 90% high intensity granules The body of the inner cylinder adopts the structure of coating rubber plate high quality raw material prevents sticking on the plate. Wide adaptability of raw materials suitable for compound fertilizer chemicals pharmaceuticals forage High quality stable performance anti-corrosion and wear-resistant material components abras -ion resistant low power consumption long life Easy maintenance service High efficiency and economic profitability and the small amount of feedback material can be granulated again. Capacity adjustable according to customer requirements. Product introduction Production capacity : between 5000-200000 tons / year，It is mainly used for the production of spherical particles with a diameter ranging from 1 mm to 3 mm. Processable Material : It can granular NPK, NP, AP, DAP, MAP, CAN, SSP and other materials in composite fertilizer particles in a processing line. Range of Application : This equipment can be used especially for the manufacture of compound fertilizers with different concentrations and types, such as organic fertilizers, inorganic fertilizers, organic fertilizers and magnetic fertilizer, etc.   Compound fertilizer production line is widely applied to produce compound fertilizer, and the capacity between 5000-200000 tons / year. It can granular NPK, NP, AP, DAP, MAP, CAN, SSP and other materials in composite fertilizer particles in a processing line. This equipment can be used especially for the manufacture of compound fertilizers with different concentrations and types, such as organic fertilizers, inorganic fertilizers, organic fertilizers and magnetic fertilizer, etc. It is mainly used for the production of spherical particles with a diameter ranging from 1 mm to 3 mm. Working principle The complete line includes the following machines: automatic batch processing machine -> mixing machine -> crushing machine ->rotating drum granulator -> rotary drying machine -> refrigerating machine rotationally> rotary screen ->rotary coating machine -> Automatic packing or other accessories. Technical Parameters Compound fertilizer production line is widely applied to produce compound fertilizer, and the capacity between 5000-200000 tons / year. It can granular NPK, NP, AP, DAP, MAP, CAN, SSP and other materials in composite fertilizer particles in a processing line. This equipment can be used especially for the manufacture of compound fertilizers with different concentrations and types, such as organic fertilizers, inorganic fertilizers, organic fertilizers and magnetic fertilizer, etc. It is mainly used for the production of spherical particles with a diameter ranging from 1 mm to 3 mm.

juice water production line, Juice Filling Machine, Water Treatment

We are one of the professional china manufacturers work at armature automatic production line. The following items are the relative products of the armature automatic production line, you can quickly find the armature automatic production line through the list.

Dear Sir, One of our Client from Latin America wants to import the following machinery for PVC pipe production line to quote ASAP. 1. Extruder with double parallel screw a. Full Tank b. Diameter vs. Length proportion 90-120 c. 300kghr. d. 6 meters long e. ½” ~ 2” f. Double line g. No Chinese Motors please h. 440V60Hz i. For PVC pipe production 2. Injection Machine for 200 tons a. For “T”, “elbow”, screws and different accessories for PVC tubes 3. Mill a. 7,5 Horsepower b. With Fan Pease quote FOB in US$ ASAP.

Avail from us well designed Corrugated Cardboard Production Line at reasonable prices. We are capable of manufacturing low grade, middle grade, and top grade corrugated cardboard production line with 3ply, 5ply, and 7ply. We are one of the leading Manufacturers, Suppliers, and Exporters of Corrugated Cardboard Production Line. Consists Of Mill roll standSingle facerPre-heaterConveyer bridgeGluing machineSlitter scorer machineCut off machineStacker Specifications Width : 1400mm-2500mmProduction Speed : 60-250 meters/minute

Corrugated Cardboard Production Line, sheeting machine, Rotary Die Cutter

acp production line, Construction Material, sindobond aluminum composite panel

steel wire production line

PVC Crust Foamed Board Production Line, Plastics and WPC, PP Straps Machinery

102 Series Automatic Production Line