Back Back
ZX-Series Separate LCD display
ZX-Series Separate LCD display with backlight for Tyre pressure & Set pressureStatus display of “Inflation”, “Deflation”, “Complete” through LCDSeparate key for “flat tyre InflationSuitable for Car, SUV & LCV, HCVInbuilt Nitrogen storage tank
...more
ZRS3 Material Handling
More economical than aluminum booms, these heavy duty 700 series jibs utilize rugged steel ZRS3 rail, formed from 9 gauge steel for an easy moving boom up to 20 ft (6 m) long with 220 degree rotation. The boom features a running surface with less then 1% rolling resistance and is powder coated for a smooth, clean, corrosive-free surface. For custom jibs, low profile jibs, or portable pallet base mounts, consult the factory. Air and electric supply packages are sold separately. Stud anchors or bolts are to be supplied by the customer. The units perform best when the item being lifted weighs less than 300 lb (136 kg), but higher capacities are achievable. Ingersoll Rand vacuum handling devices are pneumatically controlled and come standard with a safety interlock so loads can not be dropped during transfer.
...more
VL2 manual chain hoist
12 - 20 metric ton Lifting Capacity Our top of the line manual chain hoist, the VL2 offers an exclusive hand chain guide to provide smooth, even operation and eliminate jamming. Perfect for construction, maintenance, rigging and shipbuilding.
...more
ULM2 S Material Handling system
14 - 25 Ton Lifting Capacity Ingersoll Rand's ULM2 and ULM2S have been designed to offer our lowest headroom possible, maximizing lifting capacities for areas with height restrictions. Key Features Meets ASME B30.16 Specifications All steel construction for external impact resistance Forged steel load hooks Chill-hardened, machine tread trolley wheels with 2 precision bearings per wheel Swivel trolleys available to travel extremely tight radius, (as tight as 21 feet) for track without sacrificing headroom for capacities up to 6 ton 2 roller thrust bearings used in trolley capacities 3 tons and larger for longer life and reliability Corrosion resistant zinc plated hand chain
...more
TS700/TS900/TS1400 Engine Starter
Key Features No oil in drive air is necessary Splash lubrication system internally lubricates the planetary gears and motor bearings Air cooling extends bearing and seal life No internal or external shut-off devices Versatility Multiple spline pinions Low pressure drop design Pre-filter and after-filter as standard Easy to use, advanced microprocessor High performance valves for long extended life
...more
Truckstar and TS Blower
TS range has been developed specifically for dry bulk transfer applications on trucks for the cement, flyash, lime, flour, powder, sugar, plastic pellets, sand and grain industries…
...more
T480 Barring Motor
90 psig air operation produces more than 300 ft-lb of torque. For diesel engines with displacements up to 500 liters and gas engines up to 1000 liters. Integral disc brake is always engaged when motor is not in operation to ensure safer, easier engine adjustments.
Features : Reversible vane air motor for precise control Rugged design provides maximum durability and dependability Pendant control enables safer one-person operation For diesel engines with displacements up to 500 liters and gas engines up to 1000 liters Etc.
...more
Stainless Steel Air Strainers
IR strainers are used in the air line to assure long starter life where air or gas is contaminated. The stainless steel strainers utilize a 40 mesh element making them ideal for the new ST1000 and for our popular line of vane starters.
...more
ST600 Turbine Air Starter
For engine displacement of: Diesel–1000 to 5000 CID (16 to 80 liters) Carburated–2000 to 10,000 CID (32 to 160 liters) Industry applications ideal for the ST600 Series starter - mining and marine.
...more
ST500 Series Turbine Air Starter
For engine displacement of Diesel–300 to 6,000 CID (5 to 100 liters) Carburated–600 to 12,000 CID (10 to 200 liters) Industry applications ideal for the ST500 Series starters - oil and gas, marine, power-gen, and transportation. Key Features Powerful 44 hp turbine motor uses no external lubrication Splined output shaft allows for smooth torque transmission Sealed for air and gas applications Steel insert at inlet ensures a solid connection Smooth pre-engagement piston minimizes ring gear wear Versatility Left- or right-hand rotation available 30-150 (2.1-10.3 bars) psi operation Optional pinions and flanges for any engine
...more
ST400 Series Air Starters
For engine displacement of Diesel–300 to 3600 CID (5 to 60 liters) Carburated–1000 to 7200 CID (16 to 120 liters) Industry applications ideal for the ST400 Series starters - marine and power generation. Key Features Pre-engaged Inline design Efficient 26 hp turbine motor uses no external lubrication Weighs only 23 lbs. One hose connection Infinite mounting positions SAE 1 and SAE 3 mounting flanges available Versatility Compact, lightweight design makes installation easy Overhung pinion design fits most worldwide manufacturers' engines Left- and right hand rotation available 30-150 psi (2.1-10.3 bars) operation
...more
SS800 Series Air Starters
For engine displacement of: Diesel – up to 500 CID (8 liters) Carburated – up to 1000 CID (16 liters) Industry applications ideal for the 3BM and 5BM starters - oil and gas production, shipping, and trucking. Key Features All models sealed for use in air or gas applications Offset design for simple mounting Powerful 80 hp motor Multiple offset gear ratios: B = 2.18:1; C = 2.53:1; D = 3.44:1 Backcap ports for injection lubricating Versatility Inertia (SS810) and pre-engaged (SS815, SS825, and SS850) starters available 4 inlet, 4 exhaust, and 16 drive housing orientations 90-150 psi (6.2-10.3 bars) operation Remanufactured starters available Left- and right-hand rotation available
...more
SS350 Air Starters
For engine displacement of: Diesel – 200 to 1200 CID (3 to 20 liters) Carburated – 400 to 2400 CID (6 to 40 liters) Key Features All models sealed for use in air or gas applications Inertia drive for fast, reliable starts Compact, inline design 9.5 hp motor on 5BMG; 8.4 hp motor on 3BMG Back ports for injection lubricating Versatility 4 inlet, 4 exhaust, and 12 drive housing orientations Fits a wide range of small and medium size engines 90-150 psi (6.2-10.3 bars) operation
...more
solenoid control valves
These DC electrically actuated valves are designed for pilot operation of the IR relay valve and are approved for applications affected by the U.S. Department of Transportation safety codes.
...more
SN-S - Process Blower
SNS Series for neutral gases Biogas, N2 , Ar , CH4 , H2 , He… . Applications Pneumatic conveying of polyethylene Biogas revovery Degasing Furnace cooling Hydrogas recovery process
...more
SN-P - Process Blower
SNP Series for dangerous gases O2 , O3 , H2S , CO2 … Applications Coke blast-furnace gas recovery Gas recycling Compressor for molecular sieves regeneration Transfer of oxygen, produced by Vacuum swing Absorption (VSA)
...more
SN Blower
Ingersoll Rand offers a wide range of positive displacement, three-lobe blowers for use in compression and vacuum applications for air and other neutral gases. Applications Pneumatic conveying Chemical drying and evaporation Aeration (Waste Water Treatment)
...more
SME - Multi-stage Centrifugal
SNP Series for dangerous gases O2 , O3 , H2S , CO2 … Applications Coke blast-furnace gas recovery Gas recycling Compressor for molecular sieves regeneration Transfer of oxygen, produced by Vacuum swing Absorption (VSA)
...more
SIAV vacuum blowers
SIAV & VTB Series are the only dry positive displacement blowers capable of attaining 28" Hg (93% vacuum). Our vacuum blowers SIAVVTB are also available in Atex category 2 version, on request (Atex II 2 GD c IIB T3 160°C) Applications S.I.A.V. series blowers are engineered primarily for vacuum applications. They can alternatively be used for pressure unloading. Standard applications are: Vacuum trucks (industrial, septic, municipal, etc.); Fly ash vacuum pneumatic conveying Evaporation, Centralized plant vacuum Soil remediation
...more
S2H Blower
S2H Range of positive displacement blowers are designed for use in blower and vacuum applications. Suitable for handling air and inert gases, these blowers are dimensionally similar to other popular brands.
...more
RR Series Regulator Relay Values
Ingersoll Rand regulator relay valves combine the features of a pressure regulator and a solenoid controlled relay valve in one compact device. This combined unit can be mounted directly to the starter, simplifying your piping system.
Features : Combines the functionality of a pressure regulator and a relay valve Includes solenoid valve with manual override feature Mounts directly to starte Etc
...more
Road Splash Defectors
Constructed of all corrosion-resistant materials, these road splash deflectors are designed to prevent contamination from entering the exhaust port of the starter. Used in applications where a muffler is not required, they allow maximum exhaust air flow for greater starting power and efficiency.
...more
relay valves
Ingersoll-Rand Relay Valves provide immediate response to assure Air Starter disengagement and prevent damage to the pinion or flywheel ring gear. The aluminum die cast housing resists abrasion and corrosion while the stainless steel piston return spring will not rust from moisture in the air line
...more
Rail System Components
Ingersoll Rand Rail Systems consist of hanger kits, rails, end stops, splice kits, end trucks, and trolleys. These components can be configured to meet a vast array of application needs. This flexibility means you don't have to sacrifice functionality, which is common with pre-packaged workstation cranes.
Feature : Load Ratings : Load ratings are clearly marked on both sides of the bridge crane Safety Cables : Safety cables come standard for all hanger kit and end truck connections providing redundant safety Etc.
...more
air solutions
Reviews & Ratings
Write a ReviewBe first to Rate
Rate This
Share your Correspondence Details to receive messages from R. D. Dutta & Company Private Limited
Post Free Ad