Universal Testing Machine
50,000 - 1,500,000 Per pcs
Machine used in materials science to determine the properties of a material. Machines have been devised to measure tensile strength, strength in compression, shear, and bending (see strength of materials), ductility, hardness, impact strength (see impact test), fracture toughness, creep, and fatigue. Standardization of machines and tests is the province of the International Organization for Standardization. Materials testing, measurement of the characteristics and behavior of such substances as metals, ceramics, or plastics under various conditions. The data thus obtained can be used in specifying the suitability of materials for various applications—e.g., building or aircraft construction, machinery, or packaging. A full- or small-scale model of a proposed machine or structure may be tested. Alternatively, investigators may construct mathematical models that utilize known material characteristics and behavior to predict capabilities of the structure. Type of Testing ü Universal test, ü Tensile Test, ü Elongation Test, ü Strain Test, ü Stress Test and Bending
...moreStability Chamber
100,000 - 150,000 Per pcs
Special Purpose Machine
150,000 - 900,000 Per pieces
Special Purpose Machine (SPM) Special + Purpose + Machine It can be defined when the machine is designed or manufactured to perform a special or defined task in a repeated manner. Resotech is also well known for their high-end performing Special Purpose Machine. Resotech is one of the known leaders of automation technology. Most reliable semi and fully customized automation in manufacturing unit or production unit design by our mechanical and electrical engineering experts prove us one of the best leaders of automation technology in the globe. We as a partner make you feel in ease with our training, service and support
...moreSalt Spray Chamber
150,000 - 700,000 Per piece
The salt spray (or salt fog) test is a standardized and popular corrosion test method, used to check corrosion resistance of materials and surface coatings. Usually, the materials to be tested are metallic (although stone, ceramics, and polymers may also be tested) and finished with a surface coating which is intended to provide a degree of corrosion protection to the underlying metal. Salt spray testing is an accelerated corrosion test that produces a corrosive attack to coated samples in order to evaluate (mostly comparatively) the suitability of the coating for use as a protective finish. The appearance of corrosion products (rust or other oxides) is evaluated after a pre-determined period of time. Test duration depends on the corrosion resistance of the coating; generally, the more corrosion resistant the coating is, the longer the period of testing before the appearance of corrosion/ rust. The salt spray test is one of the most widespread and long established corrosion tests. ASTM B117 was the first internationally recognized salt spray standard. Other important relevant standards are ISO9227, JIS Z 2371 and ASTM G85.
Type : Environmental Test Chambers
Certification : CE Certified, ISO 9001:2008
Application : Industrial Use
Color : Black, White
Voltage : 220V
Condition : New
Driven Type : Electric, Pneumatic
Phase : Single Phase
Warranty : 1year
Automation Grade : Automatic
Country of Origin : India
Brand Name : Resotech
...moreRaw Mango Cutting Machine
85,000 - 150,000 Per piece
Mangos are used for making mango juice, mango pickle and etc., for making mango pickle, have to cut the mangos into Slice pieces. And the mangos are cut by manual cutting system, by hand and knife. Manual cutting system is not safe because it lead to injuries like cutting workers hand and fingers and also difficult to cut the mango because of presence of its hard seed.
...moreLeakage Testing Machine
150,000 - 1,000,000 Per pcs
1 Piece (MOQ)
RESOTECH offering to our clients, leak test machines which have the ability of testing minutest leakages with utmost accuracy with pressure drop & vacuum method. The machine is widely trusted as it gives accurate results and certifies the product to be the leakage free. These leak testing machines are widely finds its applications in various industrial sectors. We provide solutions for leak testing of any casting, molding, assembly components of automobile, pharmaceutical, packaging industries to suit various leak testing applications in production testing, quality control and R & D applications. This is high pressure air leak test through microprocessor based pressure drop method with highest resolution to meet international standards
Color : blue
Color : White
...moreHumidity Chamber
50,000 - 150,000 Per pcs
RESOTECH Make Humidity Chamber or low temperature incubators enable end users to determine levels of organic matter and nitrogen in wastewater samples. This wastewater must be effectively measured for contaminates, treated and then released back into the environment without posing a threat to the water supply system. Recently, stricter enforcement by government regulatory agencies charged with monitoring air and water quality has forced a greater number of organizations to actively test and treat their wastewater. Features:- • Rapid air circulation • Durability • Longer service life • Heavy insulation • Motorized forced air circulation WORKMANSHIP The Humidity Chamber is 100 millimeters thick insulated and properly sealed. The casing, frame, and product range are made completely of stainless steel. The ventilation components are made of Mild- sheet steel.
...morehot and cold chamber
150,000 - 500,000 Per pcs
Hot & Cold Chamber is intended for performing different type of test where the temperature of sample environment must be controlled within certain limits. Our policy of continual liaison with leading researchers ensures we maintain our premier position as suppliers of high quality Hot & Cold Chamber and associated facilities. Our Hot & Cold chamber, were designed with Safety, Reliability, Ease of operating and ergonomically. Features:- • Rapid air circulation • Durability • Longer service life • Heavy insulation • Motorized forced air circulation
...moreHot Air Oven
45,000 - 100,000 Per pcs
Hot air ovens are electrical devices which use dry heat to sterilize. They were originally developed by Pasteur. Generally, they use a thermostat to control the temperature. Their double walled insulation keeps the heat in and conserves energy, the inner layer being a poor conductor and outer layer being metallic.
...moreFood Dehydrators
45,000 - 145,000 Per pcs
Drying (dehydrating) food is one of the oldest and easiest methods of food preservation. Dehydration is the process of removing water or moisture from a food product. Removing moisture from foods makes them smaller and lighter. Dehydrated foods are ideal for backpacking, hiking, and camping because they weigh much less than their non-dried counterparts and do not require refrigeration. Drying food is also a way of preserving seasonal foods for later use. Foods can be spoiled by food microorganisms or through enzymatic reactions within the food. Bacteria, yeast, and molds must have a sufficient amount of moisture around them to grow and cause spoilage. Reducing the moisture content of food prevents the growth of these spoilage-causing microorganisms and slows down enzymatic reactions that take place within food. The combination of these events helps to prevent spoilage in dried food. The preservation of foods by drying is based on the fact that microorganisms and enzymes need water in order to be active. In preserving foods by this method, one seeks to lower the moisture content to a point where the activities of food-spoilage and food-poisoning microorganisms are inhibited. Dried, desiccated, or low-moisture Resotech foods are those that generally do not contain more than 25% moisture and have a water activity (aw) between 0.00 and 0.60. These are the traditional dried foods. Freeze-dried foods are also in this category. Another category of shelf-stable foods are those that contain between 15% and 50% moisture and an aw between 0.60 and 0.85. These are the intermediate-moisture (IM) foods. Dehydrated products readily take up moisture when immersed in a liquid medium, leading to significant changes in their thermo physical properties. The rehydration kinetics, the structural properties (apparent density, true density, specific volume and internal porosity), the viscoelastic behavior (compression tests), and the flavor losses were the important parameters during rehydration of various fruits and vegetables. The effect of temperature on the above properties are also impact on some fruits and vegetables dehydrated by different drying methods (convective, vacuum, freeze, and osmotic drying).
...morefish dehydrator
35,000 - 450,000 Per pcs
The drying of fish is generally required to be carried out at a relatively low temperature to avoid the high temperature affecting the quality of the fish after drying. The moisture of fish is found in fats and oils. Dehydration is difficult, and controlling the rate of dehydration is critical. Rapid drying will destroy the drying quality of the fish, so the drying time needs to be longer. Resotech fish dehydrator is suitable for drying all kinds of freshwater fish and marine fish. It dry fish at low and middle temperatures, which dry the fish better. The dried fish do not change any of its nutritional value. The scent of the fish is preserved and the taste is better. How to dehydrate fish by Resotech food dehydrator Ingredients: fish, size above 100mm Drying target: good taste and strong and hard fish meat
...moreEnvironmental Test Chambers
10,000 - 200,000 Per pcs
RESOTECH an ISO 9001: 2008 Certified Company, are a business organization, actively engaged in the manufacturing, supplying of Laboratory Instruments, Scientific Research and Laboratory Equipment’s. These laboratory equipment’s manufactured with efforts of our dedicated team of techno crafts, which is sincerely engaged in continual improvement of our range through consistent R & D. Further, we keep ourselves updated with the advanced technology and ensure to incorporate them in our lab instruments manufacturing process. Our know-how of modern techniques for various applications and functions involved in the process of manufacturing and quality testing keeps us ahead of our competitors. In pursuit of attaining excellence, the efforts of our company are directed towards incorporating the latest technological advancements and inputs, available at our end. Not only this, we do not leave any stone unturned towards ensuring the high degree of performance of these different scientific and laboratory instruments delivered by us
...moreCompression Testing Machine
150,000 - 500,000 Per Piece
1 piece (MOQ)
Compression Testing Machines have a wide range of applications. A number of materials & metals in different forms & shapes can be tested for a variety of tests like Tension, Compression, Transverse, Bend Re-bend, 180° Bend, Shear, Brinell, Pullout, etc. Special attachments are also available for testing of Flat belts, Chain links, Wire ropes, Nut-bolts.
...morecold chamber
150,000 - 500,000 Per piece
1 Piece (MOQ)
Cold Chamber is intended for performing different type of test where the temperature of sample environment must be controlled within certain limits. Our policy of continual liaison with leading researchers ensures we maintain our premier position as suppliers of high quality Cold Chamber and associated facilities. Our Hot & Cold chamber, were designed with Safety, Reliability, Ease of operating and ergonomically. Features:- • Rapid air circulation • Durability • Longer service life • Heavy insulation • Motorized forced air circulation
...moreBod Incubator
45,000 - 250,000 Per pcs
RESOTECH Make Biochemical Oxygen Demand (BOD) incubators or low temperature incubators enable end users to determine levels of organic matter and nitrogen in wastewater samples. This wastewater must be effectively measured for contaminates, treated and then released back into the environment without posing a threat to the water supply system. Recently, stricter enforcement by government regulatory agencies charged with monitoring air and water quality has forced a greater number of organizations to actively test and treat their wastewater. BOD incubators facilitate the storage of wastewater samples, and can accommodate from 62 – 565 BOD bottles. Features:- • Rapid air circulation • Durability • Longer service life • Heavy insulation • Motorized forced air circulation WORKMANSHIP The BOD INCUBATOR is 100 millimeters thick insulated and properly sealed. The casing, frame, and product range are made completely of stainless steel. The ventilation components are made of Mild- sheet steel.
...moreBe first to Rate
Rate ThisOpening Hours