Rod Mill Dealers in Delhi

To make sure that we offer only defect-free range of products, our quality experts cross check every product at diverse stages. Procurement of the product from us is profitable, as we can provide it in wholesale any time of the year and ensure delivery is done on the postulated time.

Rod grinding sand making machine is widely applied in metal and nonmetal mining water conservancy industry and construction material to grind all kinds of ore and rock. Advantage Transmission Transmission is constituted by reduction box transmission gear electrical machine and electronic control which drive device can match up with energy consumption of grinding process that lower energy consumption. Rod mill medium Rod shape medium makes final products finer. Closed system Ball mill and classifier constitute a negative pressure closed system that could reduce dust. Rod mill lining plate Wave stepped wedge shape are adopted on the lining plate of rod mill. Product introduction Production capacity : 0.62-200T/H Notice: this capacity is mean value capacity and the specific production capacity is subject to clients’ actual equipment configuration. Processable Material : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum grain slag ore slag coal dust bentonite barite marble talc refractory material.Range of Application : metal and nonmetal mining all kinds of rock or ore could grind for construction material industry and water conservancy industry. Rod grinding sand making machine is widely applied in metal and nonmetal mining, water conservancy industry and construction material to grind all kinds of ore and rock. EMCC adopts advanced controllable inlet and outlet technology, grinding media is used according to corresponding grinding material, line contact replacing surface contact makes the discharging granularity uniform and productive, rod grinding machine has dry-type and wet type to choose, clients could select suitable type according to practical situation. Working principle Electrical machine drives barrel to rotate by reduction box and gearwheel gearing-down or low speed synchronous motor downshifts through gearwheel to rotate barrel. Barrel is loaded with steel bar as grinding medium. Under the centrifugal force and friction force grinding medium will be elevated to certain height and be thrown down. Grinded material will be put into barrel continuously from feed port and be grinded by moving medium processed material will be discharged out of machine by the force of overflow and feeding to the next process.

Details Rod grinding sand making machine is widely applied in metal and nonmetal mining water conservancy industry and construction material to grind all kinds of ore and rock. Advantage Transmission Transmission is constituted by reduction box transmission gear electrical machine and electronic control which drive device can match up with energy consumption of grinding process that lower energy consumption. Rod mill medium Rod shape medium makes final products finer. Closed system Ball mill and classifier constitute a negative pressure closed system that could reduce dust. Rod mill lining plate Wave stepped wedge shape are adopted on the lining plate of rod mill. Product introduction Production capacity : 0.62-200T/H Notice: this capacity is mean value capacity and the specific production capacity is subject to clients’ actual equipment configuration. Processable Material : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum grain slag ore slag coal dust bentonite barite marble talc refractory material.Range of Application : metal and nonmetal mining all kinds of rock or ore could grind for construction material industry and water conservancy industry. Rod grinding sand making machine is widely applied in metal and nonmetal mining, water conservancy industry and construction material to grind all kinds of ore and rock. EMCC adopts advanced controllable inlet and outlet technology, grinding media is used according to corresponding grinding material, line contact replacing surface contact makes the discharging granularity uniform and productive, rod grinding machine has dry-type and wet type to choose, clients could select suitable type according to practical situation. Working principle Electrical machine drives barrel to rotate by reduction box and gearwheel gearing-down or low speed synchronous motor downshifts through gearwheel to rotate barrel. Barrel is loaded with steel bar as grinding medium. Under the centrifugal force and friction force grinding medium will be elevated to certain height and be thrown down. Grinded material will be put into barrel continuously from feed port and be grinded by moving medium processed material will be discharged out of machine by the force of overflow and feeding to the next process.

• Display: Date,Time,Revolving Speed,Cut-Off Time,Lapse Time of Each Channel
• Number of Lane: 5
• Revolving Speed: 1 - 20 rpm (1 rpm steps)Mode A Can be preset with the keyboard and displayed on LCD
• Rod Diameter: Rat 90 mm
• Mouse: 30 Mm
• Material of Rota: Polyvinyl Chloride
• Flange to Flange Distance: 83 Mm
• RS232C Output Port: Baud Rate 9600 bps Connector D-sub 9P male
• Dimension: W650 x D420 x H500 Mm
• Weight: Approx. 18 Kg

PPRM provides the complete range of equipment needed for today’s modern wire rod mill operations with specific solutions for carbon steel, quality steel and special steel comprising HEEP Technology.

30 rolling stand mill facilitates large reduction ratios and produces wire rods with diameters from 5.2mm to 22mm. • Digitally controlled reheating furnace ensures optimized heating arrangement which promotes uniform mechanical properties in the wire rods and enables very low scale formation. • Alternate horizontal & vertical rolling stands for controlled rod movement during rolling prevents detrimental surface defects like rolling laps and stickers in the final product. Final product confirms to close dimensional tolerances due to less stress generation during rolling. • Breakdown mill before the continuous rolling stands improves product quality as increased number of passes minimizes segregation, porosity and inclusions

• Capacity: 350,000 tons

Main rolling line equipment supply (including: mechanical, lubrication and hydraulic equipment) and management of design works. Sinosteel Mecc undertaken supply of mechanical equipment and management of design works.Design annual capacity of this project is 350,000 tons.plain rod: f5.5-16mm plain rod coil and f6-16mm rebar coil. The whole rolling line consists of 28 stands mill. Stand 1-14# are 2-highs closed type rolling mill, H-V arrangement , stand15-18# are cantilever mill, H-V arrangement , 19-28# is 10 stand ‘V’ type no-twist heavy duty block mills. Whole rolling line is continuous and no-twist. The guarantee rolling speed is 80msAll equipment of this project were made of China, the finishing block is the first “V” type high speed wire rod mill developed in China. We supplied all equipment and managed of design works. During erection period, we correspond relationship of owner, design institute, manufacture and erection part, solved various problems in time, insured the wire rod mill put into production as soon as possible.

Wire Rod Mill

Rod grinding sand making machine is widely applied in metal and nonmetal mining water conservancy industry and construction material to grind all kinds of ore and rock. Advantage Transmission Transmission is constituted by reduction box transmission gear electrical machine and electronic control which drive device can match up with energy consumption of grinding process that lower energy consumption. Rod mill medium Rod shape medium makes final products finer. Closed system Ball mill and classifier constitute a negative pressure closed system that could reduce dust. Rod mill lining plate Wave stepped wedge shape are adopted on the lining plate of rod mill. Product introduction Production capacity : 0.62-200T/H Notice: this capacity is mean value capacity and the specific production capacity is subject to clients’ actual equipment configuration. Processable Material : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum grain slag ore slag coal dust bentonite barite marble talc refractory material.Range of Application : metal and nonmetal mining all kinds of rock or ore could grind for construction material industry and water conservancy industry. Rod grinding sand making machine is widely applied in metal and nonmetal mining, water conservancy industry and construction material to grind all kinds of ore and rock. EMCC adopts advanced controllable inlet and outlet technology, grinding media is used according to corresponding grinding material, line contact replacing surface contact makes the discharging granularity uniform and productive, rod grinding machine has dry-type and wet type to choose, clients could select suitable type according to practical situation. Working principle Electrical machine drives barrel to rotate by reduction box and gearwheel gearing-down or low speed synchronous motor downshifts through gearwheel to rotate barrel. Barrel is loaded with steel bar as grinding medium. Under the centrifugal force and friction force grinding medium will be elevated to certain height and be thrown down. Grinded material will be put into barrel continuously from feed port and be grinded by moving medium processed material will be discharged out of machine by the force of overflow and feeding to the next 

The wire rod block has a group and not individual drive for all stands, the shaping in the different passes is done with a calculated tension between the stands in the block in other words the shaping is not tension free like in the intermediate mill. The tension between the stands depends first from constant parameters like the shape of the groove, working roll diameter in the groove, roll diameter relations between the stands, calculated cross section reduction but also from variable parameters like bar temperature, spread of material in the groove depending from type of material and temperature of the material. The different types of material can have different deformation resistance and consequently different roll forces. With higher roll forces the groove open according the mill modulus. All that means that geometrical tolerances like diameter and roundness of the finished rod is not better than the tolerances of the intermediate mill train rolled entry section into the block due to the non uniform tension in the bar created by difference spread in the groove caused by different cross sections of the entering bar, due to different bar temperature, material properties regarding spreading and elongation.

Since the raw material i.e. Steel Billets Blooms is manufactured in the Steel Melting Shop at Champa, the company is able to produce high quality Wire Rod & H.B. Wire in an efficient & cost effective manner.

Applicable for secondary & tertiary crushing of medium hard materials such as gypsum, limestone etc. and bituminous coal. Designed for achieving very high reduction ratio. Available in various models with capacity ranging from 80 to 550 T Hr. (Coal).

Rod mill, Mineral Processing Equipment, Copper Products

wire rod mill

wire rod mill

Block Wire Rod Mill, Automatic Cooling Bed, Cold Billet Shear

Wire Rod Block Mill, Heavy Machine Building And Fabrication