RTD Sensors Dealers in Delhi

Context Plus XP95 temperature (heat) detectors have a common profile with ionisation and optical smoke detectorsbut have a low air flow resistance case made of self-extinguishing white polycarbonate. They monitor temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The response to temperature increases of the standard temperature detec tor (part no: 55000-400IMC) enables the detector to be utilised as an EN54 Grade 2 heat detector. To provide a device for use in ambient temperatures of up to 55°C, a high temperature detector (part no: 55000-401IMC) is also available. This has similar characteristics to the standard temperature detector at 25°C but reaches a 55 count (alarm) at 90°C.

• Range: 200 400 / 600 DegreeC
• Accuracy: Wire/4Wire
• Element: PT-100 / 500 / 1000,Class A / B
• Wire Combination: Simplex / Duplex,2 Wire/3
• Sheath Diameter: SS316 / SS316L
• Head extension: 3 / 5 / 6 / 6.35 / 8 mm

• Brand Name: System Sensor
• Operating Voltage Range: 8 to 30VDC (Nominal 12/24VDC)
• Typical Standby Current @ 25ÞC: 60μA @ 24VDC (LED no blink)
• Maximum Alarm Current (LED On): 80mA @ 24VDC (Limited by panel)
• Application Temperature Range: -30°C to +70°C
• Humidity: 5 to 95% Relative Humidity (non condensing)
• Diameter: 102mm
• Model: 5351E

The 5351E thermal detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With its multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’. The 5351E thermal detector incorporates an Application Specific Integrated Circuit (ASIC). Combined with the latest in thermal element technology the detector provides efficient and accurate detection of fires, especially in environments such as bars or kitchens where smoke detectors are inappropriate due to the high level of airborne contamination.   Features• Low profile design• Low current draw• Backward compatible with Series 100 detector range of bases• Wide operating voltage 8 to 30VDC• Bi-colour LED detector status indicator• Programmable sensitivity• Addressable feature• Advanced maintenance features via remote hand-held test unit• Range of detector bases available• Tested and approved to EN54 – 5:2000 Class A1R (Amendment 1)• Extended warranty

System Sensor 200 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with decade address switches, providing exact detector locations for selective maintenance when chamber contamination reaches an unacceptable level. Models 5251B and 5251RB use an innovative thermistor sensing circuit to produce 135°F fixed and rate-of-rise thermal detection in a low profile package. Model 5251H provides fixed high temperature detection at 190ºF. These thermal detectors provide cost effective, intelligent property protection in a variety of applications. Specification Height : 2.0 inches (51mm) Diameter 6.1 Inches installed in B210LP base 4.1 inches (104 mm) installed in B501 base Shipping Weight Heat 4.8 oz. (136 g) Photo/photo with heat 5.2oz. (147 g) ion 5.4 oz. (153 g) Operating Temprature Range Ion Photeo : 32-1200F (0-490C) Photo with Thermal 32-1000F (0-380C) Thermal : -4-1000F (-20-380C) High Temprature : -4-1500F (-20-660C) UL Listed Velocity Range Ion : 0 - 1200 fpm (0 - 6.1 m/sec) Photo with Thermal : 4000 fpm Suitabe For Installation in ducts Insect Screen Hole Size Photo : 0.016 inch (0.41mm) nominal Ion : 0.035 Inch (0.8mm) nominal Relative Humidity : 10-93% noncondensing Thermal Rating Fixed Temprature Setpoint : 1350F (570C) Rate of Rise Detection : 150F/min (8.30C/min.) High Temprature Heat : 1900F (880C) Voltage Range : 15-32 Volts DC Peak Standby Current (Max. Avg.) Ion/Thermal : 150 pA @ 24 VDC (without communication, LED off) 200 pA @ 24 VDC (one communication every 5 sec. with LED enabled) Photo/Photo With Thermal : 250 pA @ 24 VDC (without communication LED off), 300 pa @ 24 VDC (one communication every 5 sec. with LED Enables) LED Current (Max.) : 6.5 mA @ 24 VDC (on)

• Brand Name: Tempcon Components
• Width: 7mm
• Thickness: 2 mm
• Cable Length: 150mm

• Length: 100 Meter
• Conductor Type: Copper
• Temperature: 200 Degree
• Diameter: 4 mm
• Brand Name: Sheena Cables
• Power: 600 V
• Packaging Type: Bundle

• Type: Rtd Probes
• Material: Stainless Steel
• Length: 1-2 Mtr
• Application: Laboratory, Temperature Measurement
• Condition: New
• Packaging Type: Box, Corrugated Box, Plastic Packet
• Ambient Temperature: +60 °C
• Color: White

General Purpose RTD (Series 4) Series 4 General Purpose RTD Fiberglass Insulated Wire General Purpose RTD's are low cost and offered in a variety of configurations. Tip temperatures can be as high as 450°C (842°F) for fiberglass insulated wire, or 200°C (392°F) for FEP insulated wire. Models specified with a head cover can be ordered with no process connection, 1/2" NPT, or 3/4" NPT process connections. For higher temperatures, see Series R Mineral Insulated RTDs. ModelDescription 122087-00FEP insulation extension 100ΩRTD, 6" length, #6 spade terminal. 122087-01FEP insulation extension 100ΩRTD, 12" length, #6 spade terminal. 122087-02FEP insulation extension 100ΩRTD, 18" length, #6 spade terminal. 122095-04General purpose (3-wire) 100ΩRTD with #6 spade terminals. 122095-17Flex hose extension 100ΩRTD, 0° bend, #6 spade terminal. 122095-25Stainless steel overbraid extension 100ΩRTD, 0° bend, #6 spade terminal. Related Products Series 16A Temperature/Process Controller Series 16A Temperature/Process Controller Series 8C 1/8 DIN Temperature Controller Series 8C 1/8 DIN Temperature Controller Series 16C 1/16 DIN Temperature Controller Series 16C 1/16 DIN Temperature Controller Series 4C 1/4 DIN Temperature Controller Series 4C 1/4 DIN Temperature Controller Series TSF Thermocouple Limit Control Series TSF Thermocouple Limit Control Application : Laboratory, Temperature Measurement Packaging Type : Box Condition : New Type : Series 4 General Purpose RTD  Color : Grey Brand:Dwyer : Length: 5 mtr Usage/Application:Industrial : Tip Temperature:450 Degree C (842 Degree F)

A Resistance Temperature Detector (RTD) senses heat, based on the principle, that a change in temperature, results in a corresponding change in the resistance of a wire. A small excitation current is passed along the element, the resultant voltage is measured and converted to units of temperature. RTDs have achieved a well deserved reputation in various Industries for their superior stability and accuracy. The result makes these devices well suited for a wide variety of applications.

• Application: Industrial Automation
• Temperature Range: -40 to 450 deg C
• Probe Length: 0 - 150 mm
• Probe Diameter: 0.5 - 8 mm
• Cable Length: 3 m
• Sensor Connection Wiring: 3 Wire
• Termination Type: Lead Wire
• Material Grade: SS310
• Probe Material: Stainless Steel

• Material: ABS
• Color: White
• Brand Name: Agmatel
• Features: Quick Measurement, High Accuracy, DC Power
• Display Type: Digital
• Automation Grade: Automatic
• Model Name/Number: ATDO1H
• Working Temperature: 49 Degree C
• Response Time: 0.5 Second

We are offering to the clients resistance temperature detector (rtd). Our resistance temperature detector (rtd) is widely acknowledged for its stability, reproducibility and linear positive temperature. It is widely used in power, petrochemical, pharmaceutical industries among others.

Our organization has gained recognition as a flourishing organization for providing RTD Sensor that is used in various industries. Offered RTD Sensor is manufactured using quality assured components and the latest technology under the supervision of our adroit professionals.