S&S INDUSTRIES(INDIA) Mayapuri, Delhi

We supply steel windows and ventilators of standard rolled steel sections conforming IS 74521982, joints mitered and welded with 15x3 mm lugs, 10 cm long 15x10x10 cm or with wooden plugs and screws or raw plugs and screws or with fixing clips or with bolts and nuts as required, including applying a priming coat of approved steel primer, excluding the cost of metal beading other fitting except necessary hinges or pivots as required.

Wooden fire rated doors are not recommended for fire ratings of 60minutes and above as per the international standard. Wooden fire rated doors are not consistent on performance and hence the core used plays a vital role.The minimum door thickness recommended is 60mm, The wooden fire rated requires intumescent seals and fire retardent paints as a protection material.

Since last 48 successful years we have been manufacturing Pressed Steel Doorswindows & are best known for creating new profiles.We Supply Pressed Steel Window Frames as per size, Profile or drawing issued by the siteclient.

Thickness : 1.60 mm

PUSH EXIT BAR It is a Horizontal metal bar fixed to the inside area of a door. It is a push bar mechanism which can be pushed easily in order to open the Door and move out safely especially at the time of an emergency. 

PUSH BAR It is a Horizontal and vertical metal bar fixed to the inside area of a door. It is a press bar mechanism which can be pressed easily in order to open the Door and move out safely especially at the time of an emergency.

PRESSED STEEL WINDOW FRAME Providing pressed steel Window frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.20 mm, pressed

We Manufacture Pressed Steel Door Frames and window As Per IS 4351 .Using C.R.C sheet of 1.25 mm thick including hinges ,jamb ,Lock jamb bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded conforming to or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick, lock strike-plate and shock absorbers as specified and applying a coat of steel primer after pre-treatment of the surface.

PANIC EXIT BAR It is a press bar mechanism which can be pressed easily in order to open the Door and move out safely especially at the time of an emergency or panic situation.

PANIC BAR WITH ALARM It is a Horizontal metal bar having an inbuilt alarm system which works as an indicator whenever any one tries to enter the room. It is a push bar mechanism which can be pushed easily in order to open the Door.

The situations where a certain amount of ventilation combined with safety is required rolling shutter-cum-grill may be provided in which the rolling shutter may have a rolling grill portion either at the top ,bottom or at both places. In addition, the rolling grill portion may also be provided in the middle of the shutter. The total height of the grill portion in all the segments of rolling shutter-cum-grill should not exceed 1.0 m and the height of the grill portion in any individual segment shall not be more than 0.5 mm.

Width : 3.5 m

We are dealing in mild steel door, As well We Manufacture Pressed Steel Door Frames and window As Per IS 4351 .Using C.R.C sheet of 1.25 mm thick including hinges ,jamb ,Lock jamb bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded conforming to or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick, lock strike-plate and shock absorbers as specified and applying a coat of steel primer after pre-treatment of the surface.

METAL DOOR WITH SERVICE WINDOW new Designed Door built up specially keeping in mind the Day–to-Day use of any Domestic household. This Door is incorporated & processed after understanding the utmost needs, utility, safety & security of Old age people, children’s & women’s who are mostly at home & are more prone to any danger. Can be easily fixed by any Mason through Hold Fast or Fastner.

GLAZED FIRE DOOR THE FRAME IS FITTED WITH INTUMESCENT FIRE SEAL STRIP OF SIZE 10X4 MM (MINIMUM) AROUND THE FRAME & FIXING WITH DASH FASTNER OF APPROVED SIZE & MAKE, INCLUDING APPLYING A COAT OF APPROVED BRAND FIRE RESISTANT PRIMER ETC.Available Fire Ratings 60 & 120 minutes. No welding joints and sharp edges interlocking at the stiles.

Size : 10X4 MM (MINIMUM)

GALVANIZED STEEL DOORS and Frames to have all hardware preparations, propunctured at the factory including heavy duty stainless steel ball bearing hinges.

SEHGAL DOORS is among the leading organization involved in manufacturing & supplying of fire hose boxes. That is widely utilized in hydrant system. These hose boxes are ensuring the maximum efficiency of the hydrant systems. The entire range of fire hose boxes are using superior grade of material in accordance with set industrial requirement. Apart from this, we utilize quality assured packaging material to ensure that our range of fire hose box is safely delivered to the clients based across the pan India.

PROVIDING FIRE RESISTANT METAL DOOR FRAME OF SECTION 125 X 60 MM HAVING BUILT IN REBATE MADE OUT OF 1.6 MM GALVANIZED SHEET. THE FRAME IS FITTED WITH INTUMESCENT FIRE SEAL STRIP OF SIZE 10X4 MM (MINIMUM) AROUND THE FRAME & FIXING WITH DASH FASTNER OF APPROVED SIZE & MAKE, INCLUDING APPLYING A COAT OF APPROVED BRAND FIRE RESISTANT PRIMER ETC. PROVIDING GLAZING IN FIRE RESISTANT DOOR SHUTTERS, FIXED PANELS, VENTILATORS & PARTITIONS ETC. WITH G.I BEADING OF APPROPRIATE SIZE, MADE OUT OF 1.25MM G.I SHEET. WITH WIRE FIRE RESISTANT GLASS PANES 6MM THICK OF APPROVED BRAND, HAVING MINIMUM 60 MIN. FIRE RESISTANCE.

Fire Resistant Doors These are of superior quality. Our doors have unique combination of integrity, stability and aesthetic value to withstand specified fire rating. These prevent the fire to surpass and increase the safety level. These are also offered by us as per the clients requirements & specifications.

Fire Rated Door frame The detailed literature offers the information about the doors specifications, installation guidelines, and their advantages. These also contain the details about the precautionary measures that one should follow, and the place where these will be suitable to be installed. These give the user or buyer a complete and clear picture of the Fire Doors, as per their convenience.

FIRE HOSE BOXES That is widely utilized in hydrant system. These hose boxes are ensuring the maximum efficiency of the hydrant systems. The entire range of fire hose boxes are using superior grade of material in accordance with set industrial requirement.

Fire Doors EASY TO INSTALL & FIX AT SITE WITH THE HELP OF HOLDFAST INSTALLED ON DOOR OR THROUGH DASH FASTNER. FINAL FINISHED AVAILABLE WITH ZINC PHOSPHATE STORING PRIMER, POLYURETHANE PAINT OR POWDER COATED AS PER THE CLIENT REQUIREMENT. MAINTENANCE OF METAL FIRE DOOR IS VERY LESS AS COMPARED TO WOODEN FIRE DOOR.

Fire Door with Lamination Metal is considered a green building material compared to wood. These Doors stand up far better when talk about the no affects due to Weather change, yes to resale value, Light on Weight etc compared to Wooden Fire Door. We strongly recommend Metal Fire Door with Lamination against the Wooden Fire Doors. Lamination can be one side or both the side depending upon the client requirement.

External Trim is a locks installed on outer side of a door in order to access the panic bar and make the Door operational from outside. It can be a lock with lever handle or a knob to operate the panic bar mechanism easily. This lock is effective when their is an equal or adequate use of Door from both the openings & the Door is required to be both side functional.

It is a form of lever tumbler lock for unlocking a door during emergency conditions. The mechanism consists of a spring-loaded metal bar fixed horizontally to the inside of an outward-opening door. When the lever is either pushed or D-pressed, it activates a mechanism which unlatches the door allowing occupants to move quickly from that building.

Hooter is a Device designed specially for the Doors which have limited or restricted excess of entries. It is connected with the Door through internal wiring which works simultaneously along with the Door movement. Hooter is connected to the Door in a way that when ever anyone opens the door the Hooter automatically receives a signal & gets activated by buzzing an alarm and indicates the presence of someone around.