Salt Spray Chamber Dealers in Kirti Nagar, Delhi

• Type: Spray Chamber
• Color: Metallic
• Voltage: 220V
• Power: 3-6kw
• Driven Type: Electric
• Phase: Double Phase, Single Phase, Three Phase

The updated model of Water / Rain Spray Chamber specially designed to determine suitability of electronic and electrical components driving under rain conditions.Construction Chamber :  Double Wall and leak proof. Interior Chamber :  Will be made of Heavy Duty Stainless Steel Exterior Chamber : Will be made of Heavy Duty Mild Steel / Stainless Steel Bottom Tank :   Made  of  Heavy Duty Stainless  Steel  Sheet and is mounted on the Trolley below the Main Chamber. Portability  :   Mounting type trolley with casters for easy portability will be provided. Drainage System : The Chamber will be provided with Tapered Drain Holes to drain out water accumulated inside the Chamber. Viewing Window : A viewing window of 30 x 30 cms will be provided on Front Door. Door : A full front opening door, double walled insulated will be provided for ensuring full access to the working space inside the chamber. Gasket : Two gaskets, one on the chamber and the other one for leakproofness at the door, will be fitted. Locking System : The  door  is  also  provided  with  heavy  duty  hinges  &  ratchet type locking system. Chamber The chamber will be provided with a cylinder in the centre with 8 nos. of sockets, which will be connected to the nozzle. The cylinder will be fed through a suitable pump to create the sufficient pressure with by-pass valve and the main valves will control the pressure in the cylinder which in-turn control the pressure at the nozzle tips. All the connections will be provided with compression fitting for leakproofness. The same water will be re-circulated.Precipitation Measurement  : Precipitation measurement will be done by using collector of 100 mm height and inside diameter 140 mm. Water Spray Nozzles  As per IS – 9000 : Water Spraying 8 Nozzles capable of spraying water in solid cone form to get precipitation rate of 2.5 mm / minute will be equipped in the chamber. Eight Water Spray Nozzles will be equipped in the Chamber out of which Four Nozzles at the top Four Corners at an angle of 45° and four Nozzles in the centre of each four sides. Rain & Shower Nozzle As Per JIS D 0203 : Shower through 40 holes and rain through two holes. Rotation of the Rain & Shower Nozzle is 17 rpm. Pressure Gauges  :  Separate pressure gauge will be provided for each spray nozzle along with Pressure Regulator, for indicating the pressure of the nozzles at the nozzles. The pressure gauges will be mounted on the panel  and equivalent  length of copper tubing which run to the nozzle end  and the gauges will be calibrated  accordingly. Port Holes : Port Holes with suitable Rubber Plugs will be provided to access for Internal Chamber Volume and for connecting wires/pneumatic pipes etc.Revolving Table  : Revolving Table with geared motor with Clockwise & Anticlockwise rotation having diameter between 450 mm to 500 mm at the centre of the working space will be provided. Table will be capable of rotating around its vertical axis.  Table RPM  :The RPM of the table will be variable between 2 to 10 rpm with an accuracy of ±0.5 rpm.Hour Meter  : The Chamber will be equipped with Hour Meter for chamber operation time measurement.Control Panel & WiringAt the right hand side of the chamber a control panel will be fixed with all the controls, switches, fuses, contactor assemblies and indicating lamps etc. All the channel type wiring will be as per IS Code for suitable current rated copper wires.Timer : Timer will be provided in the Chamber for Auto Switch Off of the complete chamber after completion of the selectable test time period.Other Specifications Showers/Nozzles :  8 Nos (as per IS – 9000) Pressure Gauges :  8 Nos (as per IS – 9000) Rain & Shower Nozzle :  1 No. (as per JIS D 0203) Pressure Gauges :  1 No. Indicator :  Elapsed Time Indicator Power Supply :  220/415 Volt, AC, 50Hz Other Features Door opening :  From front side. Precipitation Rate :  Precipitation Rate of Water Spray will be 2.5 mm/min. The Chamber will be capable of spraying water at Ambient temperature. Standard : IS-9000 (Part XVI)-1983 & JIS D 0203 Size : 1.0 Cubic MeterSafety Protection Back up fuse protection for Mains, Pump and Geared Motor. Overload protection for Pump and Geared Motor. Audio-Visual Alarm for High Temperature and Test Completion. Safety Limit Switch will also be provided.

The updated models of Salt/Cass Fog Test Chamber specially designed for evaluating the corrosion resistance of the surface treatment of metallic materials by Copper Accelerated Acetic Acid Salt Spray Test Method. It consists of following parts. Test Chamber :It consists of Cabinet and Lid and is constructed with insulated double structure made of FRP Moulded Sheet. The upper part (triangular shaped lid made of FRP with acrylic glass window) has sufficient space for the mist to accumulate naturally on it and is so shaped that drops so accumulated do not fall on specimen being tested. Air-Saturator :It is provided to supply heated and humidified clean air, over 90% RH, for Atomization of the solution. It consists of Body (made of stainless steel), Heater, Bubbling Nozzle, Air Cleaner & Pressure Regulator. Air Regulator :The Air Regulator will maintain a constant pressure of Air at 70 to 170 Kpa.Air Filter :The compressed air will be passed through a Filter Arrangement to remove all traces of oil and solid matters before sent to the saturation tower.Lid Sealing :Lid Sealing through Water Seal Method.Mist Dispersion Atomizer :Atomizer made of Acrylic Glass will be equipped in the Chamber having property of non-choking. It produces a mist of atomized solution, which is distributed uniformly throughout the exposure zone by means of Mist Dispersion Atomizer incorporated with a baffle to prevent dispersion of large liquid droplets. Compressed Air and Gravity Process will help for creation Fog through Atomizer.Heating System :The Temperature within the Chamber maintained by Heater with Blower System, which provided in-between the Exterior and Interior walls.Solution Supply Tank :Solution Supply Tank will be provided to supply solution to Mist Dispersion Tower and will be made of FRP Moulded Sheet.Mist Collector :Two Mist Cylinders are provided for measurement mist quantity. Each has 80 cm² of horizontal area. The condensate is collected in individual graduated cylinders.pH Indicator :pH Indicator is inbuilt in Control Panel.Control Panel :Separate Control Panel will be provided located on the Trolley. The Control Panel will house : RH and Temperature Controllers-cum-Indicator for Main Chamber. PID Temperature Controller-cum-Indicator for Air Saturating Tower. PID Temperature Controller-cum-Indicator for Solution Tank. Weekly Programmable Timer, Hour Meter, ON/OFF Switches, Fuses, Electronic Relays and Indicating.Lamps. pH Indicator. Material :Control Panel, Stand and the Chamber containing other accessories of the Equipment will be made of Stainless Steel 304 grade. Wiring :All wiring will be as IS code. Channel type wiring will be done with suitable current rated copper wires.Power Supply : 220/240 V, 50 Hz, Single Phase, AC Mains.Safety Device : Cut-out at the time of water shortage in air saturator. Cut-out at the time of over current in control devices. Low Water Level Controller with Mechanical Floats type-Refilling Arrangement. Pre Installation Facilities to be required at user’s premises : Power Supply – Single Phase or Three Phases. Drainage System. Compressed Air. Distilled Water Reservoir or R.O. Reservoir as per user’s Test Requirement.

We are offering salt spray chamber. 1. Digital indicators cum controller its function is to indicate and maintain the temperatures. For solution tank itsfunction is to indicate and maintain the temperatures and for test cabinet, its function is to indicate the temperature only. 2. Digital timer (999 hours) with cutt-off facility it shows the working time for the apparatus & the time consume in the process in digitally system. Time limit is for 999 hours. 3. Humidity indicator with sensor humidity can be checked in digitally way. Its function is to maintained during the salt spray with saturation of salt solution. 4. Air regulator (frl unit) the air regulator will maintain a constant pressure of air. 5. Air filter (frl unit) the compressed air will be passed through a filter arrangement to remove all traces of oil and solid matters before sent to the saturation tower. 6. Mist dispersion automizer atomizer made of s.s will be equipped in the chamber having property of nonchoking.it produces a mist of atomized solution, which is distributed uniformly through out the exposure zone by means of mist dispersion atomizer incorporated with a baffle to prevent dispersion of large liquid droplets.

TEST CHAMBER DIMENSIONS: AS PER REQUIREMENT The chamber is made of noncorrosive material. 100° lid to avoid falling of condensation on the item under test. There will be a water channel on the top of the chamber in which the top lid will rest there avoiding leakage of salt fumes, if any. The chamber will be floor mounting type with casters for portability. Spray nozzle : Spray nozzle, GLASS Instrumentation : Solid-state digital temperature indicator controller with PT 100 as temp. Sensor will be provided for Indication and control of dry and wet bulb temp. SSR output controlled will be PID Controllers.

Salt Spray Chamber, Accelerated Curing Tank, curing tanks

salt spray corrosion cabinet, Laboratory Ovens, Digital Gloss Meter