Salt Spray Chamber Dealers in Delhi

Touch Tone Salt Spray Fog Tester is used to test the corrosive resistance of products  whose the surface was treated with paint, electroplating, inorganic and organic film, anode handling, anti-rust oil.

• Type: Spray Chamber
• Color: Metallic
• Voltage: 220V
• Power: 3-6kw
• Driven Type: Electric
• Phase: Double Phase, Single Phase, Three Phase

The updated model of Water / Rain Spray Chamber specially designed to determine suitability of electronic and electrical components driving under rain conditions.Construction Chamber :  Double Wall and leak proof. Interior Chamber :  Will be made of Heavy Duty Stainless Steel Exterior Chamber : Will be made of Heavy Duty Mild Steel / Stainless Steel Bottom Tank :   Made  of  Heavy Duty Stainless  Steel  Sheet and is mounted on the Trolley below the Main Chamber. Portability  :   Mounting type trolley with casters for easy portability will be provided. Drainage System : The Chamber will be provided with Tapered Drain Holes to drain out water accumulated inside the Chamber. Viewing Window : A viewing window of 30 x 30 cms will be provided on Front Door. Door : A full front opening door, double walled insulated will be provided for ensuring full access to the working space inside the chamber. Gasket : Two gaskets, one on the chamber and the other one for leakproofness at the door, will be fitted. Locking System : The  door  is  also  provided  with  heavy  duty  hinges  &  ratchet type locking system. Chamber The chamber will be provided with a cylinder in the centre with 8 nos. of sockets, which will be connected to the nozzle. The cylinder will be fed through a suitable pump to create the sufficient pressure with by-pass valve and the main valves will control the pressure in the cylinder which in-turn control the pressure at the nozzle tips. All the connections will be provided with compression fitting for leakproofness. The same water will be re-circulated.Precipitation Measurement  : Precipitation measurement will be done by using collector of 100 mm height and inside diameter 140 mm. Water Spray Nozzles  As per IS – 9000 : Water Spraying 8 Nozzles capable of spraying water in solid cone form to get precipitation rate of 2.5 mm / minute will be equipped in the chamber. Eight Water Spray Nozzles will be equipped in the Chamber out of which Four Nozzles at the top Four Corners at an angle of 45° and four Nozzles in the centre of each four sides. Rain & Shower Nozzle As Per JIS D 0203 : Shower through 40 holes and rain through two holes. Rotation of the Rain & Shower Nozzle is 17 rpm. Pressure Gauges  :  Separate pressure gauge will be provided for each spray nozzle along with Pressure Regulator, for indicating the pressure of the nozzles at the nozzles. The pressure gauges will be mounted on the panel  and equivalent  length of copper tubing which run to the nozzle end  and the gauges will be calibrated  accordingly. Port Holes : Port Holes with suitable Rubber Plugs will be provided to access for Internal Chamber Volume and for connecting wires/pneumatic pipes etc.Revolving Table  : Revolving Table with geared motor with Clockwise & Anticlockwise rotation having diameter between 450 mm to 500 mm at the centre of the working space will be provided. Table will be capable of rotating around its vertical axis.  Table RPM  :The RPM of the table will be variable between 2 to 10 rpm with an accuracy of ±0.5 rpm.Hour Meter  : The Chamber will be equipped with Hour Meter for chamber operation time measurement.Control Panel & WiringAt the right hand side of the chamber a control panel will be fixed with all the controls, switches, fuses, contactor assemblies and indicating lamps etc. All the channel type wiring will be as per IS Code for suitable current rated copper wires.Timer : Timer will be provided in the Chamber for Auto Switch Off of the complete chamber after completion of the selectable test time period.Other Specifications Showers/Nozzles :  8 Nos (as per IS – 9000) Pressure Gauges :  8 Nos (as per IS – 9000) Rain & Shower Nozzle :  1 No. (as per JIS D 0203) Pressure Gauges :  1 No. Indicator :  Elapsed Time Indicator Power Supply :  220/415 Volt, AC, 50Hz Other Features Door opening :  From front side. Precipitation Rate :  Precipitation Rate of Water Spray will be 2.5 mm/min. The Chamber will be capable of spraying water at Ambient temperature. Standard : IS-9000 (Part XVI)-1983 & JIS D 0203 Size : 1.0 Cubic MeterSafety Protection Back up fuse protection for Mains, Pump and Geared Motor. Overload protection for Pump and Geared Motor. Audio-Visual Alarm for High Temperature and Test Completion. Safety Limit Switch will also be provided.

• Type: Corrosion Test Chamber
• Certification: CE Certified, ISO 9001:2008
• Application: Industrial Use
• Color: Grey
• Voltage: 220V, 380V
• Condition: New
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric
• Phase: Single Phase, Three Phase
• Warranty: 1year
• Country of Origin: CHINA
• Automation Grade: Automatic, Fully Automatic
• Brand Name: ASLI
• Material: PVC
• Standard: ASTM, ISO, IEC,
• Certificate: Ce, Iso , Sgs, Tuv, Bv

• FEATURES & ADVANTAGES: Easy loading and unloading of large samples, Digital microprocessor based control, Auto water refill system, Auto Fog Collection System, Over temperature alarm .
• Temperature range: 35°C±1°C / 50°C ±1°C
• Temperature of pressure barrel: 47°C±1°C / 63°C ±1°C
• Temperature uniformity: ±2°C
• Temperature fluctuation: ±0.5°C
• Temperature sensor: PT100
• Humidity range: ≥93% (No Controlled / Display)
• Controller type: 02 No. PID temperature controllers for chamber and pressure vessel
• Timer: Digital timer 9999 hours
• Canopy: Made of Acrylic Manual lifting
• Chamber construction: PVC reinforced hard plastic sheets for complete corrosion proof construction
• Brine tank (reservoir): 25 liters inbuilt brine tank,  Low water level indicator .
• Salt fog fallout rate: 1
• Spray mode: Continuous or intermittent spray
• Compressed Air pressure: 1.00 ±0.01kgf/cm²
• Sample rackes: 08 Nos. V type racks,12 Nos. support rods .
• Fog accessories: 01. No. Spray tower 02 Nos. cup collectors
• Standard fittings: Mains ON/OFF, Pressure regulator, Dial type pressure gauge,  Drain system, Spray solenoid valve .
• Safety features: Over temperature protection, Low water protection
• Power supply: 220 Volts 50 Hz

• Application: laboratory
• Material Grade: Stainless Steel 316
• Air pressure: 0.2 to 0.8Kg/cm2
• Temperature range: 35 degree to 60 degree

• Type: Environmental Test Chambers
• Certification: CE Certified, ISO 9001:2008
• Application: Industrial Use
• Color: Black, White
• Voltage: 220V
• Condition: New
• Driven Type: Electric, Pneumatic
• Phase: Single Phase
• Warranty: 1year
• Automation Grade: Automatic
• Country of Origin: India
• Brand Name: Resotech

• Brand Name: Sunshine
• Voltage: 250 V
• Country of Origin: Made in India
• Temperature Range: 50-70 Degree C
• Usage/Application: Industrial
• Material: FRP
• Power Source: Electric

The updated models of Salt/Cass Fog Test Chamber specially designed for evaluating the corrosion resistance of the surface treatment of metallic materials by Copper Accelerated Acetic Acid Salt Spray Test Method. It consists of following parts. Test Chamber :It consists of Cabinet and Lid and is constructed with insulated double structure made of FRP Moulded Sheet. The upper part (triangular shaped lid made of FRP with acrylic glass window) has sufficient space for the mist to accumulate naturally on it and is so shaped that drops so accumulated do not fall on specimen being tested. Air-Saturator :It is provided to supply heated and humidified clean air, over 90% RH, for Atomization of the solution. It consists of Body (made of stainless steel), Heater, Bubbling Nozzle, Air Cleaner & Pressure Regulator. Air Regulator :The Air Regulator will maintain a constant pressure of Air at 70 to 170 Kpa.Air Filter :The compressed air will be passed through a Filter Arrangement to remove all traces of oil and solid matters before sent to the saturation tower.Lid Sealing :Lid Sealing through Water Seal Method.Mist Dispersion Atomizer :Atomizer made of Acrylic Glass will be equipped in the Chamber having property of non-choking. It produces a mist of atomized solution, which is distributed uniformly throughout the exposure zone by means of Mist Dispersion Atomizer incorporated with a baffle to prevent dispersion of large liquid droplets. Compressed Air and Gravity Process will help for creation Fog through Atomizer.Heating System :The Temperature within the Chamber maintained by Heater with Blower System, which provided in-between the Exterior and Interior walls.Solution Supply Tank :Solution Supply Tank will be provided to supply solution to Mist Dispersion Tower and will be made of FRP Moulded Sheet.Mist Collector :Two Mist Cylinders are provided for measurement mist quantity. Each has 80 cm² of horizontal area. The condensate is collected in individual graduated cylinders.pH Indicator :pH Indicator is inbuilt in Control Panel.Control Panel :Separate Control Panel will be provided located on the Trolley. The Control Panel will house : RH and Temperature Controllers-cum-Indicator for Main Chamber. PID Temperature Controller-cum-Indicator for Air Saturating Tower. PID Temperature Controller-cum-Indicator for Solution Tank. Weekly Programmable Timer, Hour Meter, ON/OFF Switches, Fuses, Electronic Relays and Indicating.Lamps. pH Indicator. Material :Control Panel, Stand and the Chamber containing other accessories of the Equipment will be made of Stainless Steel 304 grade. Wiring :All wiring will be as IS code. Channel type wiring will be done with suitable current rated copper wires.Power Supply : 220/240 V, 50 Hz, Single Phase, AC Mains.Safety Device : Cut-out at the time of water shortage in air saturator. Cut-out at the time of over current in control devices. Low Water Level Controller with Mechanical Floats type-Refilling Arrangement. Pre Installation Facilities to be required at user’s premises : Power Supply – Single Phase or Three Phases. Drainage System. Compressed Air. Distilled Water Reservoir or R.O. Reservoir as per user’s Test Requirement.

• Color: White
• Voltage: 110V
• Application: Industrial Use
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 1year

Salt Spray Chamber is used to check the corrosion resistance ability of rust proofed components against atmosphere conditions. Designed strictly as per the industrial quality standards, our Salt Spray Chamber is high in demand amidst the clients. We are reckoned as the prime Salt Spray Chamber Manufacturer, Exporter, and Supplier in India.   Construction It is double walled Inside & outside walls are made up of Stainless Steel 316 Insulated with glass wool

• Timer: 6 Digits Hours
• Color: Grey
• Condition: New
• Automation Grade: Automatic
• Application: Industrial Use
• Country of Origin: India
• Controls: Digital (microprocessor Based Control system)
• Capacities: 250 litres, 450 litres.
• Inner Chamber Construction: (FRP) fibre Reinforced Plastic
• Chamber Temperature Range: Ambient to 45⁰C.
• Test Chamber temperature Range: 35⁰C ± 2⁰ C.
• Hamber Temperature Least Count: 0.1⁰ C
• Chamber Temperature Repeatability: ±2⁰ C
• Air Saturator Temperature Range: Upto 45⁰ C
• Air Saturator Temperature Least Count: 0.1⁰C
• Air Saturator Temperature Repeatability: ± 2⁰C
• Ph Value of Salt Solution: 6.5 to 7.2 ph
• Temperature Control: Inbuilt Pid Temperature Controller
• Test Air Pressure: 0.7 kg/cm to 1.2 kg/cm
• Air Regulator: 0 to 5 kg / cm
• Fog Collection: 1-2 Ml per 80cm per Hour as per Standards
• Measuring Cylinder (external): Available (capacity: 50ml)
• Inbuilt Reservoir Tank for Solution: Capacity – 20 Ltrs
• Related Standard: ASTM B117 & ISO 9227

For Salt Fog testing and Corrosion Testing in Salty atmosphere Temperature Range: Ambient to +55° C Humidity Range: Ambient to Saturation Limit Control of Temperature: Digital Readout of set and actual values Testing Chamber: Acrylic Glass, Nozzle made of Acrylic plastic Heating element: SS Element: 0.75 kW, 230 V, single phase AC, fitted in the salt solution tank Solution Tank : Made of Fiber Glass, Double walled, capacity 35 liters approx, with provision for water levels Chamber Stand : Made of MS. Unit is supplied with SS rods and hooks for hanging samples Designed to deliver compressed air at a pressure upto 1 kg/cm². The following sizes are available Salt Mist Chamber size 45 x 45 x 45 cm Salt Mist Chamber size 45 x 45 x 60 cm Salt Mist Chamber size 40 x 50 x 75 cm Salt Mist Chamber size 40 x 50 x 90 cm Salt Mist Chamber size 45 x 60 x 60 cm Salt Mist Chamber size 45 x 60 x 90 cm Salt Mist Chamber size 60 x 60 x 60 cm Salt Mist Chamber size 60 x 60 x 90 cm Salt Mist Chamber size 60 x 60 x100 cm Salt Mist Chamber size 90 x 60 x 90 cm

We are offering salt spray chamber. 1. Digital indicators cum controller its function is to indicate and maintain the temperatures. For solution tank itsfunction is to indicate and maintain the temperatures and for test cabinet, its function is to indicate the temperature only. 2. Digital timer (999 hours) with cutt-off facility it shows the working time for the apparatus & the time consume in the process in digitally system. Time limit is for 999 hours. 3. Humidity indicator with sensor humidity can be checked in digitally way. Its function is to maintained during the salt spray with saturation of salt solution. 4. Air regulator (frl unit) the air regulator will maintain a constant pressure of air. 5. Air filter (frl unit) the compressed air will be passed through a filter arrangement to remove all traces of oil and solid matters before sent to the saturation tower. 6. Mist dispersion automizer atomizer made of s.s will be equipped in the chamber having property of nonchoking.it produces a mist of atomized solution, which is distributed uniformly through out the exposure zone by means of mist dispersion atomizer incorporated with a baffle to prevent dispersion of large liquid droplets.

• Brine tank capacity: 15 Liters
• Temperature Fluctuations: ≤ ± 0.5°C
• Temperature Precision: ± 1°C

Whether you are new to corrosion atmosphere testing or have been conducting testing for years, we present Salt spray chambers or Salt Fog Chambers that are not only easy to use and maintain but also provide the accuracy and flexibility necessary to meet today's demanding corrosion test procedures including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. These machines create three types of manually adjusted environment; salt spray, high humidity and air drying at any given temperature within the chamber. Any combination of these environments can be programmed, in any order, to form a corrosion cycle. Such a corrosion cycle can be automatically repeated a predetermined number of times. Our models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS), Seawater Acidified Test (SWAAT) or Cupric Acid (CASS). Models above 480 Liters of capacity are ideal for Cyclic Corrosion Cabinet (Cyclic Corrosion Chamber). In Laboratories corrosion tests are used extensively for selection of materials and their surface protection. Our Corrosion box chambers are what you need to predict corrosion resistance of materials such as paints and coatings and are designed and developed to meet the widest possible range of industry standards: • Salt fog testing as specified in DIN 50021 • Condensed water test as specified in DIN 50017 and EN ISO 6988 • Standard climates as specified by DIN 50015

Salt Spray Test Chamber is used to test the anti-corrosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing. SLE Salt Spray Test Chambers are designed to comply with National & International standards as well as further corporate standards of the automotive and coating industry such as ASTM B 117,ASTM B 287,ASTM 368,ASTM D 1735,BS 3900F4,DIN 50021,ISO,9227,ISO 1456,ISO 3768,ISO 3769,ISO 3770,ISO 7253,JIS Z 2371,MIL STD 202 D,MIL STD 810 C,ASTM D2247, ISO 6270-2,ISO 3231,ISO 11503.

• Brand Name: Ramp Impex Private Limited
• Material: Stainless Steel
• Voltage: 220V,AC
• Country of Origin: Made in India
• Item Code: RT-F50A
• Usage/Application: Industrial

TEST CHAMBER DIMENSIONS: AS PER REQUIREMENT The chamber is made of noncorrosive material. 100° lid to avoid falling of condensation on the item under test. There will be a water channel on the top of the chamber in which the top lid will rest there avoiding leakage of salt fumes, if any. The chamber will be floor mounting type with casters for portability. Spray nozzle : Spray nozzle, GLASS Instrumentation : Solid-state digital temperature indicator controller with PT 100 as temp. Sensor will be provided for Indication and control of dry and wet bulb temp. SSR output controlled will be PID Controllers.

We are instrumental in bringing forth an outstanding array of Salt Spray Chamber for our valuable clients. Designed to perfection, these chambers are manufactured using high-grade raw-material obtained from the most reliable and trusted vendors in business. Specially used for the testing of corrosion resistance of the metals, the offered Salt Spray Chamber is available in various technical specifications as per the application requirement of our respected clients. Features: Easy to use design Long term functionality Quality-assured

Backed by a team of expert professional associates, who are having years of experience in the domain, we are rendering salt spray chamber or corrosion test apparatus. The offered product-line finds it used in different industrial applications and are widely acclaimed for its reliability and durability. Apart from this, the offered range is offered at the most market-leading price. features: digital indicators cum controller/indicator digital timer (999 hours) humidity meter with sensor mist dispersion automizer drainage system heating system hanging provision/rack provision air regulator air filter fog collection unit

The Salt water spraying/corrosive resistant machine are specialized to test the performance of the products for its surfaces of various materials after treatment of corrosive protection by means of painting, coating, galvanizing, anodizing and of lubricant.   WEIBER Salt Spray Test Chambers allows selective and reproducible accelerated corrosion testing complying with the requirements of relevant national and international standards such asDIN, ISO, ASTM, DEF, MIL-STD, etc. Standard as well as customizable sizes are available. This Chamber also called Corrosion resistance test chamber, Cyclic Corrosion Test Chamber and Salt Spray Chamber.

• Type: Automatic
• Display: digital
• Material: Acrylic, SS 316
• Power Supply: Electronic
• Size: 12 x 12 x 20 inch, 18 x 18 x 24 inch, 24 x 24 x 36 inch
• Usage/Application: Laboratory

• Type: Salt Spray Chamber

  Innovative Salt Spray Test Chamber has been designed strictly as per the relevant standard to assess the ability of rust proofed components to withstand corrosion due to atmosphere conditions. It is Double Walled. (Stainless Steel 316 inside and Outside also Stainless Steel) with glass wool insulation.    

Innovative Salt Spray Test Chamber has been designed strictly as per the relevant standard to assess the ability of rust proofed components to withstand corrosion due to atmosphere conditions. It is Double Walled. (Stainless Steel 316 inside and Outside also Stainless Steel) with glasswool insulation.

High accuracy, easy adjustments and long functional life are some of the attributes of our Salt Spray Test Chambers. We are distinguished Manufacturer and Supplier of Salt Spray Test Chambers from New Delhi.

This Salt Spray Chamber machine is well suitable for all kinds of metal material surface treatment, including coating, electroplating, organic and inorganic coating, anodizing, rust proof oil and preservative treatment test of its corrosion resistance, so as to establish the quality of the products. FEATURES Durable hard PVC construction, anti-corrosion, easy to clean. Reservoirs with mixing system on stand. Cabinet heated by water jacket, heating element from USA famous company. Separate heating system, be apart from salt testing chamber to ensure accurate result and protect circuit. Exposure zone lined with corrosion-resistant PVC sheets. Clear cover allows viewing of test conditions. Peaked cover prevents dripping of condensation onto samples. Water seal and water level protection system. Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog. Automatic DI water fill to humidifying tower. Digital temperature control and readouts. Integral over-protection on all heaters. Low water cut-off protection on humidifying tower.

• Available Capacity:: -110 L , 270 L , 480 ,680 ,800 ,1000
• • Saturated air pressure (kg/cm2):: 0.8...2.0 ± 0.01
• • Salt spray deposition rate (ml/80 cm2•h):: 1.0...2.0

Salt Spray Test Chamber is used to test the anti-corrosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing ,. feature Adjustable baffle on central fog tower. • The temperature controller uses the numeral to demonstrate, PID control, error ± 0.1°C.

• Type: Salt Spray Chamber
• Color: Black, Brown, Creamy, Grey, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Application: Industrial Use
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Phase: Double Phase, Single Phase, Three Phase
• Warranty: 1year, 2years
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

High accuracy, easy adjustments and long functional life are some of the attributes of our Salt Spray Test Chambers. We are distinguished Manufacturer and Supplier of Salt Spray Test Chambers from New Delhi. The Salt Spray Test Chamber is made from one piece molded (GRP) glass reinforced plastic of high strength and excellent corrosion resistance at elevated temperatures. Our Test Chamber is intended to carry out accelerated corrosion tests conforming to world standards such as ASTM B 117.Advantages Sealed cabinet using simple self-generating water trap. Easy adjustment and monitoring of test conditions. Total atomization of salt solution, low rate of use: 0.5 litres per hour. Easy access to test panels or specimens. Automatic water level control in humidifier system. Accuracy + -2 deg. C on temperature and even fall-out throughout test chamber. Pumped and filtered salt solution fed to jet and large panel capacity. Test cabinet manufactured from non-corrodible materials. Details Internal dimensions are approx. 845 x 655 x 865 mm, holding volume approx. 450 litres and 128 nos. standard panels of typical size 150 x 100 mm The roof unit is made of transparent polymer material for ease in examination of samples under test.

Salt Spray Test Chamber, Leak Testing Machine, Tractor Tyre Mounting Machine