Scientific Components Shahdara, Delhi

Vertical movement is obtained by activating a spring-loaded cam by micrometer head. Rolling contact guide ways using crossed rollers are employed for friction and stick-slip free translation. These guide ways are factory preloaded to eliminate play and wobble. There are tapped holes on top and clearance slots on base for mounting .The stage is constructed from aluminum alloy and finished by black anodizing.

Travel Range : 12mm, 25mm, 50mm.

Material : Aluminium alloy construction and Black anodized finish.

These V- groove type translation stages have precision V- grooved guide ways with rolling contact bearings having crossed rollers. The load capacities of these stages are high. They are vacuum compatible too. Mounting holes: M6 tapped holes are provided on top on 25 mm grid for mounting components. M6 C'bores are provided on base for mounting to other stages, breadboards or base plates.

Square filter holders can hold filters up to 3 mm thickness. The filters are held in position by leaf springs. Square filter holder can hold a single filter at a time and can be stacked for multiple filter assembly. When two or more filter holders are ordered at a time, bolts and nuts suitable for stacking up to 4 filter mounts are supplied along with holders.

Feature : Suitable for rectangular/Square Filters.,Quick removal of filters.,Optics held by leaf springs.

Spectroscopic ellipsometer is widely used for thin film and measurements. It uses a high speed CCD array detection to collect the entire spectrum. It measures films from nanometer thickness up to tens of microns and the optical properties from transparent to absorbing materials. It accurately measures optical constants like refractive index, film thickness and extinction coefficient.

This basic device for qualitative and quantitative analysis is an essential laboratory analytical instrument widely applied in experiments of clinical trials, metallurgical industry, geological environmental protection, chemical machinery manufacturing production, etc., also for instruction and research. A. CT-5,6 Series are advanced single beam design consisting of 5 models. Different one with different bandwidth and wavelength accuracy. All of them provide excellent performance for measurement in the range of 190nm to 1100nm.

Feature : Quantitative,Wavelength Scanning,Multi-Wavelength

Self-centering lens mounts are suitable for experiments where frequent replacements of lenses are needed. The lens is held using three spring loaded calipers. The calipers are released by two levers projecting from the mount. The lens is held in position by spring pressure and can be locked in position by a knob. The device is post mountable with M6 tapped hole at the base.

This support system has four vertical members made from 100 mm x 100mm steel tube and eight horizontal members made from 50 mm x 50 mm steel tubes. These members can be joined by nuts & bolts at the lab site. The honeycomb surface rests on four heavy-duty bolts on the top of the support system, which can also be adjusted for leveling. The adjustment range is ± 5 mm. The support system is given moon light finish by epoxy paint

These rails offer excellent linearity and smooth carrier translation. Rails have linear scale reading in millimeters. M6slots are provided for fixing it on optical breadboard and the carriers are compatible with our rails having dovetail design. They are available in standard width of 95mm and of various length ranging from 25 mm to 150 mm. The carriers can be locked anywhere on the rail. Both M6 and M4 tapped holes are provided on it for mounting components.

Material: : Aluminium alloy.

Precision rotary adjustments are possible with this mount. Platesheet polarizer are held between two threaded rings inside a threaded bore. For other shapes, adapters have to be used.

Material: : Aluminum alloy.

Thickness : 9mm Thickness

Material : Aluminum Alloy.

Finishing : Black Anodized Mat Finish

A perfect plane board for optical experiments is utilized with a honeycomb sandwich panel structure, which has the excellent rigidity and relatively light weight considering the mass. An array of mount holes on the magnetic attachable stainless top easily provides a researcher to secure optical components onto it. The conventional pneumatic isolators have lower vibration isolation efficiency in horizontal direction than vertical in general. But Scientific Components new isolators provide an excellent isolation in all directions by the special designed horizontal vibration removal mechanism and the isolator's natural frequency is very low.

Features : High quality steel honeycomb table tops,Any directional vibration isolation

Plano-convex lens is the most common item used for light focusing and collimation. Coated with antireflective coatings, lenses are used in imaging, lasers and fiber optics. Catalog items list consist of most common diameter and focal length uncoated lenses made from NBK7; UVFS; CaF2 and ZnSe. Any catalog lens can be coated with dielectric or metallic coating.

The Active and the Passive isolation systems are both based on compressed air, providing vibration isolation in frequencies above 2Hz and 10Hz (respectively) making them ideal systems for demanding photonic experiments or for work in a noisy environment. In addition, Scientific Components also offers rigid support systems with no vibration isolation for less demanding applications which require only breadboard isolation. The table below compares the isolation performance of our different isolation systems.

Precision lapping screw and crossed roller guide ensure the accuracy of the motorized linear stage. This stage is miniature motorized linear stage. This motorized linear stage is usually assembled to motorized XY stage or XYZ stage. It is connected with our motion controller via DB9 interface and it can be controlled by our computer software via RS232 interface on controller. Components can be mounted on to the stage either vertically or horizontal.

Features : Ultrathin design. , Crossed roller guide, high accuracy, and good linearity.

Material : Aluminium Alloy.

Finishing : Black Anodized.

The Mirror Holder can be used to mount 25 mm mirrors with thicknesses from 2.5 mm to 6 mm. The clear aperture of the mirror holder is 24 mm.

Meniscus lenses have two curved surfaces one of which is protrusive while other is intrusive, also these lenses are referred to as convex-concave lenses. Radii of curvature of both surface can be chosen independently from each other. Meniscus lenses find application in optical systems, where aberrations need to be minimized, for instance in multi lens focusing objective, where it helps to minimize focal spot of the beam. The same benefit is applied in collimators. Another advantage is that meniscus design allows to make longer focal length lenses than the ones available in Plano-convex design. Lenses with equal radii of curvature on opposite sides serve well as substrates for resonator mirrors.

The linear translation stage is made for adjustment tasks in smallest areas. With an edge measuring only 35 mm, it provides a complete travel range of 5 mm. The LTS is supplied with fine-pitch lead screw or a graduated micrometer .It can bear equally large loads in both directions thanks to forced return travel of the slide. Adapter plates, angle brackets and base plates allow additional assembling possibilities. Therefore, a multitude of applications are possible.

Range : 360° azimuth, 20° elevation, 12’’ vertically.

Resolution : 2 arc sec.

Finishing : Black Anodized.

Item Code : LBS-124

Material : Aluminium alloy.