Sensors Dealers in Janakpuri, Delhi

Ground-borne vibration can be generated by a number of sources, including road and railways, construction activities such as piling, blasting and tunneling. The parameter normally used to assess the ground vibration is the peak particle velocity (ppv) expressed in millimeters per second mm/s).  

VPInstruments’ dew point sensors are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible. The calibrated transmitters can be instantly incorporated into VPVision or they can be connected to your air or gas management and control system. Maintaining the dew point of your air or gas system will prolong the life of your equipment. Permanent monitoring enables you to detect and prevent problems in time.  We offer various models which meet both moderate dry air (refrigerant dryer) and extreme dry air (dessicant dryer) applications. Features and benefits 3-wire loop powered connection Dew point or ppm moisture content IP66 (NEMA 4X) Excellent sensor protection Fast response time

• Type: Photoelectric Sensor
• Application: Security And Protection
• Frequency: 50HZ, 60Hz

DS-22 and DS-T 22 sensors for water level and temperature measurements. High accuracy (< 0,1%). outputs: 0-1V, 0/4-20 mA od ENCODER LEVELSENSE The SEBA LevelSense is a system for aquisition of water level deviations in ground- and surface water. Because of its easy handling and the convincing cost/performance ratio it is outstandingly useful for economic modernization of existing measuring sites.   WATER QUALITY MULTIPARAMETER SENSOR MPS-D8 13 parameters can be measured: water level, °C, conductivity, salinity, O2, pH, ORP, NH3, NO3-, Cl-, NH4+, Na+, Ca2+, F-, K+ and turbidity. For use with data logger MDS-5. MULTIPARAMETER SENSOR MPS-K16 Up to 17 parameters can be measured: Water level, °C, Conductivity, Salinity, O2, pH, ORP, NH3, NO3-, Cl-, NH4+, Na+, Ca2+, F-, K+, Turbidity, Chl a, Cyano Bacteria and Rhodamine WT. For use with data logger MDS-5.   DATA LOGGER UNILOGLIGHT R The UnilogLight R of the new UnilogLight family is the successor of the RDS-2 - a low cost and compact rain logger for rain gauge measurement systems with tipping bucket rain gauges of type RG 50, RG 100 or weighing rain gauge system TRW. It is fully maintenance free with LC-display and real time clock. NEWUNILOGLIGHT The new UnilogLight is the ultimate, flexible data logger within the SEBA Universal Logger family. It is an economic, all-purpose data logging system for various appications in the field of hydrology and meteorology. It was especially developed for digital and analogue SEBA sensors (e.g. LevelSense, RG50/RG100m, DS22) DIPPER-PT Data logger for water level and temperature monitoring with vented cable for direct air pressure compensation. In combination with SEBA SlimCom you can upgrade this unit with an easy data transfer solution. PS-LIGHT 2 BUBBLER The intelligent bubbler device measures water level fluctuations in rivers, channels and reservoirs. As sensor with galvanically separated outputs (4-20 mA, Gray, BCD code) or with integrated data logger and GSM/GPRS modem. Measuring range: 0-10, 20, 30, 50, 70 m (with 1 cm accuracy). DIPPER-APT The SEBA-data logger Dipper-APT provides automatic groundwater measurements of water level and temperature. It is suitable for wells as slim as 1''. Its installation is cost effective and in combination of just one Baro-Dipper the measurements can be barometrically compensated with the aid of DEMASdb software. - We are happy to provide solutions to your specific requirements.   WATER LEVEL RECORDERS TRADITIONAL WATER LEVEL RECORDER ALPHA For continuous ground water level recording on charts. STRIP CHART RECORDER TYPE DELTA Robust and reliable float operated chart recorder for water level recording in rivers. PNEUMATIC GAUGE TYPE DELTA-PS   High accurate bubbler system with strip chart recorder and output signal. Range: 0-2,5 m; 0-7 m; 0-10 m. Accuracy: +/- 0,05 %. Non linearity and temperature influence are microprocessor compensated.   HORIZONTAL CHART RECORDER TYPE XI For continous recording of water level fluctuations in rivers and lakes.

This module integrates DHT11 sensor and other required components on a small PCB. The DHT11 sensor includes a resistive-type humidity measurement component, an NTC temperature measurement component and a high-performance 8-bit microcontroller inside, and provides calibrated digital signal output. It has high reliability and excellent long-term stability, thanks to the exclusive digital signal acquisition technique and temperature & humidity sensing technology.   Power Supply : 3 to 5.5V DC Output signal : Digital Measuring Range : Humidity 20-90% RH; Temperature 0-50 Celsius   Long-term Stability : +/- 0.5% RH/yearSensing period : Average: 2s

• Type: Photoelectric Sensor
• Color: Black
• Application: Laboratory

• Application: Energy Saving
• Time Delay: 10 sec to 30 min
• Weight: 70g
• Height (recommended): 3 m
• Installation Height: 2.5 5 m
• Temperature (Operating): 0C TO 40C
• Load: 6 Amps
• Brand: HONEYWELL MK
• Detection Angle: 360 Degree
• Detection Distance: 6 meter
• Power Source: 220-240 V AC

• Voltage: 12 V
• Application: For Generator
• Operation Mode: Digital
• Error Rate: 10%
• Probe Length: 500 mm

• Brand: VP
• Features and benefits: 3-wire loop powered connection. Dew point or ppm moisture content. IP66 (NEMA 4X). Excellent sensor protection. Fast response time.
• Application: Moderate dry air (refrigerant dryer)

• Material: Plastic
• Application: Automobile Use
• Color: Black
• Power: 15w
• Warranty: 1year
• Alarm Range: 1.5mtr

Angle Sensors are used for measuring different positions of any object. These sensors easily calculate the orientation of an object in regards to a stated reference position. Angle Sensors, offered by us, are available in different types so as to suit the specific requirements of the clients. These Angle Sensors are widely applied in valve position sensing, torque sensing, steering wheel position sensing, contactless rotary position sensing, etc.

In our well-structured warehouse, we store the entire lot in a secured manner under the strict supervision of our expert warehouse personnel. Moreover, our facility is installed with all required amenities needed for safe storage. The assistance of our quality auditors helps us in acquiring quality-approved raw materials from the certified vendors. Thus, we ensure that our products are of unmatched quality.

Context Plus XP95 temperature (heat) detectors have a common profile with ionisation and optical smoke detectorsbut have a low air flow resistance case made of self-extinguishing white polycarbonate. They monitor temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The response to temperature increases of the standard temperature detec tor (part no: 55000-400IMC) enables the detector to be utilised as an EN54 Grade 2 heat detector. To provide a device for use in ambient temperatures of up to 55°C, a high temperature detector (part no: 55000-401IMC) is also available. This has similar characteristics to the standard temperature detector at 25°C but reaches a 55 count (alarm) at 90°C.

The CI-3100 Series of Remote Sensor Particle Counters continually counts particles from a fixed position. Designed for continuous monitoring, the CI-3100 RS offers users a choice of standard data interface options including RS-485 Modbus and 4-20 mA outputs. This CI-3100 RS model requires both a vacuum source, and DC power source. Alternatively, our CI-3100 OPT version contains an internal power supply and vacuum pump eliminating the need for an external air source and vacuum tubing making installation a snap!

• Feature: International Protection Rating IP68 , Polyurethane twisted pair Integral cable 50m

The hermetic sealed industrial piezoelectric accelerometer PAS-101 is designed to monitor the vibration in harsh industrial environment. It uses the industry standard ®ICP 2-wire voltage transmission technic with a 4 mA minimum constant current supply. Signal ground is isolated from the mounting surface and outer case to prevent ground loops. Faraday shielding will limit sensitivity to ESD to a minimum. Annular shear mode design prevents from thermal transient and from spurious signal from high transverse vibrations. Low noise electronic and temperature compensated design will ensure accurate results over the complete temperature range. The sensor provides a voltage output proportional to the vibration acceleration across the two transmission wires. The DC standing voltage is used for OK detection and the dynamic voltage for vibration monitoring.

electronic sensor, Solar Panel, Solar Battery

• Material: PP
• Set Points: 1
• Output: SPST, C NO or NC
• Process Connection: Thread, 3/8”

By making use of quality packaging material, we pack the entire lot in a safe manner ensuring zero damage at buyer's end. The packing procedure is conducted under the guidance of experts. Our team professionals ensure that the products we offer are sternly manufactured using the certified array of raw materials. We conduct strict quality checks while sourcing the raw material.

The Point pH Sensor-100 RP measures the pH of aqueous solutions in pipelines, tanks or ponds. It is suitable for all applications where a low cost disposable sensor is needed. The combination conical bulb pH electrode features a double junction reference configuration which is resistant to process solutions containing ammonia, chlorine, cyanides, sulphides, or other poisoning ions. The conical designs achieves self cleaning by itself.

We wish to introduce ourselves as the company into the field of process control instruments mainly related to pressure, temperature, flow and level. Our product range includes the entire chain from sensors to automation solutions for pressure, temperature, flow, level and humidity. The products are catered to various industries including power plants, oil and gas, pharmaceuticals, chemicals, hvac, cements and fertilizer plants etc.

UL approved photo electric sensing head used as sensor Very low leakage chamber used for smoke collection Telescoping tubes used for smoke sampling Easy installation on duct Direct connection to the fire and smoke damper controller

wireless motion sensors, hidden spy camera, motion detector sensors

Platinum Temperature Sensor, Pir Motion Sensor

• Material: MS
• Country of Origin: Made in India
• Brand: IPS Automation
• Usage/Application: Industrial
• Display Type: Digital
•  :  

• Voltage: 30 V
• Model Number: WE100-P4430
• Brand Name: Sick
• Sensing Distance: 2- 4 m
• IP Rating: IP44
• Output Current: 0.1 A

We offer temperature sensors. Temperature sensors, fitted in engine cooling systems, are meant to sense the temperature & send the signal to the display unit at the dashboard panel in the form of variable current. The display of temperature is based on resistance vs temperature relationship.

rf sensors, Mini Ark Tag, General Steel Pin, Flat Steel Pin

Sensors, Drives, rockwell automation system, servo drive system

Lego Sound Sensor