Serological Water Bath Dealers in Delhi

• Material: Steel
• Shape: Rectangular, Square
• Certification: ISO 9001-2008 Certified
• Application: Bath
• Voltage: 110V, 220V, 380V
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric
• Warranty: 5years
• Country of Origin: India

Temperature Range is from ambient to 100 degree C with an accuracy of ±1 degree C. Double walled, Inner made of Stainless Steel, outer made of heavy duty Mild Steel duly powder coated. Properly insulated. Heating elements are tubular type, made of Copper duly Nickle plated. Covered with perforated S.s.tray. Temperature is controlled with Microprocessor PID controller. Temperature control knob is graduated in degree centigrades. Provided with On/Off switch, indicator, cord plug, etc. Suitable to work on 220 V single phase 50 Hz AC.   Available Size (Dia & Depth) 300 mm x 250 mm x 175 mmfor 2 racks 300 mm x 300 mm x 175 mmfor 4 racks 455 mm x 300 mm x 175 mmfor 6 racks 455 mm x 455 mm x 175 mmfor 8 racks   Optional Accessories STIRRER with 1.20 HP Motor and speed regulator Digital Temperature indicator cum controller..

Serological Water Bath Thermostatic Controlled: without rack and thermometer     Double walled, inside made of stain less steel 304 grade and out side mild sheet painted with attractive stove enamel. Temperature is controlled by a hydraulic thermostat from 5°C above ambient to 100°C with a sensitivity of ± 0.5°C fitted with ISI mark Tublar Element. Bath consists of 2 pilot lamps & on/off switch, to work on 220/230 Volts A.C. Fitted with Thermostat / Thermostat with Stirrer / with PID controller Dual Display with Stirrer.      

• Electrical Supply: 220/230V AC, 50/60Hz

It is a double walled water bath constructed of the outer chamber of mild steel powder coated finish. It features mineral wool insulation to provide the protective coat and prevent any heat loss from the water bath. Temperature accuracy is ±0.5 degree C.

We hold expertise in manufacturing and supplying and exporting a superior quality range of water baths. M.K. Scientific Instruments water baths are heated chambers used for many industrial areas applications environmental applications, academic facilities, clinical laboratories, food technology, government research laboratories and waste water facilities etc. by M.K. Scientific Instruments are known as exceptional Water baths specially designed for testing applications. Double walled Inner Body: Inner chamber made of Stainless steel. Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. Insulation between inner & outer wall with mineral wool/ glass wool thick to avoid any heat loss. Comes with glass mercury thermometer based temperature display provision Temperature Range: Temperature ranges from few degrees above ambient temperature to 97°C ±2°C. Temperature Controller: The Temperature is totally microprocessor based P.I.D., /Thermostat or Digital Temperature Controller cum Indicator controlled for accurate temperature rating. It is Suitable for holding 2, 4, 6, 8 racks Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug. Safety Feature: Thermostat based safety device. Perforated cover of stainless steel based diffuser shelf finish Shelves: Stainless steel perforated/wire road shelves adjustable and sliding. Heater : Tubular U type air heater

• Material: Stainless Steel
• Shape: Rectangular
• Application: Laboratory
• Color: Grey
• Voltage: 220V
• Power: 1-3kw
• Driven Type: Electric

Standard Features : Fitted with digital temperature controller Excellent temperature accuracy & uniformity High grade stainless steel interior Powder coated exterior cabinet Durable walled rugged construction High density glass wool insulation Variety of optional accessories available

• Material: Mild Steel
• Shape: Rectangular
• Application: Bath
• Voltage: 110V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

Our Serological Water Bath is double-walled and filled with high-grade glass wool insulation between the two chambers. We are known as a major Serological Water Bath Manufacturer, Exporter, and Supplier in India. Our Serological Water Bath is offered with excellent features that make increase its efficiency. The Serological Water Bath can be availed from us at the market leading prices.   Description Outer chamber of Serological water bath is made of Mild Steel with powder coating Inner chamber is made of Stainless Steel Thermostatic temperature controller Temperature range varies 5oC above ambient to 60oC

• W     X     H     X        D                       : 300   ×   250   ×   175 mm        
• for 2 racks    : 325   ×   300   ×   175 mm        
• for 4 racks    : 450   ×   300   ×   175 mm        
• for 6 racks    : 600   ×   300   ×   175 mm        

Jindal Serological Water baths are versatile enough to handle any clinical procedure, incubation, inactivation, agglutination, as well as most serological, pharmaceutical, biomedical procedures Construction Our Serological Water Baths are sturdy with double walled construction. The complete inner chamber is made of highly polished stainless steel & the outer body is made of mild steel duly powder coated. The inner chamber is insulated from the outer atmosphere with special grade glass wool insulation. The Water Bath is provided with a drain plug to facilitate easy emptying and cleaning of the inner chamber whenever necessary. Pyramidal shaped cover and perforated removable diffuser are standard accessories.    Heating Elements Immersion heating elements made of high grade materials are fitted at bottom with different ratings for different sizes.    Temperature Control Temperature is generally controlled by capillary type THERMOSTAT from ambient to 95°C ± 1°C. Temperature control knob is graduated in centigrade degrees.    Control Panel The equipment is provided with a panel having a thermostat control knob, ON/OFF switch, two pilot lamps, cord and plug.    Power Requirement The water bath is designed to operate on 220V Single Phase AC Supply (Model with 110V supply is also available).    Size of inner chamber      Optional Accessories Microprocessor based PID temperature controller cum indicator Stirrer with 1/20 HP motor with Stainless steel rod & blade provided with speed regulator or water circulation by a pump

The temperature range of the water bath is from few degree C. above room temperature to 100 deg. C with an accuracy of 0.5 deg. C . This bath is suitable for the Washerman, Kolmer and Khan Test inactivation's, Paraffin Embedding and many other applications in the laboratories. The bath is constructed double walled inside, made of Stainless Steel and outside of Mild Steel Sheet duly painted with epoxy powder coated provided with 25 mm mineral wool insulation on five sides . The Temperature is controlled by Electronic Digital Temperature Controller-cum-Indicator a from few ºC above ambient to 100 deg. C sensitivity of plus minus 0.5 Heating element are made of copper Nickel plated tabular type and approximately extend the full length of the bath. Control panel is provided at lower portion of the bath consisting of two neon pilot lights which indicates control cycles as well as the mains heater switch, temperature control knob. The bath is complete with perforated and removable diffuser shelves. Stainless Steel cover, brass drain plug, cord with plug to work on 220/230 volts A.C. but without rack and thermometer. Stirrer with 1/20 H.P. High Speed motor with stainless steel stirring rod and blade provided with speed regulator. Lid of water bath is made of Stainless steel 304 quality.   Option:Microprocessed PID controller having 4 ramp & 4 soak profile having set mode, alarm parameter, configuration parameter, profile parameter, set point profile, Pv error indicator , parameter for locking etc. Alarm:It is possible to provide electronic alarm, if temperature deviates more than ± 5 °C to cost extra.. Timer:Automatic timer electronic 999 mts to extra cost.

• Type: Serological Water Bath
• Material: Carbon Steel
• Shape: Rectangular
• Certification: ISO 9001-2008 Certified
• Application: Bath
• Color: Silver
• Voltage: 220V
• Power: 1-3kw, 3-6kw
• Driven Type: Electric
• Warranty: 1year

• Country of Origin: India
• Type: Serological Water Bath
• Material: Stainless Steel
• Shape: Rectangular
• Certification: ISO 9001:2015
• Application: Bath
• Color: Silver
• Voltage: 220V
• Condition: New
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Brand Name: NSLI INDIA

• Temperature: +-0.5°C
• Electrical supply: 230V, 60Hz

Pathological lab universities as the design to meet the regress demand of heating and reciprocating shaking of aquies substances in the laboratories where temperature is used for hating while evaporating where constant temperature is used over long period of time digital PID controller with alarms help the Scientist perform better while chemical reaction takes place.Top Dome shape cover avoid evaporation of water & make condensed water to fall back in the Bath.

  Double walled inside made of stainless steel outer made of M.S. duly painted with backed enamel paint. Range 5ºC above ambient to 90°C & controlled by thermostat. Complete with mains indicator & perforated tray. Cover is provided at the top. .   Inside chamber size 300 x 250 x 175 mm (2 Racks) 325 x 300 x 175 mm (4 Racks) 450 x 300 x 175 mm (6 Racks) 600 x 300 x 175 mm (8 Racks) Optional AccessoriesDigital Indicator cum controller can be fitted Stirrer can be fitted

Serological Water Bath (PLT-109) APPLICATIONS OF SEROLOGICAL WATER BATH Double Walled Serological water bath is a versatile equipment to handle any clinical procedure, Incubation, Inactivation, Agglutination & Biomedical procedures. Double Walled Serological Water Bath is low cost options for Biotechnology, Clinical, Environmental, Medical, Petroleum, Pharmaceutical or Industrial Applications. SALIENT FEATURES & CONSTRUCTION OF SEROLOGICAL WATER BATH Double walled construction. Inner Tank and lid made of Stainless Steel (SS-304 grade). Outer chamber is made of Mild Steel duly powder coated. Flat Stainless Steel Lid prevents Evaporation. Heating by immersion heaters. Temperature range up to 900C. Controls temperature within an accuracy of ±1°C. Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & stainless steel tank. Fitted with drain plug for easy cleaning. To work on 220/230V AC supply.

CONSTRUCTIONVITCO water bath are double walled inside made of heavy gauage brass/coppers heavenly tinned from inside and outer body of mild steel The gap of 1” between two wall is filled with glass wool as insulation to protect loss heat. The cover of the bath has a pyramid type of lid made of Aluminium.HEATERS The bath has U shaped immersion type heater, which is extended to the full length of the bath in order to maintain equal and uniform temperature. TEMPERATURE CONTROL The temperature is controlled by a sensitive thermostat to work from 5°C Above room temperature to 80°Cwith an accuracy of +-0.5 °C.FINISH The equipment is Finished in a durable blued eyed enamel paint with a coloured panel and lid

Waiometra Serological water baths are used for clinical procedure, Incubation, Inactivation, Agglutination, as well as most serological pharmaceutical, biomedical procedure, Washer man, Kolmer and Khan Test inactivation's, Paraffin Embedding and many other applications in the laboratories. We specialize in both standard and customized models, specifically designed to meet the challenging demands of various test areas.   Waiometra High Precision Water Bath is suitable for Biotechnology, Clinical, Environmental, Medical, Petroleum, Pharmaceutical or Industrial Applications. Serological pharmaceutical, biomedical procedure. Research laboratories  

Features: Made of heavy gauge stainless steel with concentric rings. Fitted with heating element for uniform heating throughout. To work on 220 / 230 volts A.C. supply. 

Serological Water Bath is a Double walled system that is manufactured using M.S. sheet duly painted stainless steel. Its inner chamber is made from stainless steel 304 grade sheet. The Serological Water Bath that we offer consists of 2 pilot lamps and on-off switch. It is provided with immersion heater for heating. The temperature of our Serological Water Bath is controlled by thermostat. It comes with the accuracy of ± 2ºC. Available working size : 300X255X175 mm 300X300X200 mm 300X300X300 mm450X300X200 mm Optional : Low Water level cutoff deviceStirrer Digital temperature controller with an accuracy of ± 1oCMicroprocessor based P.I.D. Controller with an accuracy of ± 0.5oC

Double walled, inside made of stainless steel 304 grade and outside mild sheet painted with attractive stove enamel. Temperature is controlled by a hydraulic thermostat from 5ºC above ambient to 100ºC with a sensitivity of ± 0.5ºC fitted with ISI mark Tublar Element. Bath consists of 2 pilot lamps & on/off switch, to work on 220/230 Volts A.C.  

Double walled. Inside made of S.S. Sheet outside of M.S. painted. Thermostatically controlled from ambient to 95°C. Bath consist of S.S. lid, two pilot lamps & On/Off switch. To work on 230V AC (Without racks).