STP & ETP Equipments Dealers in Gulabi Bagh, Delhi

The instrument works on Faraday's law of electromagnetic induction. The magnetic field is generated around the measuring tube by the instrument. The fluid passing through the measuring tube generates a voltage. This voltage is directly proportional to velocity of the flow. Thus the flow is measured and displayed on the indicator. Mag-Flow 650 provides worry free flow measurement, which measures the flow of any conductive liquid flowing through it. It uses non-intrusive measurement element hence, debrissolids will not interfere with the measurement. Its rugged rubber lining provides outstanding electrical insulating properties. Mag-Flow 650 is well designed for industrial waste water and water industry.

The apparatus consists of an evaporating flask rotated by heavy duty motor in a heating water bath (optional). Vacuum distillation of solvent at high and low temperature is achieved quickly and efficiently by use of a variable speed motor, which prevents foaming and bumping of the liquid (solvent) into the evaporating flask and also distillation under controlled atmosphere. The evaporating flasks is pear shaped to give a large surface area of evaporation and is clamped to a glass duct which goes through the drive unit and protrudes about 120 m.m. into the condenser. The condenser is fitted with standard joint at the bottom for receiver flask. The unit is fitted with a quick action jack.CAPACITY       1 ltr.       3 ltr. 

• Voltage: 100-240 VAC
• MODEL: #RE-100 (DR)
• Capacity: 1 ltr.
• Frequency: 50/60 Hz
• Power: 1400 W
• Motor Principle: DC brushless Motor
• Speed Range: 20-280 rpm
• Speed Display: LCD
• Reversible Direction of Rotation: Yes
• Heating Temperature Range: RT-180oC
• Heat Control Accuracy: ±1oC
• Heat Output: 1300 W
• Temperature Display: LCD
• Lift: Motor
• Stroke: 150 mm
• Timer: Yes
• Timer Display: LCD
• Time Setting Range: 1-999 min
• Overall Dimensions (D × W × H): 420 × 400 × 580 mm
• Permissible Ambient Temperature: 5oC - 40oC
• RS 232 Interface: Yes

A mechanical stirring device in which a suitably mounted induction motor will have a vertical shaft having speed of 6000 to 8000 revolutions per minute when loaded. The shaft will be equipped with a replaceable stirring paddle of either of the types and made of metal. The surface will be of such length that the stirring paddle will operate not less than 20 mm and not more than 35 mm above the bottom of the dispersion cup. The dispersion cup will be supported on a rest and shall have a removable baffle. A special dispersion cup conforming to either of the designs shown in IS 2720 (Part IV) 1985 will be provided to hold the sample while it is dispersed. The stirrer will be free from vibration whilst operation and the base will be made of M.S. of at least size 20 cm X 25 cm with rubber cushions. The container and baffle will be of such material as not be affected by the reagents like sodium Carbonate, Sodium silicate , Sodium Hexametaphosphate etc. The stirrings device will be suitable for operation on 230-250 Volts A C with controller switch for different revolution. It will be provided with 3 core wiring of with off-on switch on side. The dimensions of stirring paddles for stirring apparatus and dispersion cup will be as per IS 2720(Part IV) 1985.

Consist of an evaporating Flask rotated by a non-sparking induction Motor in a heating water Bath. Vacuum Distillation of solvent at high and low Temperature is achieved quickly and efficiently by use of speed controller provided. It prevents foaming an vacuum and bumping of the liquid. Other application include vacuum drying of powders and slides. Low Temper ature Vacuum distillation of heat sensitive compounds. The introduction tube permits continuous feed of the liquids into evaporating flask and also distillation under Controlled atmosphere.

The appratus consists of an evaporating flask rotated by sparking induction motor in a heating water bath. Vacuum distillation of solvent at high and low temperature is achieved quickly and efficiently by use of a VARIABLE SPEED motor, which prevents foaming and bumping of the liquid (solvent) into the evaporating flask and also distillation under controlled atmosphere The evaporating flask is pear shaped to give a large surface area of evaporation and is clamped to a glass duct which goes through the drive unit and protudes about 120 m.m. into the condenser. The condenser is fitted with standard joint at the top and the bottom for receiver flask. The unit is fitted with a quick action jack.Capacity 1 litre (Without water bath & Vacuum Pump)

We are engaged in manufacturing, supplying and exporting Rotary Vacuum Evaporator. The Rotary Vacuum Evaporator offered by us comes with large easy to read large digital LCD screen displays heating temperature, rotation speed and timing speed range from 20 to 280 rpm. We offer Rotary Vacuum Evaporator with timer function for precise control processing. Construction And Features : Large 5 L water-oil heating bath with heating temperature range of Rt to 180oCHeating bath with precise temperature control and adjustable safety circuitDesigned a detachable operating panel allows remote controlPatented condenser (cooling surface 1, 500 cm2) with excellent cooling effectMotorized lift with quick-action, automatic release evaporating flask to top position in case of power failureAdjustable final position recognition to protect operator and sample against breakageEvaporating flask with an ejector, convenient to removeAvailable with timer function to precise control processingChemical-resistant double PTFE system and patented pressure spring provide excellent sealingPC can control and document all parameters via Rs 232 interface (USB)

This is for mechanical analysis and also other laboratory applications for stirring Speed approximately 4000 R.P.M. under load. A dispersion cup is supported on a rest on the stand of the stirrer and has a removable baffle. For operation on 230V A.C. supplied with dispersion cup or baffle cup.

auto claves, Bacteriological Incubators, binocular research microscopes

aluminium tank

liquid agitator, Air Blower, Air Washers, Air Coolers, Air Blowers

Humidity and Temp. Control Cabinet, Rotary Flask Shaker