Shearing Machine Dealers in Delhi

• Size: As per client
• Operation Mode: Automatic

Only qualitative raw material can result top-notch product range. Thus, we procure it from dependable names in the industry and that too after complete quality confirmation. Our storage unit is inclusive of all required amenities essential for a safe storage of the products. The unit is supervised by efficient personnel ensuring zero damage to the stored items. Features Precision engineered Dimensionally stable Impressive power

Our company is offering a wide range of Shear Strength Testing Machines, which is a common way to determine the shear strength of adhesives for bonding materials and to test welds (plastics and metals). These machines are important to designers of film and sheet products that tend to be subjected to shear loads, or in applications where applied crushing loads are a risk.Specifications :ENTEK-037 Unconfined Compression Testing Machine BS 1377, ASTM D2166,AASHTO T208 Proving ring type, Motorised cum Hand with 3 rate of strains 1.25, 2.0 & 2.5 mm/min. with plain platen, Adaptor steel ball & Pair of conical Seating. Cap. 50 kN. 220V, 1 Ph,50 cycles, AC supply.   Accessories: High sensitivity Proving ring 2KN cap & calibration Certificate. Dial gauge 0.01 mm x 25 mm travel. Coning Tools 38mm, 50 mm, 75 mm & 100 mm male & female ENTEK-038 Triaxial Cell IS:2720 (P-Xi & Xii) BS 1377, ASTM D2850,D4767, AASHTO T296,T297 for testing specimen of size: 38 mm dia X 76 mm long. Perspex (Acrylic Plastic) chamber with an anvil and a loading plunger. The cell is easily split by releasing four tie rods. Leak proof upto 10 kg/cm.sq fluid pressure. An oil plug and air vent are provided for introducing a thin layer of oil over water. This provides an effective seating at the plunger for long duration tests. The cell is fitted with four ball valves of no-volume change type, at the base. Complete with Perspex Loading pad for 38 mm, Plain Perspex discs-2, Porous stones 38 mm-2, Sheath stretcher, Sand former, Drainage tube, short, drainage tube long, O ring-2, Brass pedestal & Rubber sheath - dozen. ENTEK-039 : Triaxial Cell for 38 mm dia x 76 mm long & 50 mm dia x 100 mm long with accessories as above for 38 mm dia & 50 mm dia.ENTEK-040 : Universal Triaxial cell for 38, 50 & 100 mm dia specimen with accessories stated as above for 38, 50 & 100 mm dia.ENTEK-041 : Lateral Pressure assembly 10 kg/cm. sq. (150 psi) with foot pump.ENTEK-042 Bishop Pore Pressure 10 kg/cm.sq. cap. (1000 kPa) : Consists of Pressure gauge. Bourdon tube type 200 mm dia Manometer Glass U tube, measures low positive and negative pore pressure and helps to check zero error of pressure gauge. It is provided with a mercury trap. (Mercury supplied at extra cost).Null indicator, Perspex with mercury trap and cursor to indicate the mercury level. Burette 50 ml for measurement of volume change in the soil specimen, Pressure pump, fitted with four ball valves, copper coil & water reservoir. Note : All above parts are fixed on a panel suitable for mounting on the wall.

• Weight: 100-1000kg
• Application: Metal Cutting
• Automatic Grade: Automatic
• Warranty: 5years
• Surface: Polished
• Features: Durable, Fine Finished

    Alligator Shear Machine is a efficient scrap shearing solution, capable of handling diverse materials like TMT Bar, Angle Channel, Round & Bar. With a broad shearing jaw, pedal control, and high-quality blades, this machine ensures precision cutting and increased productivity. Whether you're dealing with industrial scraps or construction materials, the Alligator Shear effortlessly operates as your go-to shear machine, making it an indispensable asset for your operations.

• Condition: Used
• Automatic Grade: Semi-Automatic
• Brand: LORENZ, Meshmatic
• Max Gear Width: 60 mm
• Material: Metal
• Power Source: Electric

Our product range is secured properly with premium packaging materials that protect the products from mechanical damage and ensure the product delivery is safe and without damage. Our well-maintained and capacious warehouse helps us in managing systematically arrangement of goods and meeting massive requirements of the clients at a time. Cold Shearing Machine is highly appreciated for its quality packaging, durability, and unique design.    

• Brand Name: Hysan
• Rated Power: 15 HP
• Blade Length: 800 mm
• Max Opening: 580 mm
• Max Force: 3100 kN
• Number of Strokes: 10-14/min
• Pressure: 2400 Psi

• Features: Hassle-free performance , Easy to use , Less maintenance cost

• Driven Type: Electric
• Automatic Grade: Semi Automatic
• Type: Stud Welding Machine, Drawn Arc Technology
• Voltage: 440V
• Condition: New
• Warranty: 2years
• Country of Origin: India

STUDMASTER® SMDA series are professional machines for Shear Stud Welding & Drawn Arc Stud Welding Specially Designed for Welding Shear Connectors & Drawn Arc Studs Different models starting from 12mm upto 32mm Welds Studs directly on the job in seconds No drilling, no riveting No additional filler material required High duty cycle Excellent results Proudly MADE IN INDIA RANGE: UPTO 32MM SHEAR STUD

• Country of Origin: India
• Type: Electric Machine Tools
• Material: Carbon Steel, Copper, Stainless Steel, Steel, 1000W 220V Electric Sheep Shearing Machine Clipper Shears Cutter Wool Scissors Tool
• Certification: ISO Certified, ROSH Certified, 1000W 220V Electric Sheep Shearing Machine Clipper Shears Cutter Wool Scissors Tool
• Application: Machinery Use
• Grade: BS
• Color: Black-grey, LIght White, White, 1000W 220V Electric Sheep Shearing Machine Clipper Shears Cutter Wool Scissors Tool
• Condition: 1000W 220V Electric Sheep Shearing Machine Clipper Shears Cutter Wool Scissors Tool
• Finishing: Polished, 1000W 220V Electric Sheep Shearing Machine Clipper Shears Cutter Wool Scissors Tool
• Power Source: Electric
• Name: R s surgical works
• Product: 1000W 220V Electric Sheep Shearing Machine Clipper Shears Cutter Wool Scissors Tool
• Product Name: 1000W 220V Electric Sheep Shearing Machine Clipper Shears Cutter Wool Scissors Tool

• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Voltage: 110V, 220V, 380V, 440V
• Condition: New
• Automatic Grade: Automatic
• Rated Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Mechanical
• Warranty: 5years

Our Mechanical Shearing Machines have been designed & developed through structural analysis technique for continuous Production, Accuracy and Repeatability.Rigid, Interlock Designed, and Heavily Welded construction of MS plates and sections is meant to take full load with minimum deflection. The arm is guided throughout its length by fiber guide-ways ensuring proper clean cut. A rigid clutch mechanism is provided for giving continuous strokes for production.The spring loaded Mechanical Hold Down maintains a positive and uniform pressure along the full length of work piece avoiding slipping and bowing of sheet resulting a clean square cut.Our Mechanical Shearing Machines are provided with four edge rectangular high quality High Carbon High Chromium (HCHC) knives for longer life. PHOSPHOROUS BRONZE Bushes are provided in all running parts. A rigid and accurate mechanical back gauge & hand operated Single Shot or Motorized Lubrication system is provided with all DEVSON shears as standard equipment depending upon the size of machine.

We are offering shearing machines.

• Condition: Used Machines
• Application: Industrial
• Stroke Length: 150 Mm
• Warranty: Paid Warranty
• Brand Name: Fellows
• Dimensions: 20 inch dia. x 5.7 inch face X 3 DP fitted with 8 inch riser
• Maximum Module: 8
• Riser Block: 150 Mm

Machine is placed out of india and this machine will be purchased for you on your request. If you have any query, please feel free to contact us.

This powerful shearing machine has a patented Floating fork system to provide an even pressure across the Comb and cutter, using less pressure and prolonging the life of the comb and cutter by up to 50%. SpecificationsMotor power: 320 WattsSpeed: 2400 dbs/minLength: 350 mmWeight: 1530 gNoise emission (LpAm): 80 dB (A)Battery clippers 12V Patented shearing system. Thermal overload protection switch. Solid and robust Shears in remote locations. Running time of 4 to 5 hours with a battery of over 50 Ah. Comes complete with carry case and instruction manual.

Based in Delhi, we are a prominent Manufacturer, Exporter and Supplier of Shaping Machine from India. Our Shaping Machine comes loaded with all the latest features for meeting diverse requisites of the clients and specifications of the application. Available in variegated specifications, the Shaping Machines are precisely designed as per set industry standards. Every machine is well equipped with close grained and heavily ribbed castings designed to withstand the heavy stresses generally counted in shaping operations. It has wear compensating devices on all sliding parts. Also, it facilitates easy ram stroke adjustment. The machines are highly efficient and durable. They are easy to operate and ensure low maintenance. We offer Shaping Machines at market leading prices.

• Voltage: 220V
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Elecric
• Warranty: 1year

Sheep Shearing Machines are used for the shearing of wool from sheep. Our company is the sole distributor in India for Lister Shearing Equipment Limited; England, the principal manufacturer of this technology. Lister machines are respected and used around the world owing to their superior technology and quality over their counterparts. The machines are used by most state government and central India wool boards in India. JCPPl is the only company in India appointed by Lister to quote and supply the machines on their behalf. Our company is also the only which provides working demonstrations, imparts  training to local shearers and also provides after sales service. The machines are used in the various industries using fur, wool and leather. There are various models for the same. For more,  details kindly go through the brochures or contact us with your queries.

• Brand Name: MOTIONTEK SERVICES
• Driven Type: Hydraulic
• Condition: New
• Automatic Grade: Automatic
• Voltage: 440V
• Warranty: 1
• Country of Origin: India

Hydraulic Gantry shearing machine is a kind of equipment suitable for heavy steel scrap shearing processing. The tonnage of gantry shearing machine produced by our company is 300- 1500 tons, and the width of cutting mouth of conventional hydraulic gantry shearing machine is 600 to 2000 mm, which is applicable to light and thin steel, steel bar, steel plate, nickel plate, steel plate, round steel, steel pipe, scrap copper, scrap steel, scrap iron, light metal structural parts, stainless steel, metal pressing block, car body, aluminum alloy, copper, scrap iron, steel wire For the crushing and processing of heavy waste and winding materials that cannot be processed by scrap crushing equipment such as automobiles and metal briquettes, the working efficiency of this series of hydraulic gantry shear equipment can reach 2-3 times/min according to the model because of the new electro-hydraulic control system and reinforced oil cylinder. The application of this machine has solved the problem of crushing and regeneration of large heavy waste furnace charge, and is widely used in steel rolling plants, metallurgical plants, and scrap treatment and recovery units. It is effective equipment for metallurgical furnace charge treatment and profile cutting.

• Type: Shaping Machine
• Certification: CE Certified
• Weight: 100-1000kg
• Color: Grey
• Voltage: 220V
• Rated Power: 1-3kw, 3-5kw, 5-7kw
• Automatic Grade: Automatic
• Warrenty: 1 Year

Ideal For Making Bra Cup Shapes With Different Dies  Hydraulic Operated Automatic Machine And Also With Steam Generating Attachments

Made from steel plate frame Welded construction Cuts both plates and flat bars Blade of high grade tool steel

• Voltage: 220V
• Function: Packing, Sealing
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Weight: 100-1000kg

• Material: Cast Iron
• Usage: Industrial
• Voltage: 220 V
• Power Source: Electric
• Phase: Single Phase
• Finishing: Polished
• Type: Automatic
• Country of Origin: India