Shenovac Engineers New Rohtak Road, Delhi

Type : Single Stage Vacuum Pump

Brand Name : Shenovac Engineers

Number Of Stages : Single stage

Max Flow Rate : 330 m/Hr

Power : 15 HP

Phase : three

Material : Cast Iron

Motor Speed : 1440 RPM

Power : 2 HP

Color : Silver

Warranty : 1 Year

Country of Origin : Made in India

Packaging Type : Bottle

Brand Name : Shenovac

Country of Origin : Made in India

Features : High performance , Application specific design ,Sturdy construction ,Robustness.

Brand Name : SHENOVAC

Voltage : 230 V

Rated Power : 1.0 HP

Brand Name : Shenovac

Pressure : 240 mbar

Warranty : 1 Year

Power Source : Electric Blower

Voltage : 220/440 V

Color : Silver

Country of Origin : Made in India

Voltage : 220 to 440 V

SHENOVAC Water-ring Vacuum Compressor (Liquid Ring) Pumps are of rotating positive displacement Pumps. These pumps are not only used as Vacuum Pumps but can also be used as Compressors too. The Pump compresses gas by rotating a vaned impeller which is mounted eccentrically to the axis of the Pump casing. Sealing water forms a moving cylindrical ring against the inside of the casing. This creates a series of seals between the impeller vanes and liquid ring. Gases drawn into the Pump through an inlet port get trapped in the impeller cells, are compressed and goes to the next stage where they get compressed again, due to reduced volume caused by the rotation of the impeller, are discharged through exhaust port. Further, the process will allow the pump to automatically invent the quantity of liquid that will be discharged through exhaust port thereby removing the heat of compression from the Pump.The Main Casing and almost all the components of the Pumps are made from Cast Iron. However, to meet specific applications, we can offer the Pumps & their components with special materials like SS-304, SS-316 and PH Bronze on request.SHENOVAC Water-ring Vacuum Compressor (Liquid Ring) Pumps are available in Single Stage. The Single stage pumps are much better choice if we handle solvents at higher vacuum level at 710 mmHg subject to provision of the sealant water level is below 30 deg C & pressure at the site is 760mm Hg. The technology in Single Stage Water-ring Vacuum Compressor is designed to operate at vacuum levels upto 710 mmHg. Salient Features & Advantages Trouble/Maintenance free performance Prompt after sales service Manufacturing with High Quality material & Study construction Affordable costs Vibration free & Low Noise High Suction Capacity & Oil free compressed air Almost all gases & vapours can be pumped and the pumped gases can be saturated with vapour Advanced design & technology in manufacturing process Available as per specifications within a short span of period. Ready availability of spare parts Applications SHENOVAC offers a wide range of Water-ring Vacuum Compressor (Liquid Ring) Pumps, having a capacity from ..51 m3/Hr to ..2030 m3/Hr (For details, please refer to our catalogue). These Pumps are ideally suited for Solvent (vapour) recovery, Breweries & Distilleries, Pharmaceuticals, Chemical, Plastic, Metallurgical, Power Plants, Furnaces, Cement, Fertilizer, Tiles & Ceramics Industries, Garment & Textiles, etc. The Pumps are also suitable for host of various other applications such as, Extrusion, Dehydration, Vacuum Impregnation, Conveying, Priming, Filtration & Sterilization purposes etc.

100% Oil Free Diaphragm Vacuum Pumps / Compressors are completely oil less with continuously rated built in motor. These are preferred due to their minimal maintenance & compact size as compared to sliding vane type vacuum pumps & reciprocating piston type air compressors. Working Principle: In reciprocating motion, with a short stroke, the diaphragm at the top of the connecting rod flexes up and down in a closed chamber, creating pressure or vacuum. Even at maximum duty, output air is cool and oil-free. As ambient air enters and leaves the heat, it never goes near the motor to pick up heat and foreign matter, cooler temperatures add to overall efficiency and service life. The connecting rod is bonded to its bearing not clamped as in light duty pumps. Ensuring greater strength and durability where work loads are greatest. Features No lubricating required hence oil free. Built in continuous rating motor, available in both 1 & 3. and variable voltage of 110V and 220 V3. Portable & light weight due to Die-cast Aluminum construction. Low Noise Level Can be offered with Teflon coated or with PP wetted parts for chemical resistive application (C-suffixed models) Double head models can be easily connected in either series or parallel connection to give higher vac/ pressure or higher flow. Available with special diaphragm options (Teflon coated, viton etc.) Available in stainless steel construction (SS316/316L/304) Standard fitments such as receivers, solenoid valves etc. are available on demand. Applications As Compressor Flame photometer Spectrophotometer Agitation as in electroplating Chemical analyzer Oxygen generating set Breathing apparatus like nebuliser & respirator Ozone generators Artist spray painting Plastic welding Cement aeration Operating hand pneumatic tools Wave soldering machines for foaming of flux Laminating press Applications As Vacuum Pump Gas monitoring Chemical analyzer Environmental & pollution control equipments Labeling machines De-soldering suction Vacuum filtration in labs Gold refining & jewellery making machine Photographic developing machines Glass forming Dental equipments Gas charging in A/C

Type : Belt Drive Rotary Vane Pumps

Brand Name : SHENOVAC

Number Of Stages : Double Stage

Max Flow Rate : 500 LPM

Country of Origin : Made in India

We develop and supply direct drive high vacuum pumps and air cooled direct drive pumps made by shenovac engineers, new Delhi, India. This types of pump falls under high vacuum pumps category. These are also called laboratory vacuum pumps and pharma industry vacuum pump. This types of are unique in function and quality because they are made using high grade material and accessories like- cast iron and aluminum casting, fiber vanes, moisture trap, vacuum gauge, regulators. Vacuum pump direct drive is available in sv- 100 dd to sv 1000 dd models with 100 lpm to 1000 lpm capacities range

Type : Oil Lubricant Vacuum Pumps

Brand Name : Shenovac

Number Of Stages : Single stage

Max Flow Rate : 25 M3/Hr

Power : 1 HP

Phase : 3 Phase

Material : Aluminium

Motor Speed : 1440 RPM

Country of Origin : Made in India

Brand Name : SHENOVAC

Number Of Stages : Single stage

Max Flow Rate : 50 LPM to 7500 LPM

Country of Origin : Made in India

SHENOVAC Water-ring Vacuum Compressor (Liquid Ring) Pumps are of rotating positive displacement Pumps. These pumps are not only used as Vacuum Pumps but can also be used as Compressors too. The Pump compresses gas by rotating a vaned impeller which is mounted eccentrically to the axis of the Pump casing. Sealing water forms a moving cylindrical ring against the inside of the casing. This creates a series of seals between the impeller vanes and liquid ring. Gases drawn into the Pump through an inlet port get trapped in the impeller cells, are compressed and goes to the second stage where they get compressed again, due to reduced volume caused by the rotation of the impeller, are discharged through exhaust port. Further, the process will allow the pump to automatically invent the quantity of liquid that will be discharged through exhaust port thereby removing the heat of compression from the Pump.The Main Casing and almost all the components of the Pumps are made from Cast Iron except the shaft and impeller. However, to meet specific applications, we can offer the Pumps & their components with special materials like SS-304/SS-316 on request.SHENOVAC Water-ring Vacuum Compressor (Liquid Ring) Pumps are available in Double Stage. The Double stage pumps are much better choice if we handle solvents at higher vacuum level at 720 mmHg subject to provision of the sealant water level is below 30 deg C & pressure at the site is 760mm Hg. The technology in Double Stage Water-ring Vacuum Compressor is designed to operate at vacuum levels upto 720 mmHg. Salient Features & Advantages Trouble/Maintenance free performance Prompt after sales service Manufacturing with High Quality material & Study construction Affordable costs Vibration free & Low Noise High Suction Capacity & Oil free compressed air Almost all gases & vapours can be pumped and the pumped gases can be saturated with vapour Advanced design & technology in manufacturing process Available as per specifications within a short span of period. Ready availability of spare parts Applications SHENOVAC offers a wide range of Water-ring Vacuum Compressor (Liquid Ring) Pumps, having a capacity from 81 m3/Hr to 1080 m3/Hr (For details, please refer to our catalogue). These Pumps are ideally suited for Solvent (vapour) recovery, Breweries & Distilleries, Pharmaceuticals, Chemical, Plastic, Metallurgical, Power Plants, Furnaces, Cement, Fertilizer, Tiles & Ceramics Industries, Garment & Textiles, etc. The Pumps are also suitable for host of various other applications such as, Extrusion, Dehydration, Vacuum Impregnation, Conveying, Priming, Filtration & Sterilization purposes etc.

We develop and supply direct drive high vacuum pumps and air cooled direct drive pumps made by shenovac engineers, new Delhi, India. This types of pump falls under high vacuum pumps category. These are also called laboratory vacuum pumps and pharma industry vacuum pump. This types of are unique in function and quality because they are made using high grade material and accessories like- cast iron and aluminum casting, fiber vanes, moisture trap, vacuum gauge, regulators. Vacuum pump direct drive is available in sv- 100 dd to sv 1000 dd models with 100 lpm to 1000 lpm capacities range. Salient Features Compact in design and minimum in weight Advanced lubrication by high capacity integral oil-pump ensures reliable running even at high gas loads. Low noise levels and minimum vibration. Easy inspection of oil through oil label window. Easy maintenance of shaft oil seal. Thoroughly tested on Pirani and Mc. Leod gauge. Fitted with Anti-oil suck back system. Ultimate vacuum 10-3 mbar. Displacement from 100 lit./min. to 500 lit./min. Applications Leak-testing and in many vacuum jobs. Evacuation of vacuum system. T.V. Tube. Vacuum flasks. Any type of bulb and tube. A.C. and refrigeration. De-aeration. Moulds. Filtration and distillation. Bright annealing. Laboratories for Research & development

Advanced lubrication by high capacity integral oil-pump ensures reliable running even at high gas loads. Low noise levels and minimum vibration. Easy inspection of oil through oil label window. Easy maintenance of shaft oil seal.Thoroughly tested on Pirani and Mc. Leod gauge.

In reciprocating motion, with a short stroke, the diaphragm at the top of the connecting rod flexes up and down in a closed chamber, creating pressure or vacuum. Even at maximum duty, output air is cool and oil-free. As ambient air enters and leaves the heat, it never goes near the motor to pick up heat and foreign matter, cooler temperatures add to overall efficiency and service life. The connecting rod is bonded to its bearing not clamped as in light duty pumps. Ensuring greater strength and durability where work loads are greatest.

Brand Name : Shenovac

Max Flow Rate : 45 LPM

Country of Origin : Made in India

Model Number : SV-75s

Voltage : 220 V

Pressure : Up to 16 Bar

Material : Carbon

Thickness : 1.2 mm