Shilpi Cable Technologies Ltd Badarpur, Delhi

Wiring Harness for each vertical of automotive Industry, as small as 2 wheeler to as big as Commercial vehicle harness, Shilpi Cable gives solutions to wiring connectivity of a vehicle from modular to complete assembly from head to tail Harness for 2/3 Wheelers Harness for Commercial Vehicles Harness for Utility Vehicles Harness for Tractors Note:Values typical, guaranteed within 5 % Any dimension could be changed without prior information under the organization's continual

Weatherproofing kit for connectors and splices, include butyl rubber tape and PVC tape . It provides a multi-layer, long-term environmental seal over multiple connections.This specially designed kit is made to give a longer life to the wires and connections.     It includes: Six rolls of 2-1/2'' butyl rubber tape Two rolls of 3/4'' (19mm) PVC Electrical tape. One roll of 2'' (51 mm) PVC Electrical Tape. Features The application of sealing materials to antenna, cable and grounding connections The application of sealing materials to antenna,cable and grounding connections, protecting them from weather conditions These prevent moisture penetration and loosening of connections from vibrations caused by strong winds Electrical Tape Electrical tape used in Shilpi weatherproofing kits is a high quality insulating tape. It has excellent resistance to: abrasion, moisture, alkalies, acid, copper corrosion and varying weather conditions (including sunlight). Advantages Excellent self amalgamating and high adhesiveness Good compatibility with other material Easy to match various shaped surface Good water-proof property UV- and ozone-resistant   Butyl Tape Butyl tape used in Shilpi weatherproofing kits is an elastomeric butyl rubber-based extruded sealant on silicon release paper, designed for sealing a variety of construction joints.This product is very resistant to ultraviolet light. Application Repairing outer sheath of telecom cable For water-proof protection of joint of telecom equipment antenna and feeder For water-proof protection of joint of aerial insulation conductor Notice: Please be careful to protect the surface of C-Frame and hardware. Shilpi disclaims any resposibility for the result of improper usage. Regulatory Compliances | RoHS Compliant (S-MA-QA-F-21C) Rev-01, Revised: 01 July 2013 01 Jan 2007

Telephone cables is a pair of copper wires runs from a box at the road to a box (often called an entrance bridge) at your house. From there, the pair of wires is connected to each phone jack in your house. Along the road runs a thick cable packed with 100 or more copper pairs. Depending on where you are located, this thick cable will run directly to the phone company's switch in your area or it will run to a box about the size of a refrigerator that acts as a digital concentrator. All sizes of telephone cables are available from 2 pairs to 60 pairs.

Telephone cords is a pair of copper wires runs from a box at the road to a box (often called an entrance bridge) at your house. From there, the pair of wires is connected to each phone jack in your house.

Telephone cables is a pair of copper wires runs from a box at the road to a box (often called an entrance bridge) at your house. From there, the pair of wires is connected to each phone jack in your house. Along the road runs a thick cable packed with 100 or more copper pairs. Depending on where you are located, this thick cable will run directly to the phone company's switch in your area or it will run to a box about the size of a refrigerator that acts as a digital concentrator. All sizes of telephone cables are available from 2 pairs to 60 pairs.   JASOD611 AVSS SHILPI twisted paired cables are best suited for telephone and switchboard cabling applications. the conductor is made of solid annealed, high conductivity bare copper. The conductor is insulated with special grade high-density polyethylene with different colours. The insulated cores are twisted with uniform lay to form pairs and are bunched together in such a manner so as to minimise cross talk. In 50 and 100 pair cables the units of 10 and 20 pairs respectively are identified with colour binders and stranded to form the laid up cable. The laid up cable is further jacketed with a grey colour fire retardant (FR) PVC specially formulated and manufactured in-house, with high oxygen and temperature index. The cables can be used for switchboard and internal telephone wiring in high-rise buildings, offices, factories, hotels, residential complexes, etc. They generally conform to ITD specifications G/ WIR-06/02. May 94. Stringent quality control at every stage, from raw material through manufacturing, upto the finished product, guarantees high quality.

Dealing in Surge Arrestor.

Solar cable is the interconnection cable used in photovoltaic power generation. A solar cable interconnects solar panels and other electrical components in the photovoltaic system. Solar cables are designed to be UV resistant and weather resistant. It can be used within a large temperature range and are generally laid outside.   The cable is tested to last 25 years. All sizes of solar cables from 0.5 SQMM to 300 SQMM are available.   Special Properties of Solar Cables   Lifetime reliability: lasts up to 30 years even under tough external conditions. Outdoor durability: resists extreme temperatures (-40°C to 120°C maximum at the core) and ozone resistant. UV resistance: full protection against ultraviolet rays. Halogen-free: Low Smoke Emission & Low Toxicity/Corrosivity during fire. Properties against fire: flame retardant, fire retardant. Flexibility and stripability: for fast and easy installation. Fully recyclable: in accordance with new environmental regulations. Easy installation with color identification (blue, red). Suitable to common connector types. UL, TÜV, UTE and IMQ-certified.   Constituents   Shilpi Solar Cables are manufactured with the following materials   Annealed Tinned Copper Conductor Cross Linked Polyolefin Compound Zero Halogen Polyolefin Compound   Required Features of Solar cable   Chemical Features Weather resistant Resistant to mineral oils Resistant to acids & alkaline Thermal Features Maximum conductor temperature of operation-120° C during 20000 hours Minimum operating temperature: - 40° C TUV Certification   Electrical Features Voltage rating : 1.5 (1.8) KV DC / 0.6/1.0 (1.2) KV AC High voltage test: 6.5 KV DC for 5 minutes. Mechanical Features Resistant to Impact , tear & abrasion Minimum bending radius – 4 times of overall diameter. Safe pulling force -50 N/sqmm.  

SCTL is one of the leading enamelled copper wire producer in INDIA. Our company is using the state of art machinery for enamelled copper wire production. We can produce enamelled copper wire according to national and international standards such as IEC, & NEMA. The aim of our company is to produce high quality enamelled copper wire. Quality control team strictly applies quality control test at every step of production. SCTL is always the disposal of its client to provide technical assistance and share its vas experience with them.   MARKING Each spool & carton shall be labelled with the following with indelible ink : i) Manufacturer's Name and / or Trade mark. ii) Material code No. iii) Type of enamel. iv) Type of covering. v) Size of wire in swg/mm. vi) Net weight of wire. vii) Batch No.   STORAGE   The spools shall be stored on racks and in dry atmosphere. Please pay attention to the following points when storing wires for a long period of time. i) Never store wires in an area exposed to direct sunlight. ii) Avoid high-humidity environments. iii) Avoid special environments (gasses). iv) Be sure that no electric wire will hit other articles or other wires. v) Never store wires in a dusty area.

Radio Frequency cable is used as a transmission line for radio frequency signals. Its applications include feedlines connecting radio transmitters and receivers with their antennas. RF cable also provides protection of the signal from external electromagnetic interference. RF Cables are available in ¼", ½", 7/8", 1-1/4" and 1-5/8" sizes. Copper & Aluminum variants available.

Each Cable Clamp product conforms to most or all brands coaxial cable and are designed to ulimately ease the installation process. Without additional adapters. these clamps can provide sturdy, reliable long term support to system by means of tough and UV material.   Notice: Please be careful to protect the surface of C-Frame and hardware. Shilpi disclaims any resposibility for the result of improper usage. Regulatory Compliances | RoHS Compliant (S-MA-QA-F-21C) Rev-01, Revised: 01 July 2013 01 Jan 2007

Battery cables are used in Original Equipment by India's leading vehicle manufacturers. Manufactured from electrolytic grade, bright annealed, bunched, bare copper conductors, these cables are insulated on state-of-the-art extruders with a special grade PVC compound that is formulated and manufactured in-house. This PVC is impervious to water, petrol, diesel, acids, engine & lubricating oils and grease. It is ideally suited for extreme weather conditions. These cables undergo stringent quality checks during manufacturing process and at the final stage. They are available in red and black colours in 25-metre and 100-metre coils / drums. These cables are also used in other applications where batteries are used, e.g. telecommunication, power, computers, etc. where the D.C. voltage does not exceed 100 volts. These cables are long-lasting and ensure proper distribution of power in the vehicle.

Renewable energy is energy that comes from resources which are continually replenished such as sunlight, wind, rain, tides, waves and geothermal heat. We provide solar solutions for telecom cell site, roof top solar plant and Mega watt power plant including survey, design, supply, installation, commissioning, and integration. We provide project management and consultancy also.

Electrical equipment and appliances came with a power cord, which connects them to mains via an electric plug mounted on a wall. Some of these power cords are fixed whereas, others are detachable. Detachable power cords come with a socket at one end and a pin at the other. Fixed power cords are attached with the appliance. Some of these cords, which are attached with sensitive instruments or audio/video equipment contain a shield in order to, minimize electromagnetic interference. Same power cord can be used with multiple devices and appliances depending upon the socket or the pin. Power cords sets are available in market and they come with few accessories such as leakage current detector, pilot lamp and fuses for over-current protection. We manufacture high quality power cords, duly tested and checked by our experts. These cords are safe to use and ensure high performance of the appliance attached with.

SHILPI is the industry leader in the manufacturing of Electric Wires & Cables in India. We are a customer focused company, and always keen to develop wires & cables to meet the specific market segment. During financial year ending March 2013 SHILP has achieved a Sales turnover of Rs. 654 Cr. We are committed to interacting with our customers to deliver innovative cable solutions that increase productivity and safety. SHILPI is also a ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007 and ISO TS 16949 certified cable manfaturer. SHILPI announces the launch of Solar Cables to support Renewable Energy initiative of the world. Solar Cables are designed to meet the growing needs of the solar industry. Our solar cables is just the beginning of our plans to develop and launch green technology in wires & cables. Solar Cables are flexible and are resistant to abrasion & moisture. Regardless of your panel-to-grid needs, we have the cables to meet your requirements. Applications These cables are designed for connecting photovoltaic power supply systems. These cables can be used indoor & outdoor for flexible and fixed installations with high mechanical strength in extreme weather conditions. Standards 2 Pfg 1169/08.2007. Maximum Temperature at Conductor: 120°C (20000h) Short Circuit Temperature: 200°C (at conductor max. 5sec) Thermal Endurance Test: According to EN 60216-2 (temperature index +120°C) High Temperature Pressure: Test according to EN 60811-3-1 Damp – Heat Test: According to EN 60068- 2-78 1000 hrs. at 90°C with 85% humidity Mechanical Characteristics Minimum Bending Radius: 5 x OD (fixed), 15 x OD (occasional flexing) Dynamic Penetration: According to requirement of Cables for PV systems 2 Pfg 1169/08.2007 Annex F Notch Propagation: According to 2 Pfg 1169/08.2007 Annex G Tensile Strength: 6.5 N/mm2 for insulation and 8 N/mm2 for sheathing – according to EN60811 Elongation of Insulation and sheathing: 125% – according to EN60811 Anticipated Period of Use: 25 years Shrinkage: 2% at 120°C according to EN 60811-1-3 EU Directives The cables are RoHS (Restriction of certain Hazardous Substances) compaliant as per EU Directives 2002/95/EC Chemical Characteristics Mineral Oil Resistance: according to EN 60811-2-1 Ozone Resistance: according to EN 50396 part 8.1.3 Method B Weathering-UV Resistance: according to HD 605/A1 or DIN 53367 cables confirm to TUV specificationst. TYPE 2 DC Solar Cables are Single core Copper cables each for +ve and –ve. They are insulated with HR 105°C PVC compound and and sheathed with UV stabilized HR 105°C PVC compound. TYPE 3 DC Solar Cables are Single core Copper cables each for +ve and –ve. They are insulated with XLPE compound and and sheathed with UV stabilized PVC ST2 compound. B. Array Junction Box to Main Junction Box and Main Junction Box to Inverter These Solar DC cables which are not exposed to sunlight and are always routed through PVC Pipes which are laid underground. Choice of cables can be done from any one of the options given. Generally Option 3 is chosen for this route.     Electrical Characteristics Rated Voltage: 0.6/1 kV AC Rated DC Voltage: 1.5 kV Maximum Permitted DC Voltage: 1.8 kV (conductor/ conductor, non earthed system, circuit not under load) Maximum Permitted AC Voltage: 0.7/1.2 kV Working Voltage: DC 1000 V Insulation Resistance: 1000 M-km Spark Test: 6000 Vac (8400 Vdc) Voltage Withstand: 6500 V as per EN50395 for 5 min Ampacity: According to requirements for cables for PV systems Construction Characteristics Conductor Insulation Sheath Electrolytic Multi Stranded tinned copper conductor flexible as per IEC 60228 Class 5. Insulation Crosslinked Halogen Free & Flame Retardant Sheath Crosslinked Halogen Free & Flame Retardant Sheath in Black/Blue/Red Colour Thermal Characteristics Ambient Temperature: -40°C ~ +90°C Ammonia resistant : 30 days in saturated ammonia atmosphere (internal testing) Very good resistance to oil and chemicals High wear and robust, abrasion resistant Acid & Alkaline Resistance: According to EN 60811-2-1 (Oxal acid and sodium hydroxide) Fire Performance Flame retardant according to IEC 60332-1-2 Low smoke emission < 20% as per ASTM D-2843 Halogen free according to EN 50267-2-1/- 2, IEC 60754-2 Acid gas emission not more than 0.5% as per IEC 60754-1 pH minimum 4.3 as per IEC 60754-2 conductivity maximum 10 as per IEC 60754-2 Toxicity according to EN 50305, ITC- index< 3 Specifications As per TÜV Rheinland specification: 2 Pfg 1169/08.2007. Solar Cables used in Solar Farm installations are mainly categorized as given below: A. PV module to PV module and PV modules to Array Junction Box These cables though not exposed to direct sunlight are throughout the day time exposed to diffused/ indirect sunlight and atmospheric temperatures in open air. TYPE 1 DC Solar Cables are Single core Copper cables each for +ve and –ve. They are insulated and sheathed with Cross Linkable LSOH which has UV as well as Ozone protection properties. These C. Inverter to Transformer Primary The Three Phase AC output from the Inverters is connected to the Transformer Primary through Underground Armoured Cables. These cables are Copper or Aluminium XLPE insulated, GI armoured, UV stabilised PVC ST2. D. Transformer Secondary to RMU/Switchyard The Three Phase AC output from the Tranformer Secondary is connected to the RMU/Switchyard through Armoured Cables. These cables are Copper or Aluminium XLPE insulated, GI armoured, UV stabilised PVC ST2. E. RMU to Switchyard Three Phase AC connection from the RMU is connected to the Switchyard through Armoured Cables. These cables are Copper or Aluminium XLPE insulated, GI armoured, UV stabilised PVC ST2.

LAN Cables – also known as twisted pair cables finds its application in many Ethernet networks and telephone systems. Various ranges of LAN cables like Cat5, cat 5e, Cat6 (FTP, SFTP, UTP) are available.

Dealing in Jumper Cable.

This product is used for mobile network and telecommunication equipment. Grounding kit is a coaxial cable accessory, protecting the coaxial cable system from the damaging effects of lightning, by offering a quick Return path to ground. It is recommended to provide Grounding kit on the RF feeder cable at the top and bottom of the Antenna tower and at the entrance of the transmitter / Receiver. Features Quick and easy installation No loose part No damage to feeder cable Low Contact Resistance (

SAFE PVC INSULATED SINGLE CORE UNSHEATHED INDUSTRIAL (MULTISTRAND) CABLES - FLAME RETARDANT (FR) and FLAME RETARDANT LOW SMOKE HALOGEN (FR+) CONFORMING TO IS-694 WITH BRIGHT ANNEALED ELECTROLYTIC BARE COPPER CONDUCTOR FOR VOLTAGE GRADE UPTO 1100 VOLTS.

Voltage : 1100 VOLTS

Color : Straight

Solar cable is the interconnection cable used in photovoltaic power generation. A solar cable interconnects solar panels and other electrical components in the photovoltaic system. Solar cables are designed to be UV resistant and weather resistant. It can be used within a large temperature range and are generally laid outside. All sizes of solar cables from 0.5 SQMM to 300 SQMM are available.

Telephone cables is a pair of copper wires runs from a box at the road to a box (often called an entrance bridge) at your house. From there, the pair of wires is connected to each phone jack in your house. Along the road runs a thick cable packed with 100 or more copper pairs. Depending on where you are located, this thick cable will run directly to the phone company's switch in your area or it will run to a box about the size of a refrigerator that acts as a digital concentrator. All sizes of telephone cables are available from 2 pairs to 60 pairs.

Power and Control Cable is a flexible instrumentation cable designed for measuring, control or regulation in the field of process automation.It is a highly flexible multicore cable, with (class 5) copper conductors and a galvanised steel wire braid (GSWB) for mechanical protection. The cable is typically manufactured with PVC insulation, bedding and a transparent PVC sheath. Power and control cables complying voltage rating of 300/500V and meets the requirements of both BS6500[3] and VDE0250 standards.

Coaxial cable, or coax is a type of cable is used for radio frequency transmission. All types of Co-axial cables like RG series, LMR series are available.