Shree Balaji Export & Co. Rani Bagh, delhi

The procedure, as recommended in various standards, is for determining the quantity of water required to produce a cement paste of standard consistency. The standard consistency is attained when the 10 mm plunger of the apparatus penetrates the material to a pre-determined depth under free-fall. A new sample is prepared and tested with initial and final needles in accordance with the procedure described in various specifications. Vicat Apparatus consists of a frame bearing a movable rod with a cap at top and a vicat mould in the form of the frustum of a cone, (80+5)/70 + 5mm dia at the base,(70mm+5mm) /60 mm at the top and 40 mm high, and with a glass base plate of minimum 2.5 mm thickness with various models of Vicat apparatus.

Country of Origin : India

Type : Automatic

Certification : CE Certified

Application : Industrial

Weight : 10-20kg

Voltage : 220V

Warranty : 1 Year

Vibrator is mounted over coiled springs. Vibrations are by means of a revolvingshaft with an eccentric. Frequency 12000±400 vibration per minute. Centre of gravity of the vibrator, including the cube and mould is either at the centre of the eccentric shaft or within 25 mm below it. Easy assembling and dismantling of cube mould. Provided with belt guard and a time switch. Suitable for operation in 230 volts, 50 cycles, single phase A.C. Supply.

Country of Origin : India

Type : Automatic

Certification : CE Certified

Color : Blue

Voltage : 220V

Driven Type : Electric

Warranty : 1 Year

Proper compaction of cement concrete while casting specimens for compression testing is desirable to achieve a better and more consistent mixture. Vibrating table is ideally suited for this purpose. The table to is 500 mm x 500 mm and has stops along its edges to prevent moulds from sliding off the table during operation.The maximum load capacity is 140 kg. The variable pitch pully arrangemant permits the frequency to be varied steplessly between 600 cycles/sec. and 430 cycles/sec. Suitable for operation 415 volts,3 phase. 50 Hz. A.C. supply.

Country of Origin : India

Type : Automatic

Color : Blue

Voltage : 220V

Power : 1-2kw

Warranty : 1 Year

Consists of a vibrator table resting upon elastic supports, metal post, sheet metal cone open at both ends, and a standard iron rod. The table is enquipped with an elecrically operatedVibrometer mounted under it by an electric motor, both double ended shaft, working on 220 volts, single phase A.C. supply.The steel cone is 30 cm high, with dia at the bottom 20 cm and at top 10 cm. A swivel arm holder is fixed to the base, into which is telescoped another swievel arm with funnel and guide sleeve. A graduated rod is fixed on to the swievel arm and at the end of the graduated armecords the slump of the concrete cone, and the volume of concrete cone after vibration of cone in the pot. Complete with electrical accessories.

Country of Origin : India

Size : Standard

Type : Automatic

Material : Stainless Steel

Application : Industrial Use

Color : Blue

Voltage : 210-240 V

Finishing : Polished

This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7. 06 cm x 7. 06 cm is pressed tace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolution of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose.The machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable. the machine works on 440 volts A. C. , three phase electrical supply.

Country of Origin : India

Type : Automatic

Certification : CE Certified

Voltage : 220V

Rated Power : 1-3kw

Driven Type : Electric

Warrenty : 1 Year

Application : Industrial

1203. IS 310 (Part II). For testing a wide variety of materials such as grease, bitumen, tar ,wax, polish, food stuffs, rubber, asphalt and pharmaceu-tical creams. By applying a given force over a given period of time depression is made in the sample which may be measured in tenths of a millimeter and expressed as a penetration number.

Country of Origin : India

Type : Automatic

Application : Industrial

Color : Blue

Voltage : 220V

Frequency : 50Hz

Phase : Single Phase

Confirming to ISS-7320. This apparatus used for the determination of workability of concrete where nominal size of aggregate does not exceed 38 mm. The apparatus comprises of a slump cone with foot pieces fitted on a base with wing bolts. A swivel carrying handle fitted with the base also serves as a datum for measuring the slump, when moved into vertical position perpendicular to the base. A graduated tamping rod is used both for compacting the specimen as well as measuring the slump of concrete.

Country of Origin : India

Type : Automatic

Material : Stainless Steel

Certification : CE Certified

Application : Lump Testing

Color : Blue

Voltage : 220V

Warranty : 1 Year

For quick determination of moisture content of materials in powder from i.e. soil sand, coal, pottery, ganister, cement etc. A weighed quantity of the substance under test is placed in the body of the tester together with a measured quantity of absorbent and the tester is then sealed and shaken vigorously thereby bringing the sample and the absorbent into intimate contact. The pressure of gas liberated by interaction of moisture in the sample and absorbent actuates the gauge which is directly graduated in percentage moisture on the wet weight basis. A conversion chart is provided for converting percentage moisture content on the wet weight basis to percentage moisture on the dry weight basis.The unit consists of a pressure vessel with clamp for sealing cap rubber sealing gasket, dial gauge calibrated in percentage moisture content to 25 % on the wet weight basis, counter poised balance for weighing sample, scoop for measuring absorbent, bottle of absorbent, cleaning brush.Complete in wooden carrying case with handle.The Unit can be used to determine percentage moisture contents on the wet weight basis up to 25% which is equal to 33.3% moisture content on the dry weight basis.

Country of Origin : India

Type : Automatic

Certification : ISI Certified

Application : Industrial Use

Power Source : Electric

Warrenty : 1 Year

IS-2720 (Part VII) It consist of a compaction Mould 100 mm DIA. X 127.3 mm height X 1000 cc volume complete with collar and base plate all steel construction.Rammer 2.6 kg X 310 mm controlled fall through a guide tube. Rammer 4.89 kg X 450 mm controlled fall for heavy compaction test as per IS-2720 Part VIII.

Country of Origin : India

Type : Automatic

Certification : CE Certified

Application : Industrial

Color : Blue

Voltage : 220V

Finishing : Polished

Warranty : 1 Year

For the measurement of the resistance to plastic flow of cylindrical specimens of bituminous pouring mixture loaded on the lateral surface. This is for use with hot mixture containing asphalt or tar and aggregate up to 25 mm maximum size.

Country of Origin : India

Type : Automatic

Material : Stainless Steel

Application : Industrial

Color : Blue

Voltage : 220V

Warranty : 1 Year

For determination of resistance to wear of coarse aggregate by abrasion. A rolled steel drum totally closed except for removable dust-tight cover is connected to stub shaft and mounted on steel frame to allow rotation about its axis in a horizontal plane. The drum is rotated by one h.p. electric motor. A heavy duty speed reducer coverts the motor speed to required drum speed of 30 to 33 r.p.m. Inside the drum is provided a steel shelf which can be easily replaced when worm out due to repeated abrasion tests. Supplied with 12 abrasive charges 1 7/8" dia and Revolution Counter fitted to the rotating shaft.

Country of Origin : India

Color : Blue

Voltage : 220V

Meets the requirements of IS 2720 Part V and consists of a brass bowl held on an a rubber of standard hardness by can action. Rubber feet are provided to eliminate rocking while operating. Complete with one ASTM Grooving tool and height gauge. LIQUID LIMIT DEVICE With a counter same as above, but fitted with a counter to register the number of blows. LIQUID LIMIT DEVICE Motorized approximately. Same as above, but fitted with a motor geared down to give 120 RPM.

Country of Origin : India

Type : Automatic

Certification : CE Certified

Application : Industrial

Voltage : 220 V

Power Source : Electric

Warranty : 1 Year

IS-4031.With two glass plates and lead a transparent disc is screwed. The division of the scale on the rod weights. For indicating soundness of cement and limes. A brass cylinder mould split down one side and provided with two parallel indication arms.

Country of Origin : India

Surface : Polished

Laboratory Concrete Mixer is laboratory type & is electrically operated. The counter balance drum is easy to tilt with 1½ to 2 cu .ft. mix. The total drum volume is, however, 3 cu. ft. Mounted on a sturdy rubber tyred stand; the drum is mounted for end discharge and equipped with 1/2 h. p. electric motor, suitable for operation on 220 volts. A. C. single phase.

Country of Origin : India

Type : Automatic

Certification : CE Certified

Driven Type : Electric

Warranty : 1 Year

Color : Blue

Material : Stainless Steel

Useful to determine specific gravity of clays, sand and gravel of size smaller than 10 mm. Specifications : Comprises a 1 kg glass jar with brass cone, locking ring and rubber seal.

Country of Origin : India

Type : Portable

Material : Glass

Shape : Round

Application : Laboratory

Accuracy : 0.15%

IS-2720 (Part XXIX) Consists of a cylindrical core cutter of a seamless tube, 10 cm internal diameter, and 130 mm long, a dolly with lip to enable it to be located on the core cutter, and a rammer with steel rod.

Country of Origin : India

Certification : CE Certified

Application : Industrial Use

Color : Blue

Voltage : 220V

Warranty : 1 Year

As per IS-516-Steel cube Mould 2.78 (7.06 cm) for vibrating machine complete with base plate.Cast Iron Cube Moulds complete with base plate Size 5cm x 5cm x 5cm. -Cast Iron Cube Moulds complete with base plate Size 10cm x 10cm x 10cm.

Country of Origin : India

Type : Precision

Application : Industrial

Color : Blue

Surface Finishing : Polished

Warranty : 1 Year

Size : 15cm x 15cm x 15cm

IS : 2386 (Part I)For determining the elongation index of coarse aggregate. It consists of a steel plate on which 8 steel pins are vertically mounted with specified distance in between. This assembly is mounted on a hardwood base. Tile Flexure Strength Tester. IS : 654-1962. For the determination of breaking load of clay roofing tiles. The equipment consists of two bearing rollers and one loading roller all 40 mm dia. The centers of bearing rollers can be set at 250 mm or 270 mm. The loading is done through a double lever loading system. Maximum capacity of the machine is 2 KN. Lever ratio is 1:12. Supplied complete with 20 kg lead shot.

Country of Origin : India

Size : Standard

Type : Elongation

Material : Iron, Wooden

Application : Industrial

Color : Grey, Brown

Determining of asphalt, cut bitumen and blown type bitumen.It consists of a bath thermostatically controlled with inlet and outlet taps. Fixed and movable brackets are soPositioned that specimen is submerged in water throughout. The rates of pull of 50 mm/min. and 10 mm/min. are incorporated. A clutch arrangement is made to stop the movement of the movable bracket when rupture of the specimen is noticed. Suitable for operation on 230 volts, 50 cycles, single phase, A.C. supply. Complete with three moulds and plates supplied mounted on the apparatus but without thermometer.

Country of Origin : India

Voltage : 220V

Driven Type : Electric

 Loading Unit:- Vertical load, capacity 8 kg/sq. cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load for the applied either througe a steel ball recessed in the loading pad or directly through a base of the loading yoke. shear load capacity 400 kg.Direct shear box for square specimen size 60X60X25 mm complete with one base plate, two plane gripper plates, porous stones and one loading pad. shear box housing,complete with two ball roller strips. Specimen cutter for 60X60X25 mm specimen.

Country of Origin : India

Type : Automatic

Certification : CE Certified

Application : Laboratory Use

Weight : 50-100kg

Warranty : 1 Year

For determination of resistance to wear by attrition. Two iron cylinders 77/8" dia 133/8" long with dust and water-tight covers, mounted on a shaft with their axis inclined at 30 deg. to the axis of rotation of the shaft. Rotation speed is 30-33 r.p.m. Driven by 1 h.p. three phase 440 volts, A.C. Electric motor.

Type : Automatic

Phase : Single Phase

Power : 1-3kw

Material : Stainless Steel

Voltage : 220V

Warranty : 1 Year

Pressure : High Pressure

INTRODUCCTION We would like to introduce ourselves as one of the leading manufacture of Standard Test sieves under the brand name of “ SETHI STANDARD TEST SIEVES” since from 1951 in Delhi. We are also suppliers of Equipment viz. Compression Testing Machine, Benkelman Beam, Bitumen Extractors, Rapid Moisture Meters, Liquid Limit  Device, Sieve Shakers Hand Operated, Sieve Shakers Motorized, Aggregate Impact Value Apparatus, Vibrating Machines, Vibrating Table ,CBR Machines, Proctor Moulds ,Rammer, CBR Moulds, Sand Pouring Cylinders, Slump Cones , Gauging Trowels, Spatulas, Moisture Tins, Marshal Stability Test etc. We hope you are the dealers for the the same  and have regular requirements for the above said items. We would like to request you Please forward us your valuable enquiries. So that We may send you our best pieces at the earliest.

Material : Plastic

Shape : Cube

Color : Blue

Country of Origin : India

Type : Calibration Equipment

Application : Testing Material

Country of Origin : India

Type : Portable

Material : Glass, Plastic

Certification : CE Certified

Application : Lab Use

Color : Available in Many Colors