SKF Bearing Dealers in Ajmeri Gate, Delhi

• Weight: 500 gm
• Material: Stainless Steel
• Brand Name: IKO
• Shape: Round
• Hardness: 45 HRC
• Packaging Type: Box
• Surface Finishing: Polished
• Inner Diameter: 20 mm
• Outer Diameter: 30 mm

We are amongst dominant manufactures of Deep Grove Ball Bearings based in India. We proffer reasonable prices on our noteworthy deep grove ball bearings. Our distinguished deep grove ball bearings are wide accepted by our esteemed clients. Single row deep groove ball bearings accomo­date radial and axial loads and are capable of operating at high speeds. Because of these capabilities and their competitive price, they are the most commonly used bearing type. The misalignment capacity of deep groove ball bearings is limited therefore the alignment of the bearing locations must be carefully con­trolled. Double row deep groove ball bearings of the FAG Standard Programme have no filling slots. Contrary, to their former design they can carry axial loads in both directions. The cage of these bearings is of glass fibre reinforced polyamide 66, which will withstand constant temperatures of 120°C and can operate several hours at temperatures of up to 150°C, over short periods even at temperatures of up to 180°C. The bearings are filled with grease. Double row deep groove ball bearings are not suitable when angular misalignments are to be accommodated. China Wafangdian GWG Bearing Manufacturing Co., Ltd. are specialized in manufacturing bearings, rolling bearing, steel ball bearing with strong design capability. GWG Bearings have four factories and three sales offices. The are bearing factory, roller factory, cage factory, forging factory and sales office in Dalian, Wuxi and Ningbo. Wuxi and Ningbo offices mainly serve the domestic markets, and Dalian office serves the international markets. We mainly make medium and large rolling bearings, capability range from medium bearings with inner diameter of 120mm to large bearings with outer diameter of 3000mm. In addition to our GWG brand, GWG Bearings also provide OEM service and supply non-standard products, rolling bearing, steel ball bearing, sealed bearing, miniature ball bearing, small ball bearing, ceramic ball bearing, deep groove ball bearing, stainless steel ball bearing, Large Deep groove ball bearings, Large diameter Deep groove ball bearings, Custom Deep groove ball bearings, Large size Deep groove ball bearings for special applications. Feature They are the most typical rolling bearings with extensive applications. The raceways in both of the rings are in arc groove form, which can carry radial and axial load in double directions. They can be applied in situations where high-rotating speed and low noise and low vibration are required. Cages Deep groove ball bearings generally use pressed cages of steel sheet or brass cages. When the outer diameter is less than (inclusive)400mm, they use pressed cage with steel sheet. When the outer diameter is bigger than 400mm,they use brass cages. Applications Can be found in automobiles, machine tools, motors, instruments, construct machines, railway vehicles, agricultural machines and various other special machines Types Basic type, With snap ring groove on the outer ring(-N),With one shield(-Z) on one side or two shields(-2Z) on both sides, With one seal(-RS)on one side or two seals(-2RS)on both sides.

We supply an exclusive array of Ball Bearings including Single Row Ball Bearings that find application in a number of automobile industries. Known for their superior quality and durability, our Double Row Angular Contact Ball Bearings are manufactured as per the international norms and standard using high grade raw materials. Showcasing high performance, the Double Row Ball Bearings supplied by us effectively reduces the friction between moving parts. As one of the leading Suppliers, we extend our capability in offering these bearings in different sizes, weights, and dimensions etc as per the specified needs of our clients Click Here For Single Row Ball Bearing Click Here For Single Row Angular Contact Ball Bearing Click Here For Double Row Self Alighing Ball Bearing Click Here For Double Row Ball Bearing Click Here For Double Row Angular Contact Ball Bearing

We are main supplier of this product.

• Material: Stainless Steel
• Shape: Round
• Outside Diameter: 350-400mm
• Bore Size: 6 - 200 mm
• Packaging Type: Box
• Surface Finishing: Polish
• Feature: Optimum Finish, Perfect Strength
• Price Range: 100 rs - 100000 rs

  We supply Roller Bearings, which are manufactured using top-grade chrome steel and can be availed in different bore size, varying from 5-200mm. We have cemented our presence in the market by offering high quality lot that is prepared using the best grade material and modern work methodologies. Also, the material is sourced from the genuine vendors only. Buyers can stay rest assured about the quality of our products as we check each and every product at diverse stages.

• Country of Origin: India
• Type: Needle Bearing
• Color: Silver
• Automatic Grade: Manual
• Shape: Round
• Condition: New
• Number of Row: Single Row
• Usage: Industrial
• Corrosion Resistance: No
• Packaging Size: 5 Pieces
• Chemical Resistant: No
• Bore Size: 10"
• Specialities: Fine Finish
• Inside Diameter: 250-300mm

• Type: Needle Roller Bearings
• Shape: Round
• Application: Machinery
• Color: Silver
• Surface Finishing: Non Polished, Polished

• Feature: Maintenance free, Optimum performance, Durable finish .

High rotating speed High precision Low noise, small vibration Mainly take radial load As well as take moderate axial load

• Material: SS
• Packing Type: Carton Box
• Pack Size: 1 Piece
• Brand: SKF, FAG, NFK, Nachi

Deep groove ball bearings have deep, uninterrupted raceway grooves. These raceway grooves have a close osculation with the balls, enabling the bearings to accomodate radial and axial loads in both directions. These bearings are particularly versatile and are:simple in designnon separablesuitable for high and even very high speedsrobust in operation, requiring little maintenanceDeep groove ball bearings are the most widely used bearing type. Consequently, they are available from SKF in many designs, variants, series and sizes.

Tapered roller bearings are rolling element bearings that can support axial forces as well as radial forces. The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers. This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. The rollers are stabilized and restrained by a flange on the inner ring, against which their large end slides, which stops the rollers from popping out due to the "pumpkin seed effect" of their conical shape.

• Bearing Number: SL182956TBBRXLC3
• Material: Stainless Steel
• Packaging Type: Box
• Type of Bearing: Roller Bearing
• Usage/Application: Industrial
• Outer Diameter: 380 mm

• Brand Name: All Brands Available
• Type: Needle
• Material: Stainless Steel
• Shape: Spherical
• Cage: Brass
• Outer Diameter: 90mm
• Oil Limited Speed: 5600 Rpm
• Grease Limiting Speed: 4500 Rpm

• Brand Name: HRB
• Material: Bearing Steel
• Hardness: 71 HRC
• Tensile Strength: 370 Mpa
• Model Name/Number: UCP209-28
• Elongation: 20%

• sizes available: 30210 ... 32210, 33210 etc

The taper roller design has been with us for many years. Most commonly found in automotive applications (especial heavy commercial vehicles), the taper roller provides many benefits. Its construction allows radial and axial loads to be applied and absorbs impact and shock loads with ease if properly fitted. There are many varieties of taper including back-to-back, face-to-face, sealed and preloaded units.

• Application: in machine
• Material: Mild Steel
• Type of Bearing: bearings
• Bearing Number: 6209
• Weight: 5kg
• Number Of Rows: Single Row
• Part Number: 6209

We are offering bearings roller bearings, automotive contact bearings, automotive angular contact bearings and automotive thrust contact bearings..we are Leading Supplier's & Distributor's

The taper roller design has been with us for many years. Most commonly found in automotive applications (especial heavy commercial vehicles), the taper roller provides many benefits. Its construction allows radial and axial loads to be applied and absorbs impact and shock loads with ease if properly fitted. There are many varieties of taper including back-to-back, face-to-face, sealed and preloaded units. sizes available: 30210 ... 32210, 33210 etc

• Specialities: Low maintenance, Highly performance, Durability

• Feature: dimensional accuracy, optimum performance, high tensile strength, less maintenance, sturdy construction, durability, high functionality

• Brand Name: HCH
• Bearing Number: 626 2RS
• Material: Chrome Steel
• Application: Machinery
• Quantity Per Pack: 125 Pcs
• Steel Grade: SAE-52100
• Number Of Rows: Single Row

• Type: Roller Bearings
• Shape: Round
• Outside Diameter: Standard
• Corrosion Resistance: Yes
• Brand: Shree Shakti
• Automation Grade: Semi-Automatic
• Is It Customised: Customised
• I Deal In: New Only

• Weight: 160gm
• Brand Name: NBR
• Part Number: UCP 207
• Inner Diameter: 35mm
• Type of Bearing: Pillow Block Bearing
• Inner Diameter: 35mm

• Material: Stainless Steel
• Shape: Round
• Bore Size: 20 mm to 150 mm
• Type: Needle Roller Bearings
• Type of Bearing: Roller Bearing
• Bearings Rows: Cross Roller

• Material: Stainless Steel
• Bore Size: 5 - 1400 mm
• Outside Diameter: 10 - 24 mm
• Structure: Thrust
• Surface Treatment: Galvanized
• Separable and interchangeable: The separable components of SKF thrust ball bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections.
• Initial misalignment: Bearings with sphered housing washer can accommodate initial misalignment.
• Interference fit: Shaft washers have a ground bore to enable an interference fit. The bore of the housing washer is turned and always larger than the shaft washer bore.

• Thickness: 3-80mm
• Weight: 2kg
• Capacity: 20L/Hr
• Bore Size: 0-8mm
• Outside Diameter: 0-15mm
• Inside Diameter: 0-50mm
• Overall Length: 6-10 Inch
• Specialities: Shear Strength
• Dimensions (LXWXH): 10X30X9mm
• Brand Name: BUI
• Material: SS
• Shape: Round
• Certification: BUI
• Color: White
• Condition: New
• Finishing: Coated
• Automatic Grade: Manual
• Packaging Type: Packet
• Warranty: 1 Year
• Country of Origin: India
• Number of Row: Single Row
• Corrosion Resistance: Yes
• Packaging Size: 5 Pieces
• Usage: Industrial
• Chemical Resistant: Yes
• Operating Temperature: 50*
• Tensile Strength: 50*
• Noise Level: 50*
• Tolerance: 50*
• Working Pressure: 50*
• Vibration Level: 50*
• Bearing Number: 5
• Product Name: Spherical Roller Bearing