Smoke Sensors Dealers in Pratap Nagar, Delhi

SPECIFICATION  FOR  WIRELESS INTELLIGENT SMOKE  DETECTORS  Brand Name :- Super great and Rapid action Model No.: SS  168Area Coverage ( Max. )  :40 SQ. MTR. WITH 10 F HT.Description: Wireless optical smoke sensorCompatibility: All Super great and Rapid action analogue system through radio wavesMounting: Plugs into surface baseMonitoring: Continuously self checkingIndication: Alarm Detection principle: Photo electric light scatter Operating voltage: 9 volts DC batteryAddressing method: Unique address embedded in detectorEnvironmental Application: Indoor useConstruction Material: Moulded ABSDimensions: 106mm (Dia) x 36mm (H) Colour: White Warranty  : 12 months from the date of Invoice.Spare Parts : Not Required 

System Sensor 200 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with decade address switches, providing exact detector locations for selective maintenance when chamber contamination reaches an unacceptable level. Model 2251B photoelectric detector’s unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. Dual electronic thermistors add 135°F fixed temperature thermal sensing on the 2251TB. Specification Height : 2.0 inches (51mm) Diameter 6.1 Inches installed in B210LP base4.1 inches (104 mm) installed in B501 base Shipping Weight Heat 4.8 oz. (136 g)/li>Photo/phot with heat 5.2oz. (147 g) ion 5.4 oz. (153 g) Operating Temprature Range Ion Photeo : 32-1200F (0-490C)Photo with Thermal 32-1000F (0-380C)Thermal : -4-1000F (-20-380C)High Temprature : -4-1000F (-20-660C) UL Listed Velocity Range Ion : 0 - 1200 fpm (0 - 6.1 m/sec)Photo with Thermal : 4000 fpm Suitabe For Installation in ducts Insect Screen Hole Size Photo : 0.016 inch (0.41mm) nominalIon : 0.035 Inch (0.8mm) nominal Relative Humidity : 10-93% noncondensing Thermal Rating Fixed Temprature Setpoint : 1350F (570C)Rate of Rise Detection : 150F/min (8.30C/min.)High Temprature Heat : 1900F (880C) Voltage Range : 15-32 Volts DC Peak Standby Current (Max. Avg.) Ion/Thermal : 150 pA @ 24 VDC (without communication, LED off) 200 pA @ 24 VDC (one communication every 5 sec. with LED enabled)Photo/Photo With Thermal : 250 pA @ 24 VDC (without communication LED off), 300 pa @ 24 VDC (one communication every 5 sec. with LED Enables) LED Current (Max.) : 6.5 mA @ 24 VDC (on)

• Brand Name: Qutak
• Color: White
• Material: Plastic
• Application: Office Buildings
• Power Source: DC (10.8
• Automatic Grade: Automatic
• Voltage: 24 VDC to 41 VDC
• Features: Easy installation, Low maintenance , High immunity against unwanted alarms
• Alarm: 5 mA
• Frequency: 3-5 Seconds
• When Polled: 22 mA +/-20%
• Standby: 0.17 mA
• Alarm Current: (Max) 60 mA

• Model No: QT 222-WSD

Made of poly-styrene plastic -No wiring is required for any connectivity -Area covers 4.5 mtr. with 10 to 11 feet height -Operates on 9V Alkaline Battery -Comes with TEST button -Blinks in every 35 seconds -Has connectivity with TX Booster

UL approved photo electric sensing head used as sensor Very low leakage chamber used for smoke collection Telescoping tubes used for smoke sampling Easy installation on duct Direct connection to the fire and smoke damper controller

• Feature: High sensitivity and wide detection range Semi-conductive smoke sensor Fast response and recovery

Sensitive material of MQ-2 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exist, The sensor's conductivity is more higher along with the gas concentration rising. Please use simple electrocircuit, Convert change of conductivity to correspond output signal of gas concentration. MQ-2 gas sensor has high sensitivity to LPG,Propane and Hydrogen, also could be used to Methane and other combustible steam, it is with low cost and suitable for different application.

They are standalone battery operated single station detectors which detects the smoke at the incipient stage & alarms before its too late. These are battery operated & no separate wiring or panel is required.

We are offering smoke detectors. Smoke detectors- latest optical detectors from system, usa lonisation smoke detectors: these help in the fast detection of both visible and invisible smoke particles in the range of 0.01 mm to 1 mm. Optical smoke detectors: it provides early warning of a fire condition and is particularly effective in case of slow burning fires such as bedding, foam and plastics. This micro-processor system is suitable for small & medium size premises as it enables to isolate the source of fire, immediately.

Fake Smoke Detector, Fire Extinguisher, Fire Alarm

They are standalone battery Operated Single station Detectors which Detects the smoke at the incipient stage & alarms before its too late. These are Battery Operated & no Separate Wiring or Panel is required.   These Detectors are Ideal for Offices / Godowns / Factories & Residences.   This detector has many features: Low Battery Warning Test Button LED Indicator 85db Alarm Sound

Smoke Detectors, Fire Alarm System, fire alarm equipments