Soil Testing Equipment Dealers in Inderlok, Delhi

• Brand Name: Static Cone

We are offering static cone penetrometer 3000kg. Capacity. (hand operated):- the driven is by means of rack and pinion and is driven manually through a gearing arrangement. The gearbox rack and pinion are fixed on two upright pillars and the movement of the rack is guided by a bracket and two pillars. The loading is done hydraulcially. Tow pressure gauges 15cm dia. One of low capacity 0-60gk/sq.cm.in 0.5kg/cm.sq. Divisions and other 0-160kg/cm.sq.are provided to indicate the penetration resistance. Isolation valve is provided to automatically isolate the lower range gauge when it reaches the maximum capacity. The valve can be adjusted and locked at desired values between 20 to 60kg/cm.sq. Provisions made to anchor the unit at site and there is provision for lateral shifting so that subsequent test could be performed without having to shift the entire anchorage system. the standard outfit is as under: penetration cone, steel 60 angle 10sq.cm. Base area with friction jacketone mantle tube, nonumiform 36mm od at the two ends and reduced dia in between with souriding rod, working length 1m fifteen. load measuring head with automatic cut-off valve and oil can one set. pressure gauge 0-160kg/cm.sq.one pressure gauge 0-60kg/cm.sq one auger with bolt. flour auger driving handle flour t-rod one spanner one note: uniform diameter mantle tubes can be ordered at extra cost. optional extras: mantle tube 36mm uniform o.d. With sounding rod, working length 1mtr. spares & accessories: steel cone, 60 degree, 10 sq.cm. Base area. mantle tube 36mm uniform o.d. Working length 1 meter with sounding rod. mantle tube 36mm o.d. At the ends and reduced dia in between with sounding rod. working length 1 meter. pressure gauge 6 inch dia 0-10kg/cm.sq. In 0.1 kg/cm.sq. Divisions. sampler to go with the above equipment. friction jacket for friction ratio.

• Color: Metallic, Silver
• Surface Finshing: Polished
• Resistivity: Rust Resistant
• Material: Metal
• Application: Industrial
• Capacity: 50 Kn (5000 Kg)

The company is known as a prominent Manufacturer and Supplier of CBR Test Apparatus. The CBR Test Apparatus can be handy in the determination of the load carrying capacity in the laboratories. The CBR Test Apparatus comes into play in specific conditions where the in-place density and water content are such that the saturation degree is more than or equal to 80%. The material is without cohesion and is basically coarse grained as well.Components : Load frame (hand operated, motorized, single speed motorized, three speed motorized) capacity 50 KN (5000 kg) with high and low rate of travel of the lead screw Mold 150mm internal dia, 175 mm high Penetration piston, face dia 50 mm with adjustable bracket for dial gauge Circular metal spacer disc, 148 mm dia x 47.7 mm high with detachable handle Annular metal weight 2.5 kg, 147 mm dia with 53 mm dia hole Slotted metal weight 2.5 kg, 147 mm dia with 53 mm slot Perforated plate, 148 mm dia with adjustable stem and lock nut brass Metal tripod for dial gauge Cutting collar for obtaining sample from field Rammer 2.6 kg x 310 mm controlled drop through guide Rammer 4.89 kg x 450 mm controlled drop through guide Proving ring 5000 kg, equipped with dial gauge Strain dial gauge least count 0.01 mm x 25 mm travel

We manufacture superior quality Marshall Stability Test Apparatus for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous pouring mixture loaded on the lateral surface. Our Marshall Stability Test Apparatus is made of superior quality raw materials and equipment that make it highly useful in various sectors. The Apparatus is precision engineered to work with perfection. We custom manufacture Marshall Stability Test Apparatus as per the specifications of the clients. Working This is for use with hot mixture containing asphalt or tarAggregate up to 25 mm maximum size Attributes Accurate constructionCustom manufacturedEasy operational featuresOffer test results with perfection The equipment comprises of following Three specimens cylindrical mould 100 mm diametermeterThree base platesThree collars 100 mm diametermeterTwo compaction hammers, 10 lbs. Weight, with 45 cm dropOne specimen extractorOne compaction pedestal complete with specimen holderOne breaking head assembly. Complete with diameterl micrometer and bracket for flow measurementOne load transfer barOne loading unit, motorized, with travel of 50 mm/min and fitted with motor, reversing switch and limit switches to restrict the travel. Fitted with hand wheel for finer adjustment to bring the proving ring in contact with breaking head assembly, capable of application of loads up to 5000 kg. Suitable for operation from Main supply 230 volts, 50 cycles, single phase, A.C.Proving ring of 5000 kg (50 K.N.)Diameterl gauge .01 mm x 25 mm travel

We are engaged in designing Marshall Stability Test Apparatus since 8 years and have established our name among the leading Manufacturers, Suppliers and Exporters of Marshall Stability Test Apparatus from Delhi, India. Marshall Stability Test Apparatus is extensively used for measuring the resistance to plastic flow of cylindrical specimen of bituminous pouring mixture loaded on the lateral surface. Our offered apparatus is highly robust and is suitable for handling hot mixture containing tar or asphalt.   The Apparatus Consists of : A loading unit motorized capacity 50 KN with two telescopic pillars and an adjustable cross head. Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. The load frame has fixed speed of 50.8 mm per minute. Operated on 230 Volts A.C. Compaction pedestal with specimen mould holder- 1 No. Compaction Rammers, 4.5 kg weight and free fall 45.7 cm.- 2 Nos. Breaking head assembly with provision to fix flow meter.- 1 No Specimen mould 10.16cm ID x 7.6 cm high with base plate and extension collar- 3 Nos 6Kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting Plate- 1 No

Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled in to a thread of 3mm dia. Specification:- The complete set consists of one each : Glass plate 20cm x 15cm having round ends Brass or stainless steel rod 3mm dia x 150mm long Flexible spatula 15 cm Set of 6 moisture containers Porcelain basin 150mm dia  Plastic wash bottle 500ml Note:- Glass Plate size 500 x 500 x 10mm can be supplied at an extra cost.

Our team of quality examiners conducts stringent tests for ensuring the product quality.We team makes sure that all the trade transactions are made keeping all the details of the clients confidential.   Salient Features : High sensitivity compression proving ring cap of 200 kg Consolidation dia gauge 0.01 mm x 25 mm One strain dial gauge 0.01 mm x 25 mm One strain dia gauge 0.01mm x 25 mm Optional : Additional set of weights for normal stress of 5 kgcm2 Soil sampler for 60 mm x 60 mm specimen and test form pad of 50 Spares like porous stone for 60 mm x 60 mm size sample in pairs

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

• Brand Name: GLASSLABS

We offer Blood Roller Mixer. The”GlassLabs” Brand Blood Mixer which we provide is made up of high quality raw materials. It is shake-less and gentle mixing process that makes blood homogeneous. It is essential pre-process for perfect result of RBC, WBC and Platelets counting on Hematology Analyzer. It is a highly reliable product suitable for laboratories, blood banks, and biological institutions etc. Having high tensile strength and strong features, Our Blood Roller Mixer is highly in demand all over India and global markets as well. We are the well known Blood Mixer Manufacturers and Suppliers in India supplying and exporting to global markets and still raring to go places. Properties: • Body M.S. with Powder Coated. • Maximum R.P.M. 30 to 36 can be run on 230 ± 10% 50Hz-110v, 60Hz, AC • Mixing Time - 15 to 20 Minutes. • Four Nos. - Roller Size - Length 230mm. • Can be run with Six Nos. Loaded Vaccutainers (of 4ml) Or Bulb of 5ml x 15Nos.

• Frequency: 240 Volts
• Packaging Type: Wooden Box
• Usage/Application: Clean Room
• Brand Name: REW
• Material: Metal
• Finishing: Non Polished
• Shape: Rectangular
• Color: White
• Condition: New
• Application: Laboratory Use
• Size: 6ft
• Certification: ISO 9001:2008
• Type: Fume Hood
• Country of Origin: India
• Height: 5ft, 6ft
• Approx. Price: Platform Size

  TRACKING INDEX TEST APPARATUS TRACKING INDEX TEST APPARATUS As per IEC : 60112 The TRACKING INDEX APPARATUS from Sensors India was designed and manufactured to perform the test specified in the norm IEC 60112 (“Method for determining the comparative and the proof tracking index of solid insulating materials under moist conditions”) and many others standards ( ASTM D3638 – 12 , IS 2824 ) to determine compliance with safety requirements related to solid insulating materials under moist conditions. It is designed to determine the resistance to tracking in insulating parts supporting live parts used for electrical accessories such as MCBs, switches, sockets, plugs etc. Using this test apparatus “Proof Tracking Index Test” and “Comparative Tracking Index Test” can be conducted with test results complete logging in excel file. The inner body of the apparatus is made up of stainless steel & outer body is made up of mild steel. The reset switch is also available on the panel, where you can preset the desired no. of drops as per requirement. Tracking test indicates the relative resistance of solid insulating electric materials when submitted up to required test range. This method exposes the tested object to electric stress under water action with contaminant addition tracking may occur during test when voltage is activated on a defined disposition of electrodes on the material surface and electrolyte drops of salt solution are injected during a definite interval of time. The number of necessary drops to cause damage on the material increases with the reduction of the applied voltage. Under a critical value, tracking does not occur. Distinctive Attributes User Interface is very friendly Voltage as per standards required Current range with control Current and Voltage Digital Display Drop control and counting arrangement digital with Peristaltic Pump

Unconfined Compression Testing Apparatus can be used either in a Laboratory or in field. This apparatus is as per the design of Building Research Station, U.K.Consists of a spring operated load frame with arrangements for loading 38mm x 76mm samples, one set of four load springs of stiffness 0.2kg, o.4kg, 0.8kg and 1.6kgmm, a calibrated mask and one set of 50 charts, in a metal carrying case. Spares & Accessories: Charts set of 50 Calibrated mask. Spring set comprising one each of stiffness 2Nmm, 4Nmm, 8Nmm and 16Nmm Coning toll for 38mm sample (female) Coning toll for 38 mm sample (male) Tripod stand wooden, for using the instrument in field.

• Country of Origin: India
• Certification: CE Certified
• Weight: 100-500kg
• Color: Brown
• Voltage: 220V
• Driven Type: Electric
• Warrenty: 1year
• Type: Digital CBR Testing Machine
• Power: 3-5kw
• Brand Name: U Test
• Application: Industrial

The apparatus consist of a cast aluminum base with an iron stand on which moves an aluminum arm. A 6" dial is fixed on this arm and a brass chromium plated rod slide through the lower portion of the arm. A needle with weights is fitted to this rod. The dial is graduated from 0-400 in one tenth millimeter sub division. Supplied complete with adjustable needle holder, penetration needle sample container, transfer dish and weight of 50 gms.  Same as above but with automatic digital timer and electrical arrangement.

• Material: Stainless Steel
• Country of Origin: Made in India
• Brand Name: Unique
• Automation Grade: Manual
• Usage/Application: Testing
• Finishing: Powder Coated
• Dimension: 400 (L) x 136 (W) mm

Supplied with load yoke with direct and lever system for applying load. Normal stress capacity 8 kg/sq. cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre calibrated loading yoke. The loading unit is provided with V strips and roller strips for frictionless movement of shear box housing. Shear Box Assembly: Comprising direct shear box in two halves for a square specimen size 60 x 60 x 25mm one pair of plain gripper plates, One pair of perforated gripper plates, one pair of porous stones, one top of loading pad. Shear Box Housing: Accommodates the direct shear box assembly. Complete with two ball roller strips. Specimen cutter: for cutting 60 x 60 x 25 mm. Specimen form larger samples. Set of weights to give a normal stress of 3kg/sa.cm.    Essential Accessories: High sensitivity compression proving ring. Cap 200kg. One consolidation dial gauge 0.01mm x 25mm and one strain dial gauge 0.01mm x 25mm Optional Extras: Additional set of weights to give a normal stress of 5 kg/cm2. Soil sampler for 60mm x 60mm specimen and test forms pad of 50. Spares: Porous stone for 60mm x 60mm size sample available in pairs. Unit is electrically operated to give the following 12 rates or strains. 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01, 0.005, 0.002, 0.001, 0.004 and 0.0002 mm/min. The apparatus is suitable for operation on 230 Volts Single Phase A.C. Supply.

• Automation Grade: Manual
• Material: Aluminium
• Application: Soil Testing
• Color: Black
• Finishing: Powder Coating
• Weight: 1.800kg

Cone Penetrometer is used for finding the limit limit of soil whose plastic index is low. it is as per IS Standard. it is consist of frame with graduated scale at the front, the cone is fitted at the bottom of the rod which pass through the scale., one brass container of 50mm dia the whole unit is packed in cardboard box.

• temp.: 200°C ±0.5°C.

SIGMA Thermal Stability Test Apparatus is used to measure check Thermal stability of PVC insulation & sheath of Electric cables as per IS:5831. Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a PID controlled heating chamber at specified temp. of 200°C ±0.5°C.

We are the leading manufacturer, Supplier & Exporter of Manual Ring and Ball Apparatus. Ring and Ball Apparatus is used to determine softening point of bitumen. Ring and ball apparatus is used to determine softening point. It is that temperature at which a sample of bituminous material loaded by a 9.5mm dia steel ball drops at a distance of 25mm.

We manufacture Fume Hood that is available in different shapes and sizes. The Fume Hood, available with us, is aptly designed to release all the toxic vapors and hence protecting the instruments as well as people working in the lab. Salient Features : Robust constructionHigh capacityDimensional accuracyEasy to useCost effective Ideal for : Laboratories Specifications : Working Size :4' x 2' x 2'6' x 2' x 2'5' x3' x 2'

• Diameter: 1-1/2", 3", 5" and 6"

Our company brings to you range of highly reliable, accurate and sturdy testing sieves for grain and particle size analysis. These Testing Sieves are perfectly suitable for laboratory and industrial uses where high quality sieving analysis is required. These test sieves are available in various standard sizes and can be customized to meet special requirements. Sizes are printed on each sieve and separately packed in carton box. All these test sieves are designed and manufactured to meet BSS, ASTM and ISO standards.

• Used For: determining the slumps of fine aggregate in the determination of bulk and apparent specific gravity and absorptionof fine aggregate.
• Model: ASI-541
• Dimension: 1.5inch dia. at the top, 3.5 inch dia. at the base and 2.7/8 inch in height.

• Application: ETP, STP, R&D laboratory, Hotel Industry, Industrial Complexes, Water Research Industry
• Power: 220 v ac supply, 50 Hz, 100 W
• Temperature: 35 oC
• Features: Finds usage as Laboratory mixing and stirring equipment, Efficient and Economical handling of Flocculation matter, Correct estimation of dosing of alum and other coagulants
• Speed range: 2 to 250 RPM (Made available in variable speed control)
• Pre-set programs: 2
• Timer: Digital timer supports – 0 to 99 minutes
• Controls Keypad: Touch-sensitive
• Digital Display: LED, digital rpm indicator support
• Accuracy: +/-  2 RPM
• Size: Standard and Customized
• Body: Powder-coated body finish
• No. of Jar : 2, 4, 6

• Certification: CE Certified
• Color: Brown, Grey, Light White
• Voltage: 220V
• Driven Type: Electric
• Warranty: 1year, 2years, 3years
• Application: Soil Testing

• Features: Rugged construction, Easy to use, Compact design, High functionality, Longer functional life, Durable .
• Weight: 3.5kg
• Speed: 36 rpm
• Load Capacity: 9 tubes
• Motor Type: sryrinconised
• Brand Name: pacific

Laboratory CBR Test Apparatus, Laboratory Shrinkage Bar Mould, Proctor Mould

Liquid Limit Apparatus, automatic soil compactor