Soil Testing Equipment Dealers in Karampura, Delhi

Automatic Digital Bitumen Penetrometer-VSLIC4038 The Automatic Electronic Penetrometer is used for determination of the needle penetration according to EN 1426, ASTM D5 and AASHTO T49 standards. The penetration depth of the needle is determined with a pulse type electronic measuring system, which is separated from the plunger during the test, this allows the free guidance of the plunger which virtually eliminates friction during the test.Before each start of the test the measuring system automatically resets, and then the penetration needle moves down to the sample by using the electric drive, the needle position can be finely adjusted by using the joystick located on the front panel. A magnifying glass and an ultra- bright LED lamp are supplied to assist the operator; the plunger is then automatically released onto the sample and raised automatically after the testing period. The test result is displayed on the digital display. The plunger can easily be removed to calibrate its weight.A water bath and a thermometer (IP38, ASTM 17C or 63C) required for the test are ordered separately. The Automatic Electronic Penetrometer is supplied complete with;Penetration Needle, 1 pieceTransfer DishSample Cup, Ø 55×35 mm, 6 pieces, stainless steel Technical Specifications Measuring Range: 0-50 mm Resolution: 0.01 mm Test Load: 100 g (plunger 97.5 g + 2.5 g penetration needle) Test Time: 5 seconds (adjustable from 0.1 to 9999 sec.) Dimensions: 270x480x750 mm Weight (approx.): 24 kg Power: 75 W Automatic Digital Bitumen PenetrometerAutomatic Electronic Penetrometer is used for determination of the needle penetration according Before each start of the test the measuring system automatically resets, and then the penetration needle moves down to the sample by using the electric drive, Automatic Digital Bitumen Penetrometer Summary The Automatic Electronic Penetrometer is used for determination of the needle penetration according to EN 1426, ASTM D5 and AASHTO T49 standards. The penetration depth of the needle is determined with a pulse type electronic measuring system, which is separated from the plunger during the test, this allows the free guidance of the plunger which virtually eliminates friction during the test.

• Integral type proving Ring capacity: 3000Kgs
• A dial gauge: 0.01 x 25mm.

Originally developed by Bruce Marshall, a highway engineer in U.S.A later on standardized by ASTM. Generally the test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is measured when the same is loaded at periphery at 5cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmers for paving jobs. There are two major features of the Marshall method of designing mixes namely. a) densityvoids analysis, b) Stability-flow tests. The Marshall stability of mix is defined as a maximum load carried by a 0 compacted specimen at a standard test temperature of 60 C. The flow value is deformation the Marshall test specimen at under goes during the loading upto the maximum load, in 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity.

• Type: Lump Test Apparatus
• Certification: ISO 9001:2008
• Color: Grey
• Voltage: 110V, 220V, 380V
• Condition: New
• Power: 1KV, 2KV
• Warranty: 1yrs
• Temperature: 0-50°C
• Vacuum range: 150-300mm

We are the main supplier of this product.

• Brand Name: Vertex
• EDG host and connector: Waterproof connection, but it is best not to use it in rainy days
• Wet density range: According to the typical compacted soil dry density accuracy within 3% of the standard physical tes
• Moisture content range: According to the accuracy of typical compacted soil moisture content within 3% of the standard phys
• Maximum RS-232 cable length: 2500px
• Internal power supply: 12V nickel-hydrogen, 2000mAh capacity
• Battery life: About 24 hours
• Operating temperature range: 0 to 50 Degree C
• Humidity range: 5% to 90%
• EDG controller weight: 8kg
• EDG controller size: 300*260*140mm
• EDG accessory weight: About 3kg
• Model Name/Number: VS-4114

• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

The Liquid Limit Device correlates the mechanical properties of the soil such as compressibility and low shear strength. Being a major Manufacturer and Supplier of Liquid Limit Device, we offer a device that has a brass cup on adjustable brackets with a fall adjustment of 1 cm. The brass cup of the Liquid Limit Device can be raised and dropped through cam action on a rubber base that has standard hardness. Having one Casegrande grooving tool as well as one ASTM grooving tool along with a high gauge block (type a of is 9259), the Liquid Limit Device is a complete setup of its own.

The permeability of the soil is one of the important aspects to be studied and that can be done through the soil permeability apparatus. As a manufacturer and supplier of soil permeability apparatus, we solve a lot of issues. The results of the permeability checks through the soil permeability apparatus help in the groundwater pumping, excavations in foundation sites and dam designing. The soil permeability apparatus can check the pre-formed as well as re-molded samples as well as the undisturbed samples through constantfalling head methods. The permeability studies can provide inputs on saturated compressible soil layer, equifer flow rate, as well as flow of water through interconnected voids. consists of gunmetal mould 100mm dia x 127.3mm height x 1000ml volume, with collar of 100mm dia x 60mm high and drainage base plate, drainage cap, metallic clamping ring, two porous stone for base and cap, dummy plate, air release valve. With a set of three glass stand pipes approx.6mm, 10mm, and 20mm dia x 1 meter length mounted on a wooden board, the end of the glass tube is serrated to connect rubber tube of 3 meter length with pinch cock.

We manufacture superior quality Marshall Stability Test Apparatus for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous pouring mixture loaded on the lateral surface. Our Marshall Stability Test Apparatus is made of superior quality raw materials and equipment that make it highly useful in various sectors. The Apparatus is precision engineered to work with perfection. We custom manufacture Marshall Stability Test Apparatus as per the specifications of the clients. Working This is for use with hot mixture containing asphalt or tarAggregate up to 25 mm maximum size Attributes Accurate constructionCustom manufacturedEasy operational featuresOffer test results with perfection The equipment comprises of following Three specimens cylindrical mould 100 mm diametermeterThree base platesThree collars 100 mm diametermeterTwo compaction hammers, 10 lbs. Weight, with 45 cm dropOne specimen extractorOne compaction pedestal complete with specimen holderOne breaking head assembly. Complete with diameterl micrometer and bracket for flow measurementOne load transfer barOne loading unit, motorized, with travel of 50 mm/min and fitted with motor, reversing switch and limit switches to restrict the travel. Fitted with hand wheel for finer adjustment to bring the proving ring in contact with breaking head assembly, capable of application of loads up to 5000 kg. Suitable for operation from Main supply 230 volts, 50 cycles, single phase, A.C.Proving ring of 5000 kg (50 K.N.)Diameterl gauge .01 mm x 25 mm travel

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

• Frequency: 240 Volts
• Packaging Type: Wooden Box
• Application: Clean Room
• Brand Name: REW
• Material: Metal
• Finishing: Non Polished
• Shape: Rectangular
• Color: White
• Condition: New
• Application: Laboratory Use
• Size: 6ft
• Certification: ISO 9001:2008
• Type: Fume Hood
• Country of Origin: India
• Height: 5ft, 6ft
• Approx. Price: Platform Size

• Material: Mild Steel
• Weight: 5 Kg
• Brand Name: Unique
• Country of Origin: Made in India
• Usage/Application: Soil Testing
• Finishing: Powder Coated
• Automation Grade: Manual
•  :  

Bituminous surfaces exposed to varying temperature conditions undergo expansion & contraction. So an important characteristic of the binder is its ductility & the degree of ductility has an effect on the cracking bituminous surface due to traffic stress.The ductility of bitumen is expressed as the distance in centimeters to which a standard briquette can be elongated before the thread thus formed breaks under specified conditions.

• Brand Name: GLASSLABS

We offer Blood Roller Mixer. The”GlassLabs” Brand Blood Mixer which we provide is made up of high quality raw materials. It is shake-less and gentle mixing process that makes blood homogeneous. It is essential pre-process for perfect result of RBC, WBC and Platelets counting on Hematology Analyzer. It is a highly reliable product suitable for laboratories, blood banks, and biological institutions etc. Having high tensile strength and strong features, Our Blood Roller Mixer is highly in demand all over India and global markets as well. We are the well known Blood Mixer Manufacturers and Suppliers in India supplying and exporting to global markets and still raring to go places. Properties: • Body M.S. with Powder Coated. • Maximum R.P.M. 30 to 36 can be run on 230 ± 10% 50Hz-110v, 60Hz, AC • Mixing Time - 15 to 20 Minutes. • Four Nos. - Roller Size - Length 230mm. • Can be run with Six Nos. Loaded Vaccutainers (of 4ml) Or Bulb of 5ml x 15Nos.

• Brand Name: Sand Absorption Cone

We are offering sand absorption cone. sand absorption cone and tamper:- used for determination the slump of fine aggregate in the determination of bulk and apparent specific gravity and absorption of fine aggregate. specifications: the equipment comprises of a conical metal mould 1.5 inch dia at the top, 3.5 inch dia at the abse and 2.7/8 inch in height. A metal tamping rod weighing 12 ounces and having a flat circular tamping face 1 inch in diameter.

We are offering cone penetrometer for soil testing. It consist of unit with one meter scale fit on it , spare rod, cone & weight about 8kg . The instrument are nicely pack in wooden box. for more detail , please send your valued enquiry.

The apparatus is designed to measure the smoke density from the burning or decomposition of plastics as per the requirement of the ASTM D 2843 standard. The apparatus consists of smoke chamber and control console. The white background will permit observations of the flame, smoke and burning characteristics of the material. The viewing of the exit sign help to correlate the visibility and measured values. The specimen is supported on a 64 m.m. base and is equidistant from all sides of the chamber. The screen will lie on a stainless steel bezel supported by a rod through the right side of the chamber. From the same rod a similar bezel located. This rod supports a square of asbestos paper which cactus any material that drip from the specimen during the test. By rotation of the specimen holder rod, the burning specimen is quenched in a shallow pan of water positioned below the specimen holder. At the above location and out side the chamber tubular boxes containing the light source with necessary lens and mirror on one side and a special photocell with a set of baffles to prevent stray light, on the other side are provided. The light source is fitted inside the tubular box on the left hand side of the chamber. The source consists of a lamp with a regulated power supply fitted with a reflector mirror, and a converging lens. The reflector lens arrangements make the light beam on the photocell housed in the right hand side box. The percentage of light absorbed will be displayed through a linear amplifier digital electronic photometer with 0% to 100% absorbency scale with auto calibration system.

Our company is reckoned as one of the prime Manufacturers, Exporters and Suppliers of Jar Test Apparatus from India. Precisely manufactured, our Jar Test Apparatus allows efficient and economical flocculation matter and collides in general. It is ideal for use in water treatments to correctly estimate the dosing of alum and such other coagulants for treatment of Water sewage and floc formation test in Water Treatment plants. Our Jar Test Apparatus is well equipped with D.C. motor and runs on 220 V AC power supply. It can function on speed range from 20 to 100 RPM approx. Capacity of flasks : 1 Ltr / 2 LtrsFor 2 StirrersFor 4 StirrersFor 6 StirrersFor 8 stirrers

• Diameter: 1-1/2", 3", 5" and 6"

Our company brings to you range of highly reliable, accurate and sturdy testing sieves for grain and particle size analysis. These Testing Sieves are perfectly suitable for laboratory and industrial uses where high quality sieving analysis is required. These test sieves are available in various standard sizes and can be customized to meet special requirements. Sizes are printed on each sieve and separately packed in carton box. All these test sieves are designed and manufactured to meet BSS, ASTM and ISO standards.

• temp.: 200°C ±0.5°C.

SIGMA Thermal Stability Test Apparatus is used to measure check Thermal stability of PVC insulation & sheath of Electric cables as per IS:5831. Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a PID controlled heating chamber at specified temp. of 200°C ±0.5°C.

We are offering fume hood. Labsol laboratory fume hood is a ventilated enclosure designed to contain and exhaust fumes, vapors, mists and particulate matter generated within the hood interior. Fume hood structures are basically boxlike, with an open side (or sides) for access to the interior of the hood. A transparent, movable panel, called a sash, allows the user to restrict or enlarge the hood opening. The hood is connected, via ductwork, to an exhaust fan, usually located on the roof of the building in which the hood is located. The exhaust fan draws air from the room in which the hood is in through the hood opening and out through the ductwork. The speed of the air moving through the hood opening is known as face velocity. labsol fume hood is fabricated from special grade pre coated mild steel sheet duly powder coated from outside and epoxy painted from inside. The inner walls of the working chamber is covered with epoxy coated asbestos or frp or hdpe lining or as required which duly provides better protection from acid fumes in the lab. labsol fume hoods are aerodynamically designed considering most efficient airflow to the suction. Double wall feature provides easy access to utilities like water, gas, vacuum & electricity. Detachable base storage cabinets are provided with castors for easy maintenance, sigma offers variety of lining & work surfaces like granite, ceramic, s.s., p. P. & frp. Sash is provided with 6 mm toughened glass & counter balance is provided to achieve easy movement. High performance centrifugal blower is provided with different ducting materials like pppvchdpe etc. Baffle removable plates incorporated into the rear or top of the work chamber to form a plenum between the work chamber and the exhaust duct connection to promote uniform scavenging of fume and the point of discharge. Exhaust system all exhaust air ductwork, fan and associated equipment installed between the point of connection to the fume hood and the point of discharge.

• Automation Grade: Manual
• Material: Aluminium
• Application: Soil Testing
• Color: Black
• Finishing: Powder Coating
• Weight: 1.800kg

Cone Penetrometer is used for finding the limit limit of soil whose plastic index is low. it is as per IS Standard. it is consist of frame with graduated scale at the front, the cone is fitted at the bottom of the rod which pass through the scale., one brass container of 50mm dia the whole unit is packed in cardboard box.

CBR Test Apparatus Field Type, Material Testing Equipments

automated test equipment, Electric Panel

Ductility Testing Apparatus, Accelerated Curing Tank, curing tanks

Consolidation Apparatus, Scientific Instruments, vane shear test equipment

Halogen Acid Gas Test Apparatus, toxicity test apparatus

California Bearing Ratio Apparatus, Digital Humidity Indicators / Controllers

Thermal Stability Test Apparatus, Sigma Digital Earth Resistance Tester

SPIC Hot Deformation Test apparatus, ABT Meter

soil testing equipments