Soil Testing Equipment Dealers in Patel Nagar, Delhi

Endurance Test For Thermostat equipment specially designed to test life cycle of thermostat as per Indian and International standards.Used for Storage Water Heater (Geysers), Refrigerators and general purpose Thermostats The device consists of Digital voltmeter, Digital Amp. Meter Load as per requirement Temperature controller and safety devices.The thermostat is heated & cooled by TEC (Gas free) based system without the use of Compressor and Gas .The system is programmable to conduct maximum 30 cycles per hour and is also protected against the failure of thermostat.A unique Programmable Logic Controller is specially designed for presetting number of cycles, automated conditioning of Thermostat, Logging, Drain and various modes of operations pumps and solenoids control. There are also override controllers for conditioning bath temperature control. With latest technology up-gradation we have also developed this device with fully programmable logically controlled.

• temp.: 200°C ±0.5°C.

SIGMA Thermal Stability Test Apparatus is used to measure check Thermal stability of PVC insulation & sheath of Electric cables as per IS:5831. Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a PID controlled heating chamber at specified temp. of 200°C ±0.5°C.

• Industry: Agriculture
• Packing Type: Bag
• Soil Elements: Nitrogen, potash, phosphorus, ph
• Type: Compact & Portable
• Tests for: Primary And Secondary Nutrients
• Testing Kit: Agriculture Soil Testing Kit

Lightweight and portable, this Soil Test Direct Soil EC Tester directly measures soil conductivity and temperature. Our Soil Test Direct Soil EC Tester has a penetration probe that features a built-in temperature sensor, allowing for measurements that are automatically temperature compensated. The conductivity range can be calibrated at one point, and tester calibration is done in a standardized solution. We offer 4.5 penetration conductivity probe, calibration screwdriver, batteries, and instruction manual along with this Soil Test Direct Soil EC Tester.

Product Code: EKE 895This test is performed to measure the short-term strength of an installed Rockbolt under field conditions. The strength is measured by a pull test in which bolt head displacement is measured as a function of applied bolt load to give a load- displacement curve. This test is usually employed to assess the performance of the Rockbolt anchor resulting out of the quality of material used for manufacture of Rockbolt and installation method used. The test equipment consists of a manually operated hydraulic pump connected to hydraulic jack, having a high strength test rod, coupled to the Rockbolt under test. The anchor is tested by measuring the load until a total displacement greater than 40 mm has been recorded or until the bolt yield or fractures, if this occurs first. The readings of displacement are taken in increments of approx. 5 kN load or 5 mm displacement whichever occurs first. The rate of load application should be in the range 5- 1 0 kN/min. Readings are only taken after both load and displacement have stabilised. The time required for stabilisation should be recordedDetails Pullout Test Apparatus 500 kN (50 Tonnes) Consists of following: EKE 89001 Hydraulic Centre Hole Jack 500 kN (50 Tonnes) capacity with 54 mm Centre Hole, 150 mm Ram Travel, Double Acting EKE 89005 Hand Operated, two Stage Pump EKE 89007 Thermoplastic Hose, 6m long. with pair of quick couplings EKE 89010 Load Gauge 150 mm dia, 500 kN x 5 kN EKE 89011 Reaction Frame 500 kN capacity with 90mm hole at base EKE 89012 High Strength Test Rod, 40 mm dia EKE 89015 High Strength Coupling, having RH thread to suit Test Rod on one end and LH thread to suit 20mm dia Rockbolt on the other end EKE 89016 High Strength Coupling, having RH thread to suit Test Rod on one end and LH thread to suit 25mm dia Rockbolt on the other end EKE 89017 High Strength Coupling, having RH thread to suit Test Rod on one end and LH thread to suit 30mm dia Rockbolt on the other end EKE 89018 High Strength Coupling, having RH thread to suit Test Rod on one end and LH thread to suit 32mm dia Rockbolt on the other end EKE 072- Dial Gauge, 0.01 x 25 mm

• Brand Name: AMK

This unit consists of a cabinet which houses the gear system and motor mounted on a sturdy angle iron base. The loading is done through the bottom loading plate which is carried on a lead screw. The advancement of this lead screw is secured against rotating by a sliding key. The top bracket is adjustable in height and carries a hexagonal adaptor for taking standard proving rings. The instrument is fitted with a motor operation on 220230 volts, single phase, 50 cycles A.C. supply.This is for evaluating the strength of soil on field exploration or construction site and in the preliminary laboratory studies.It gives directly the unconfined strength.

Soil Permeability Apparatus come with glass tubes of 75mm, bore tube is provided with over flow arrangement for constant head tests. The remaining tubes are used for falling head test.

Unconfined Compression Testing Apparatus can be used either in a Laboratory or in field. This apparatus is as per the design of Building Research Station, U.K.Consists of a spring operated load frame with arrangements for loading 38mm x 76mm samples, one set of four load springs of stiffness 0.2kg, o.4kg, 0.8kg and 1.6kgmm, a calibrated mask and one set of 50 charts, in a metal carrying case. Spares & Accessories: Charts set of 50 Calibrated mask. Spring set comprising one each of stiffness 2Nmm, 4Nmm, 8Nmm and 16Nmm Coning toll for 38mm sample (female) Coning toll for 38 mm sample (male) Tripod stand wooden, for using the instrument in field.

Located in Delhi, India, we are counted amongst the prominent Manufacturers, Exporters and Suppliers of Direct Shear Apparatus. Intricately designed using high-quality raw material under the guidance of our experts, the Direct Shear Apparatus we make available are high in demand in the international market. They functional smoothly and have robust construction and high durability. For price quotes, stay assured to get what’s the best in market. Highlights : The apparatus consists of : - EKE 10401 Shear Box Assembly Comprises of Type of Shear : Direct/Residual measurement Operation : Motorised Rates of Strain : 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, (mm/min) 0.01, 0.005, 0.002, 0.001, 0.0004, 0.0002 Specimen Size : 60 x 60 x 25mm Power Specifications : 220 V, 50 Hz, Single Phase, AC supply

Bituminous surfaces exposed to varying temperature conditions undergo expansion & contraction. So an important characteristic of the binder is its ductility & the degree of ductility has an effect on the cracking bituminous surface due to traffic stress.The ductility of bitumen is expressed as the distance in centimeters to which a standard briquette can be elongated before the thread thus formed breaks under specified conditions.

We manufacture, export and supply Consolidation Apparatus. The Consolidation Apparatus is known for executing unidemnsional test, which are of utmost importance to determine the actual soil mechanics. The company is known for achieving excellence through its engineering by preparing Consolidation Apparatus. Specifications Loading unit, maximum capacity 20kgcm.sq. Having a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:1 the whole assembly being mounted on a sturdy steel frame stand. The loading unit is so designed that it can be used for consolidation cells of different diameters as well as different dia floating ring type consolidation cells. Fixed ring type Consolidometer (Odeometer) cell assembly for testing 60mm dia x 20mm thick specimen comprising: Fixed ring for specimens 60mm dia x 20mm thick with guide ring. Top and bottom porous stones for 60mm dia specimen. Perforated pressure pad, Channeled base with water inlet and gasket Flanged water jacket, water reservoir with plastic tube and pinch cock. Set of weights to give a pressure of 10kgcm.sq. On 60mm dia specimen, comprising : 7 nos. 0.05 kgcm .sq., 5nos. 0.1 kgsq.cm., 6nos. 0.5kgsq. cm., and 5 nos. 1.0 kgsq.cm. Supplied complete as above but without dial gauge. Features Strict quality guidelines are followed while manufacturing, exporting and supplying of Consolidation ApparatusIt comes with an additional accessory of dial gauge 0.002 mm x 10mmConsolidation Apparatus comes with an extension piece, 40 mm longPackaging of the machinery is executed with great care and importance

We are offering vikerberg penetrometer. Viberberg penetrometer is used for determining the bearing capacity of soil. it consist of proving ring with extension rod & cone at its tip. For more detail , send your email .

Product Code: EKE 108 Standrad: Standard IS:2720 (Part 30)   EKE 10801 Container 1 No.EKE 10802 Set of 4 Springs, each of capacity 2 kg-cm,4 kg-cm, 6 kg-cm and 8 kg-cm 1 No.Optional ExtraEKE 10803 Stand, for use at the site 1 No. Consists of a torque head, adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of an electric motor which operates a worm gear arrangement turning the upper end of a calibrated torsion spring. The vane shaft is attached through the hollow upper shaft to a resettable pointer which indicates the angle of torque on a dial graduated in degrees. The dial reading multiplied by spring factor gives the torque.

Shrinkage limit is the maximum water content at which a reduction in water content does not cause an appreciable reduction in volume of the Soil Mass. At shrinkage limit, on further reduction in water, air enters in to the voids of soils and thus keeps the volume constant. The apparatus can be used to determine shrinkage limit and to calculate other shrinkage ratio, shrinkage index and volumetric shrinkage Set consists of one each: Porcelain evaporating dishShrinkage dishGlass cupPerspex plate with three metal prongsFlexible spatula 100mmGlass cylinder25ml x 1ml, supplied without mercuryPlastic wash bottle 500ml   Optional Accessories: Mercury supplied in bottle of 500 gms. at an extra cost.

• Brand Name: Vertex
• EDG host and connector: Waterproof connection, but it is best not to use it in rainy days
• Wet density range: According to the typical compacted soil dry density accuracy within 3% of the standard physical tes
• Moisture content range: According to the accuracy of typical compacted soil moisture content within 3% of the standard phys
• Maximum RS-232 cable length: 2500px
• Internal power supply: 12V nickel-hydrogen, 2000mAh capacity
• Battery life: About 24 hours
• Operating temperature range: 0 to 50 Degree C
• Humidity range: 5% to 90%
• EDG controller weight: 8kg
• EDG controller size: 300*260*140mm
• EDG accessory weight: About 3kg
• Model Name/Number: VS-4114

A prominent supplier of huge range of Direct Shear Apparatus.

Used to determine the flakiness index of the aggregate. The aggregate particles are to be considered flaky, if their thickness is less than 0.6 of their nominal size.  It consists of a frame with sliding panel with accurate slots of different standard width and length, the complete assembly is chrome plated or powder coated.

We manufacturer, Suppliers & Exporter of Lateral Pressure Assembly. It is designed for application of cell pressures up to 10 kg/cm2 on a triaxial specimen in the triaxial cell. This unit is mostly used in routine which last for about 10 to 15 minutes wherein the variations of cell pressure can be tolerated. We also designed Lateral Pressure Assembly as per the designed 

We are offering standard penetrometer. Used to determine grade of bitumen. The penetration tests determine consistency of bitumen for the purpose of grading. Depth in units 1/10 of millimeter to which a standard needle having a standard weight will penetrate vertically in a duration of five seconds at a temperature of 25 deg c determines penetration for gradation. specification: it consists of a vertical pillar mounted on abase provided with levelling screws. The head, together wtih dial plunger rod and cone (or needle) slides on a pillar and can be clamped at any desired height. A rack and pinion and pointer assemble provides fine adjustment of needle or cone tip to sample. It incorporates a clutch mechanism which makes reading of penetrationand subsequent resetting a simple and accurate operation. The dial is graduated in 400 1/10 and the millimeter subdivisions and the needle pointer against figures makes easy reading. Supplied with a bitumen penetration needle, ring weight one each 50 gms, and two sample containers.

Backed by a team of expert professional associates, who are having years of experience in the domain, we are rendering salt spray chamber or corrosion test apparatus. The offered product-line finds it used in different industrial applications and are widely acclaimed for its reliability and durability. Apart from this, the offered range is offered at the most market-leading price. features: digital indicators cum controller/indicator digital timer (999 hours) humidity meter with sensor mist dispersion automizer drainage system heating system hanging provision/rack provision air regulator air filter fog collection unit

• Used: for the determination of the consistency of freshly mixed concrete .
• graduated Steel Rod: 16mm dia. x 600mm long
• Height: 30cm
• Internal Dia. Base: 20cm

• Features: Flawless finish, Affordable prices, Specifically designed .

• Country of Origin: India
• Certification: CE Certified
• Weight: 100-500kg
• Color: Brown
• Voltage: 220V
• Driven Type: Electric
• Warrenty: 1year
• Type: Digital CBR Testing Machine
• Power: 3-5kw
• Brand Name: U Test
• Application: Industrial

We are leading supplier of huge range of Salt Spray Test Apparatus.

California Bearing Ratio Apparatus, Digital Humidity Indicators / Controllers

Thermal Stability Test Apparatus, Sigma Digital Earth Resistance Tester

industrial electric ovens, Ultrasonic Bath, hplc column oven, Bod Monitor