Soil Testing Equipment Dealers in Sarai Rohilla, Delhi

Same as standard penetrometer but the unit is compact with timer to control duration of penetration. The instrument is provided with lead screw gear arrangement, Leveling screws, Spirit level and a digital preset timer

• Country of Origin: Made in India
• Brand Name: Steco
• Application: Industrial
• Portable: Yes
• Load Cell Capacity: 120 KN
• Body Material: Cast Iron

Owing to our rich industry experience and knowledge in this domain, we have become an eminent Double Ring Soil Infiltrometer manufacturer, supplier and exporter. This laboratory instrument is widely used to determine the infiltration rate of water into the soil and the rate is determinate as the amount of water per surface area and time unit that penetrates the soils. Our well equipped infrastructure unit helps us to ensure prompt and hassle-free production of this Double Ring Soil Infiltrometer.

We are engaged in designing Marshall Stability Test Apparatus since 8 years and have established our name among the leading Manufacturers, Suppliers and Exporters of Marshall Stability Test Apparatus from Delhi, India. Marshall Stability Test Apparatus is extensively used for measuring the resistance to plastic flow of cylindrical specimen of bituminous pouring mixture loaded on the lateral surface. Our offered apparatus is highly robust and is suitable for handling hot mixture containing tar or asphalt.   The Apparatus Consists of : A loading unit motorized capacity 50 KN with two telescopic pillars and an adjustable cross head. Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. The load frame has fixed speed of 50.8 mm per minute. Operated on 230 Volts A.C. Compaction pedestal with specimen mould holder- 1 No. Compaction Rammers, 4.5 kg weight and free fall 45.7 cm.- 2 Nos. Breaking head assembly with provision to fix flow meter.- 1 No Specimen mould 10.16cm ID x 7.6 cm high with base plate and extension collar- 3 Nos 6Kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting Plate- 1 No

The apparatus is designed to measure the smoke density from the burning or decomposition of plastics as per the requirement of the ASTM D 2843 standard. The apparatus consists of smoke chamber and control console. The white background will permit observations of the flame, smoke and burning characteristics of the material. The viewing of the exit sign help to correlate the visibility and measured values. The specimen is supported on a 64 m.m. base and is equidistant from all sides of the chamber. The screen will lie on a stainless steel bezel supported by a rod through the right side of the chamber. From the same rod a similar bezel located. This rod supports a square of asbestos paper which cactus any material that drip from the specimen during the test. By rotation of the specimen holder rod, the burning specimen is quenched in a shallow pan of water positioned below the specimen holder. At the above location and out side the chamber tubular boxes containing the light source with necessary lens and mirror on one side and a special photocell with a set of baffles to prevent stray light, on the other side are provided. The light source is fitted inside the tubular box on the left hand side of the chamber. The source consists of a lamp with a regulated power supply fitted with a reflector mirror, and a converging lens. The reflector lens arrangements make the light beam on the photocell housed in the right hand side box. The percentage of light absorbed will be displayed through a linear amplifier digital electronic photometer with 0% to 100% absorbency scale with auto calibration system.

• size: 60 mm x 60 mm x 25 mm.

The unit confirms to IS2720. It has a hand operated horizontal loading system for shearing the specimen. Hangers are provided for creating normal stress. Shear box assembly, 60 mm square, complete with a U-bracket, guide pins and spacing screws, made of brass. Gripper assembly consisting of two plain grid plates, two perforated grid plates, one base plate and one loading pad, all made of brass. Two porous stones, each 6 mm thick, fitting the shear box. Shear box housing of brass, complete with two ball roller strips. Loading unit with normal loading of 8kgcm2 on 60 mm square specimen.

We manufacturer, Suppliers & Exporter of Lateral Pressure Assembly. It is designed for application of cell pressures up to 10 kg/cm2 on a triaxial specimen in the triaxial cell. This unit is mostly used in routine which last for about 10 to 15 minutes wherein the variations of cell pressure can be tolerated. We also designed Lateral Pressure Assembly as per the designed 

Our company is a well-known Manufacturer, Exporter and Supplier of the Mortar Penetrometer. The Mortar Penetrometer manufactured by our company is known for its wide variety of attractive features and applications. Some of the features of the Mortar Penetrometer are as follows: Refernce Standard - ASTM : C 403 It is used for finding out the rate of hardening of mortar sieved from concrete spring and a stem graduated from 0-70 kg x 1 kg. Six interchangeable penetration needles of areas 645, 323, 65 32 and 16mm sq. is provided . The penetration resistance is measured by the force exerted to penetrate the mortar by 25mm and is indicated by a sliding ring on the stem, which is graduated. Needle shanks are marked at every 12.5mm. Note : Complete in a wooden carrying case.

• Weight: Approx 5kg
• Material: Mild Steel
• Product Type: Point Apparatus
• Power Source: Electricity
• Height: Approx 2fts

Used to determine the flakiness index of the aggregate. The aggregate particles are to be considered flaky, if their thickness is less than 0.6 of their nominal size.  It consists of a frame with sliding panel with accurate slots of different standard width and length, the complete assembly is chrome plated or powder coated.

• Material: Steel, Granite
• Size: 38 mm
• Resolution: 0.001 mm

Unique design of ventilation keeps the surface of the instruments from being Burnt even when the instruments i.e. Oven Temperature maintained at 200°C, Kanthal A-1 Super quality coil shaped & Air heater tubular model wound on sideon the back of the Oven for better accuracy, Toughened Glass view window to observe Test the material without disturbing the Temperature condition of the chamber.

Obromax fume hood are to limit a person's exposure to hazardous andor unpleasant fumes. For worker protection, the laboratory fume hood is the most useful piece of safety equipment found in the lab. When used appropriately, fume hoods not only provide protection from toxic gases and vapors but also provide protection from unanticipated fires and explosions. Fabricated out of thick wooden board these are designed . Outer is finished with sunmica and inner epoxy painted. Working table top is fitted with acidalkali resistant tiles stainless steel and a small wash basin with connections provided for inlet and out let of water. The front door moves vertically up and down with concealed counter balanced weight. The unit if fitted with flourescent light and a gas cock for gasair supply. The space under the work station can be provided with storage compartments for storage purpose. The front facing panel is fitted with 155 amp socket with switches for exhaust system and fluorescent light. To work on 220230 volts a.c. Supply. Working size- 2’x2’x2’ 3’x2’x2’ 4’x2’x2’ 6’x2’x2’

• Country of Origin: India
• Certification: CE Certified
• Weight: 100-500kg
• Color: Brown
• Voltage: 220V
• Driven Type: Electric
• Warrenty: 1year
• Type: Digital CBR Testing Machine
• Power: 3-5kw
• Brand Name: U Test
• Application: Industrial

• Type: Soil Testing Equipment
• Certification: ISO 9001:2008
• Weight: 10-50kg
• Voltage: 110V, 220V, 380V
• Application: Paper Testing
• Power: 3-6kw, 6-9kw
• Driven Type: Electric
• Warranty: 1year

We are the main supplier of this product.

• temp.: 200°C ±0.5°C.

SIGMA Thermal Stability Test Apparatus is used to measure check Thermal stability of PVC insulation & sheath of Electric cables as per IS:5831. Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a PID controlled heating chamber at specified temp. of 200°C ±0.5°C.

• Features: Rugged construction, Easy to use, Compact design, High functionality, Longer functional life, Durable .
• Weight: 3.5kg
• Speed: 36 rpm
• Load Capacity: 9 tubes
• Motor Type: sryrinconised
• Brand Name: pacific

Backed by a team of expert professional associates, who are having years of experience in the domain, we are rendering salt spray chamber or corrosion test apparatus. The offered product-line finds it used in different industrial applications and are widely acclaimed for its reliability and durability. Apart from this, the offered range is offered at the most market-leading price. features: digital indicators cum controller/indicator digital timer (999 hours) humidity meter with sensor mist dispersion automizer drainage system heating system hanging provision/rack provision air regulator air filter fog collection unit

Split Tube Sampler or Split Spoon Sampler is designed to take undisturbed soil samples using the drive weight method as per BS 1377. The split tube section is held together with a ball check valve head and a heat treated drive shoe.

industrial electric ovens, Ultrasonic Bath, hplc column oven, Bod Monitor

Soil Testing Equipment, Box Strapping Machine, Grain Moisture Meter

California Bearing Ratio Apparatus, Digital Humidity Indicators / Controllers

soil testing equipments, compressor testing machine

Thermal Stability Test Apparatus, Sigma Digital Earth Resistance Tester

Two Hinged Arch Apparatus, Pocket Weather Meter, Tilting Level

Soil Testing Equipment, Concrete Testing Equipment, Cement Testing Equipment