Soil Testing Equipment Dealers in Tri Nagar, Delhi

The moisture level wherein the soil has the smallest plasticity levels is known as limit, and plastic limit is basically the water content where soil crumbles on being rolled in to a 3 mm dia thread. As a Manufacturer and Supplier of Plastic Limit Set, we offer a complete set for the study of the plastic limit. The dimensional accuracy of the components makes the Plastic Limit Set effective and efficient in its work. Components : Glass plate 20 cm x 15 cm having ground ends and one side frosted Brass or stainless steel rod 3 mm dia x 150 mm long Flexible spatula Set of 6 moisture containers Porcelain basin 150 mm dia Plastic wash bottle 500ml

• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant
• Size: 100mm Dia X 127.3mm Height X 1000ml Volume

The permeability of the soil is one of the important aspects to be studied and that can be done through the Soil Permeability Apparatus. As a Manufacturer and Supplier of Soil Permeability Apparatus, we solve a lot of issues. The results of the permeability checks through the Soil Permeability Apparatus help in the groundwater pumping, excavations in foundation sites and dam designing. The Soil Permeability Apparatus can check the pre-formed as well as re-molded samples as well as the undisturbed samples through constant/falling head methods. The permeability studies can provide inputs on saturated compressible soil layer, equifer flow rate, as well as flow of water through interconnected voids.   Consists of gunmetal mould 100mm dia X 127.3mm height X 1000ml volume, with collar of 100mm dia X 60mm high and drainage base plate, Drainage cap, Metallic clamping ring, two porous stone for base and cap, Dummy plate, air release valve. With a set of three glass stand pipes approx.6mm, 10mm, and 20mm dia X 1 meter length mounted on a wooden board, the end of the glass tube is serrated to connect rubber tube of 3 meter length with pinch cock.

• Brand Name: GLASSLABS

We offer Blood Roller Mixer. The”GlassLabs” Brand Blood Mixer which we provide is made up of high quality raw materials. It is shake-less and gentle mixing process that makes blood homogeneous. It is essential pre-process for perfect result of RBC, WBC and Platelets counting on Hematology Analyzer. It is a highly reliable product suitable for laboratories, blood banks, and biological institutions etc. Having high tensile strength and strong features, Our Blood Roller Mixer is highly in demand all over India and global markets as well. We are the well known Blood Mixer Manufacturers and Suppliers in India supplying and exporting to global markets and still raring to go places. Properties: • Body M.S. with Powder Coated. • Maximum R.P.M. 30 to 36 can be run on 230 ± 10% 50Hz-110v, 60Hz, AC • Mixing Time - 15 to 20 Minutes. • Four Nos. - Roller Size - Length 230mm. • Can be run with Six Nos. Loaded Vaccutainers (of 4ml) Or Bulb of 5ml x 15Nos.

• Frequency: 240 Volts
• Packaging Type: Wooden Box
• Usage/Application: Clean Room
• Brand Name: REW
• Material: Metal
• Finishing: Non Polished
• Shape: Rectangular
• Color: White
• Condition: New
• Application: Laboratory Use
• Size: 6ft
• Certification: ISO 9001:2008
• Type: Fume Hood
• Country of Origin: India
• Height: 5ft, 6ft
• Approx. Price: Platform Size

• Material: Stainless Steel
• Country of Origin: Made in India
• Brand Name: Unique
• Automation Grade: Manual
• Usage/Application: Testing
• Finishing: Powder Coated
• Dimension: 400 (L) x 136 (W) mm

We manufacture superior quality Marshall Stability Test Apparatus for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous pouring mixture loaded on the lateral surface. Our Marshall Stability Test Apparatus is made of superior quality raw materials and equipment that make it highly useful in various sectors. The Apparatus is precision engineered to work with perfection. We custom manufacture Marshall Stability Test Apparatus as per the specifications of the clients. Working This is for use with hot mixture containing asphalt or tarAggregate up to 25 mm maximum size Attributes Accurate constructionCustom manufacturedEasy operational featuresOffer test results with perfection The equipment comprises of following Three specimens cylindrical mould 100 mm diametermeterThree base platesThree collars 100 mm diametermeterTwo compaction hammers, 10 lbs. Weight, with 45 cm dropOne specimen extractorOne compaction pedestal complete with specimen holderOne breaking head assembly. Complete with diameterl micrometer and bracket for flow measurementOne load transfer barOne loading unit, motorized, with travel of 50 mm/min and fitted with motor, reversing switch and limit switches to restrict the travel. Fitted with hand wheel for finer adjustment to bring the proving ring in contact with breaking head assembly, capable of application of loads up to 5000 kg. Suitable for operation from Main supply 230 volts, 50 cycles, single phase, A.C.Proving ring of 5000 kg (50 K.N.)Diameterl gauge .01 mm x 25 mm travel

• Capacity: 108 Liters
• Test Types: NSS + CASS Test
• Temperature Uniformity: ≤ ± 2°C

Whether you are new to corrosion atmosphere testing or have been conducting testing for years, we present Salt spray chambers or Salt Fog Chambers that are not only easy to use and maintain but also provide the accuracy and flexibility necessary to meet today's demanding corrosion test procedures including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. These machines create three types of manually adjusted environment; salt spray, high humidity and air drying at any given temperature within the chamber. Any combination of these environments can be programmed, in any order, to form a corrosion cycle. Such a corrosion cycle can be automatically repeated a predetermined number of times. Our models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS), Seawater Acidified Test (SWAAT) or Cupric Acid (CASS). Models above 480 Liters of capacity are ideal for Cyclic Corrosion Cabinet (Cyclic Corrosion Chamber). In Laboratories corrosion tests are used extensively for selection of materials and their surface protection. Our Corrosion box chambers are what you need to predict corrosion resistance of materials such as paints and coatings and are designed and developed to meet the widest possible range of industry standards:

• Automation Grade: Manual
• Material: Aluminium
• Application: Soil Testing
• Color: Black
• Finishing: Powder Coating
• Weight: 1.800kg

Cone Penetrometer is used for finding the limit limit of soil whose plastic index is low. it is as per IS Standard. it is consist of frame with graduated scale at the front, the cone is fitted at the bottom of the rod which pass through the scale., one brass container of 50mm dia the whole unit is packed in cardboard box.

• Integral type proving Ring capacity: 3000Kgs
• A dial gauge: 0.01 x 25mm.

Originally developed by Bruce Marshall, a highway engineer in U.S.A later on standardized by ASTM. Generally the test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is measured when the same is loaded at periphery at 5cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmers for paving jobs. There are two major features of the Marshall method of designing mixes namely. a) densityvoids analysis, b) Stability-flow tests. The Marshall stability of mix is defined as a maximum load carried by a 0 compacted specimen at a standard test temperature of 60 C. The flow value is deformation the Marshall test specimen at under goes during the loading upto the maximum load, in 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity.

he Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron base with course and fine leveling screws, a digital penetration measurement gauge 0.01 mm resolution/readability and an automatic penetration timer unit. The is equipped with a digital, 99 second timer, which can be set to the standard 5 second free-fall time or to some other setting for customized tests. When engaged the timer will allow the needle to free fall into the sample for the specific time interval and then lock the needle from advancing while providing a direct reading of the test results 320 g weight should be added to the 30° angle cone to get a total weight of 400 g for the shear strength test. Semi-Automatic Penetrometer for Liquid Limit supplied complete with: Automatic Penetration Timer Unit 30° Penetration Cone Sample Cups, 3 pcs. Aluminium, Ø55 mm x h:35 mm. Semi-Automatic PenetrometerAutomatic Penetration Timer Unit30° Penetration ConeSample Cups, 3 pcs. Aluminium, Ø55 mm x h:35 mm.Best Quality Machine

• Material: Metal
• Application: Industrial
• speed: 20 to 180 RPM
• Resistivity: Rust Resistant
• Durability: Long Life
• Surface Finishing: Polished
• Drive Type: Electric

Flocculator has been specially designed for use in water treatment plants to correctly estimate the Dosing of alum and such other coagulants for treatment of water and sewage. In provides identical Test conditions for all samples. Illumination base consists of fluorescent tube mounted below translucent plastic plate to provide diffused cold light through floc samples. Flocculator consists of heavy duty DC DRIVE variable speed motor heaving speed from 20 to 180 RPM with built in speed control. Stainless Steel Stirring rods are provided with adjustable spacers to adjust the depth of stirring Paddles. The stirring shaft can be removed without disturbing other stirrers. The unit is supplied without beakers to work on 220230 Volts A.C.

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

1. Two Line LCD display 2. Soft touch key paid for easy operation. 3. Nineteen No. routine test set & Five Nos. sustain release test set in memory. 4. On Line print out facility. 5. Water circulation for uniform temperature. 7. Up Down motorized lifting with limit switch. 8. Vibration free drive with electronic motor. ALL THE ABOVE MODELS ARE AVAILABLE WITH MATERIAL OF CONSTRUCTION IN M.S. BODY DULY POWDER COATED BODY OR STAINLESS STEEL S.S. 304 BODY (GMP MODEL)

• Material: Aluminium, Stainless Steel
• Size: 25 mm, 50 mm, 75 mm, 80 mm, 100 mm .

The percentage passing of different fractions determines the porometry of the geotextile investigated. In the Hydrodynamic Sieving Method, the geotextile specimen, loaded with a certain quantity of glass bead fraction, is continuously rotated in a water trough, forcing the glass beads to pass through the geotextile openings. The apparatus consists of two test drums of 14 cm dia and 7 cm effective length with 16 nos. of 4 mm dia rods provided circumferentially at equal spacing to hold the geotextile specimen in position. Two troughs to contain the test drums are supported on horizontal axis, facilitating free rotation and capable of being filled with distilled water to a level of 20 mm below the drum axis. The clearance between the trough and the geotextile could be maintained at about 40 mm. The apparatus is provided with a motor drive and gear assembly to enable rotation of the drums at a speed of 5 rpm to 30 rpm. For conducting the test, the Geotextile specimen is cut and stitched to get a shape of 14 cm dia and 10 cm length to insert over the drum tightly, after immersing the specimen in distilled water for one hour, and secured by rubber 'O' rings. After placing 50 g of smallest size glass beads inside the drum, the lid is secured and the drum with the geotextile placed in distilled water to the desired level and rotated at 20 rpm for 1,500 cycles. In order to get the optimum filtration opening size, the drum is rotated at a speed of 5 rpm to 30 rpm for 250 to 2,500 revolutions. The percentage of beads passed through the geotextile by dry weight is determined. The test is repeated with increasing size of glass beads till 5% or less of the beads by weight pass through the geotextile. Rounded Beads made of glass, size 0.85 mm (passing 1 mm and retained at 0.85 mm)Rounded Beads made of glass, size 0.425 mm (passing 0.85 mm and retained at 0.425 mm)Rounded Beads made of glass, size 0.25 mm (passing 0.425 mm and retained at 0.25 mm)Rounded Beads made of glass, size 0.18 mm (passing 0.25 mm and retained at 0.18 mm)Rounded Beads made of glass, size 0.15 mm (passing 0.18 mm and retained at 0.15 mm)Rounded Beads made of glass, size 0.075 mm (passing 0.15 mm and retained at 0.075 mm) SGE-1018 Interface Friction Test Apparatus for GeotextileNote Direct shear apparatus not a part of this instrument  

The company is primarily engaged in the manufacturing, exporting, and supplying the highest-grade marshall apparatus in all across the globe. Our marshall apparatus is highly acclaimed by the national as well as international clients, for their excellent efficiency and working life. The marshall apparatus can be availed at the most competitive prices from us. description marshall load frame cap 50kn speed-50.8mm/min : 1 nobreaking head stability mould : 1 nocompaction mould steel, cylindrical : 3 nobase plate : 3 noextension collar : 3 nocompaction pedestal & manual operation, comprising steel : 1 noplate capped on a wooden post. A mould clamp is hutted to the top of the platecompaction hammer for use with compaction pedestal and 2 no. Mould, weight 4.5kg with a free fall of 457mmload transfer bar : 1 no

• Application: ETP, STP, R&D laboratory, Hotel Industry, Industrial Complexes, Water Research Industry
• Power: 220 v ac supply, 50 Hz, 100 W
• Temperature: 35 oC
• Features: Finds usage as Laboratory mixing and stirring equipment, Efficient and Economical handling of Flocculation matter, Correct estimation of dosing of alum and other coagulants
• Speed range: 2 to 250 RPM (Made available in variable speed control)
• Pre-set programs: 2
• Timer: Digital timer supports – 0 to 99 minutes
• Controls Keypad: Touch-sensitive
• Digital Display: LED, digital rpm indicator support
• Accuracy: +/-  2 RPM
• Size: Standard and Customized
• Body: Powder-coated body finish
• No. of Jar : 2, 4, 6

• Brand Name: Weiber
• Illumination: Fluorescent light illumination greater than 800 lux on work table.
• Model Number: ACM-1212FH
• Air flow: Unidirectional
• Constructions: Industrial grade mica clad wooden board/ steel
• Packaging Details: As Per Customize Requirement
• Blower assembly: Centrifugal lubricated bearing type ISI marked assemblyc
• Classification: Other
• Sink: Stainless steel sink with tap
• Power requirements: 500 watts -750 watts( model specific)
• Air flow control: Three step air flow speed controller

• Certification: CE Certified
• Color: Brown, Grey, Light White
• Voltage: 220V
• Driven Type: Electric
• Warranty: 1year, 2years, 3years
• Application: Soil Testing

We manufacture Fume Hood that is available in different shapes and sizes. The Fume Hood, available with us, is aptly designed to release all the toxic vapors and hence protecting the instruments as well as people working in the lab. Salient Features : Robust constructionHigh capacityDimensional accuracyEasy to useCost effective Ideal for : Laboratories Specifications : Working Size :4' x 2' x 2'6' x 2' x 2'5' x3' x 2'

• Features: Rugged construction, Easy to use, Compact design, High functionality, Longer functional life, Durable .
• Weight: 3.5kg
• Speed: 36 rpm
• Load Capacity: 9 tubes
• Motor Type: sryrinconised
• Brand Name: pacific

SPIC Hot Deformation Test apparatus, ABT Meter

Bitumen Testing Instruments, Soil Testing Services, Cement, Concrete

Halogen Acid Gas Test Apparatus, toxicity test apparatus

Nuclear Density Gauge, Construction Equipments, testing measuring equipments

Thermal Stability Test Apparatus, Hand Hold Flammable Gas Detector

Autoclave, Autopsy Table, Bio Safety Cabinet, Bod Incubator

Laboratory CBR Test Apparatus, Compaction Factor Apparatus