Solar Hot Water Heater Dealers in Wazirpur, Delhi

SOLWET ADVANCED natural circulation systems; circulation in the solar primary circuit is caused by natural convection, due to the differences in density between the hot and cold working fluids. The cycle begins as the fluid passes though the collectors, where it is heated by solar radiation. As the fluid is heated, it rises up towards the cylinder located above the collector. As the fluid travels towards the elevated cylinder, it transfers its heat and chills. The heavier, chilled fluid then descends through the return pipe to the bottom of the collector. The main advantage is that the system functions without the need for pumps or any auxiliary electrical power.

• Type: :
• Capacity of Tanks: :
• 100 LPD: Material
• :: Stainless Steel /GRP/Boiler grade steel.
• Cylindrical – horizontally assembled.: Size
• :: Ø460, Length 1000.
• Insulation: :
• P U F.40-50mm.: Outer Cladding
• :: Pre coated galvanized Steel/Aluminum.
• Outer Finishing: :
• Pure Polyester Powder Coating finish.: Outer Finish Color
• :: Golden Yellow & Black combination.
• Back up Heater: :
• 2 KW With thermostat control 230V AC.: Tank Supports
• :: Fabricated Stainless steel.
• Tank Testing: :
• Factory pressure tested for normal systems is at 1 Kg/cm².: Normal Working pressure of the system
• :: Less than 0.3 Kg/cm².
• Number of Tubes: :
• 14 No’s: Evacuated Tube Dimensions
• :: Outer Diameter - 47± 0.7.mm, Inner Diameter- 37±0.7.mm
• Total Tube length: :
• 1500.±5mm.: Type of tube selective coating
• :: Graded Al-N with Copper under Coating
• Configuration of Glass Tubes: :
• Two Concentric Borosilicate Glass Tubes.: Solar absorbance
• :: >0.93.
• Solar Emmitance. (at 80°C): :
• <0.06.: Evacuation between Outer & Inner Tubes
• :: 5 X 10-3 Pa.
• Rated Pressure: :
• 0.1. Mpa. (1.Kg/Cm²): Stagnation Temperature
• :: <300°C

Solar Water Heaters, solar slow pumps, solar charge connectors

Solar Water Heaters, Solar Home Lights, Solar Cfl 45watt Home Lights