Special Purpose Pump Dealers in Delhi

mg409xd0gt00000+mgcf31s magnet drive gear pump (ink throwing pump) main applications medical and surgical equipment hemodialysis apparatus  laser apparatus  lubrication  ink-jet printing systems

We are offering sealless magnetic drive pumps, non metallic pump, megnetic drive pumps. mg series pumps are injection moulded, non metallic, megnetic drive, close coupled, horizontal, single stage, end-suction, centrifugal pump with rotary shaft design to surpass performance expectations in the most demanding chemical applications and enviroment.

These Pumps can handle low density (1.25 pgs.) clear liquids, up to 90oC. The wetted component are made from high quality poly propylene, Viton, Teflon and ceramics. These Pumps has no seal, no coupling, no leakage and light in weight. It is a simple and compact design and maintenance free. These are used for Photo Cine Plants, Filtrations system, Photo Processor, Electroplating equipment, Etching Liquid Circulation and Pharmaceuticals Industries etc. 

• Driven Type: Electric
• Voltage: 240 V
• Frequency Range: 50 - 60 Hz
• Phase: Single Phase
• Power Consumption: 3 HP

• Pressure: Upto 25Bar and more
• MOC: PP-PV-PVDF-PP-SS
• Flow: Min 5 ml

DDA – SMART Digital Series Pumps (0.0007 to 8 gph) The DDA SMART Digital dosing series represents the latest generation in Digital Dosing pumps from Grundfos. Its impressive intelligence and decision making capabilities go beyond any existing metering pump technology in the market. The DDA can not only inject chemicals and verify injection; it can also measure valuable data such as flow or pressure. The pump can then diagnose the operation status based on the relationship between the diaphragm displacement and the pressure inside the head. The pump is so smart it can tell you if there are air bubbles inside the head. This technology goes even further. Thanks to its impressive logic capabilities, the DDA can make decisions to display and/orcorrect failures such as overpressure, valve leaks or air bubbles Smooth and Continuous DosingEnsures an optimum mixing ratio at the injection point without the need for additional accessories, such as static mixers. It also provides significant reduction of pressure peaks, preventing mechanical stress on wearing parts such as diaphragm, tubing, and connections, resulting in less maintenance required. Full Stroke Length at All TimesThe pump always operates at full stroke length, irrespective of the capacity set; this ensures maximum volume displacement per stroke, optimum accuracy, easy priming and improved suction. Up to 3000:1 Turndown RatioThe Digital Dosing range is designed to give you superior flexibility and accuracy even when dosing very small volumes. Maximum Capacity SettingWith the DDA series you decide what the maximum capacity should be. You can select any value within the performance range of each model and the pump will redefine the injection speed and adjust the operation scale within that range. So you only need a few models to cover multiple applications. Anti-Cavitation / SlowModeThe variable speed of DDA pumps facilitates a unique anti-cavitation function for high viscosity liquids. This function provides slower suction speed (50 or 25% of the maximum speed), ensuring optimal priming and pumping of even the most difficult liquids. Flow MonitoringThe DDA FCM pump can precisely measure and display the actual dosing flow. Via the analog 0/4- 20 mA output, the actual flow signal can easily be integrated in any process control system, without needing additional measurement equipment. Pressure MonitoringThe integrated pressure sensor measures the actual pressure of the system, which is shown in the display. In case of an overpressure situation, the pump will stop injecting, generate an alarm on the display, and trigger a relay. The pressure can also be monitored via the 4-20mA signal output. AutoFlowAdaptThe DDA FCM pump can recognize pressure fluctuations on the discharge line and adapt the speed to compensate the injection, maintaining a constant feeding set point.

• Brand Name: Promivac
• Motor Horsepower: Standard
• Max Flow Rate: Standard
• Usage/Application: Commercial
• Capacity: Standard

• Type: Pvdf Pumps
• Material: Pvdf
• Application: Cryogenic, Metering, Sewage, Submersible
• Application: Air Pump, Oil, Water
• Power: Electric
• Pressure: High Pressure, Low Pressure
• Motor Capacity: 3 to 40HP
• Speed: 1440,2900RPM

• Features:: Highly robust, Superb rust resistance, Unmatched abrasion resistance Highly efficient operation Longer working life, Minimal maintenance needs

X-ray plants, Filtration system, Photo processors, Electroplating equipments; Metal finishing machines, Chemical filters, Water treatment plants; Etching machines, Liquid circulation, Agritation descaling of refrigeration; air condition units, Silver recovery system, Dye bath; Heat exchanger, Dairy, Boiler, Medical equipments; Pharmaceutical industries, Textile processing industries;

• Type: Magnetic Drive Pumps
• Application: Liquid End Fluid
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Color: Blue, Brown, Green, Grey, Light White, White
• Condition: New, Used
• Automatic Grade: Automatic, Manual, Semi Automatic
• Power: 1-3kw, 110V, 220V, 3-6kw, 380V, 440V, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic
• Warranty: 1year, 2years
• RPM Power: 1400-2800/Hr

• Motor Horse Power: 3 HP
• Phase: 1
• Country of Origin: Made in India
• Power Source: AC Powered
• Head: 0-5m
• Maximum Pressure: 50-100 bar

• Flow Rate: Up to 3500m3/hr
• Pressure: up to 70Kg/cm2
• Temperature: - 1200C to +4500C

a leading worldwide specialist in the market of Industrial Pumps and Valves. The chemical and petrochemical industries make extensive use of their Magnetic drive technology.

The Fluorinated Polymer are widely appreciated for their remarkable chemical inertness and their excellent resistance to ageing.POLYVINYLIDENE FLUORIDE (PVDF) offers the specific advantage of easy processing in accordance with all the convection methods used in the plastic industry. PVDF, polymerized, according to its own special process, offers a high degree of crystallinity to that by other processes, resulting among other things, in superior thermomechanical properties. The intrinsic technical superiority is one of the reasons for the success which PVDF has achieved on the world market for more than 20 years. Easy processing by : extrusion, injection, compression, rotational moulding, blow moulding etc. Chemically inert to most acids, aliphatic and aromatic organic solvents, alcohals etc. Very high purity. Excellent mechanical properties over a wide range of temperatures : tensile yield strength up to 55 MPa at 23°C and 10 MPa at 150°C. Abrasion resistance comparable to that of polyamides, and relatively low coefficient of friction. Continuous use at temperatures as high as 150°C for the homopolymer grades (without mechanical stress). Excellent thermal aging resistance : tensile yield strength retention over 90% after 25,000 hours at 150°C in a ventilated oven. Unaffected by UV (>232nm) and good resistance to gamma radiation. Excellent intrinsic fire resistance. Very easily joined by welding and good capability for thermoforming. Physiologically harmless and approved for contact with food products (FDA).   Advantages at a Glance Tried and tested chemical process pump design for rough conditions. Thick-walled vacuum-proof plastic housing in one piece. Therefore no additional sealing points in the pump housing. Plastic housing completely encapsulated in a metal armour of tough material. Pipeline forces are absorbed by the metal armour. Also suitable for high system pressures. Flanges with through holes meeting the requirements of the chemical industries. Semi-open PVDF impellers reinforced by large metal inserts. Smooth running and long service life of the mechanical seal, thanks to the particularly heavy duty bearing pedestal. Modular system ensuring economical spare parts stocking. External corrosion protection of pump and base plate by an epoxy paint Pump Casing Linear & ArmourPVDF liner is completely encapsulated in the metal armour (shell). All sealing points are metal supported and "flowing" of the PVDF is thus limited. The robust armour absorbs all the loads in the system and from the suction.Slide in UnitPump without casing with semi-open PVDF impeller and solid injection moulded PVDF back plate.Shaft SealingExternal mounted teflon bellow-type single mechanical seal and high alumina ceramic stationery sealing face.

Application  Pilot plants, Galvanizing, Anodizing, Plating Plants, Water treatme plants.  Coolant pumping for leser systems & and machine tools.  Etching machines,Metal finishing machines, Gas analysers, Spark errosion machines.  X-ray photo processors, Color photo processors, Ultra sonic cleaners, Medical equipments.  Solar heating systems ,I.C. photo engraving machines,Display devices,TV tube processing.  Dairies, Soft drinks Bevarages, Pure water plant, Domestic Aquariem.  General laboratories, Silver recovery systems, Water processors, ice makers. Advantages Leakproof pump without Mechanical seal and galnd packing. Light weight, Portable. Suitable for 0 to 80 deg temp. Operation Principle   The centrifugal pump is driven by a pair of magnet which are incorporated in the impeller and motor shaft respectively. The sealess pump structure elliminates shaft seals such as conventional mechanical seals, because the pump chamber is shielded the casing and the impeller is operated by magnet.The combine couplig torque of the drive magnet and impeller magnet drives sufficient driving power against the motor torque .

• Material: PVDF
• Head: 60m
• Brand: Ambey, Lubi
• Max Flow Rate: 90m3/hr
• Model Name/Number: Lubi Pumps
• Temperature: 120 Degree C
• Discharge Size: 50mm
• Speed: 1440RPM - 2900RPM

The Waukesha Shear Pump's wide choice of modularly interchangeable stators and rotors makes It a most versatile and compact processing system component for binding, mixing, emulsifying, texturizing and smoothing... with no aeration. Its operation involves mechanical, ultrasonic,hydraulic and controlled cavitation , phenomena, The product's rate of flow through a controllable stator-rotor arrangement, plus the variable RPM of the Shear Pump, determines the ulti- mate effect of the Shear Pump on the product. For processing high viscosity material, the Shear Pump is fed with positive pressure using a Waukesha positive displacement pump. Construction featuresHousing - 316 stainless steelStator/Rotor - 316 stainless steelDischarge Port - Adjustable at 90" horizontal and vertical intervalsSeal Flush - OptionalShaft-316 stainless steelBearings - Double tapered roller and ballSeals - Mechanical face-typeViscosity Range - Limited only to the maximum 150 PSI pressure to force feed the pump. Products exceeding 1,000,000 cps have been processed.    Compact Design Energy Saving Precise, non-adjustable plunger seal Longer Seal Life Secure Aseptic Option Safe From Over-Pressures