Stepper Motor Controller Dealers in Delhi

Features of stepper driver tstep-484: a perfect micro stepping drive by using sinusoidal current for an accurate motion. Tstep 484 can drive motor with which can run on 20v-48v rated voltage and 4a rated current. Jumper selectable drive current for driving range of stepper motor. Opto isolated step and direction inputs and error outputs. When the motor is stopped, there is less motor heating with automatic current reductions. Drive is very compact and less installation space is required. Maximum torque is achieved at high rotational speed by automatic current compensation usage. Smooth motion without resonance. The drive is versatile and can be used with a range of stepping motors. Protection from short circuit. You can use drive with 4,6 and 8 lead steppers in bipolar series, in half coil or parallel configurations. Made in india stepper drive specification series model : tstep-484 rated voltage : 18v-48v rated current : jumper selectable 0.7a to 4.2a micro stepping : yes idle current reduction : yes short circuit protection : yes isolated step dir inputs : yes

• Warranty: 1 Year
• Motor Connectors: Screw Terminals
• Operating Voltage: 5V
• Power Consumption: 36 mA (logic)
• Size: 49 x 55 x 33 mm
• Weight: 33 g

• Country of Origin: India
• Step Angle: 5.6°
• Operating voltage: 5V
• Operating current: : 0.5A

This is a small, cheap, and high-quality gear stepper motor. It is a widely popular combination of the stepper motor and stepper driver. This combination is very reliable and stable in use. The speed of the motor is 15 rpm. This motor is a unipolar stepper motor that has 5 wires. The driver amplifies the control signals from the Arduino to control the motor. The control of the motor's movement angle is done by controlling the number of stepper motor driver pulses. The speed of the stepper motor rotation is also controllable by controlling the frequency of the pulses. The compact design is perfect for small robots. Features   High-quality stepper motor with driver The speed of the motor is 15 rpm The perfect combination for the robots which need precise control

• Voltage: 220-240 V
• Display Type: LCD
• Frequency: 50-60 Hz
• Step Angle: 1.8 Degree
• No. of Phase: 2