Structural Adhesives Dealers in Kirti Nagar, Delhi

• Color: Colourless, clear
• Hardner: Methyl Ethyl Ketone Peroxide
• Complete Drying Time: 24 Hours
• Gel Time: 4 - 5 Minutes
• Stackability: 10 - 30 Minutes
• Workability: 24 Hours

By using the Marmomastic Gel, there are following stone adhesive advantages. Used for bonding Fast Hardenning Highly polishable Ease of dosing and mixing Usable at high temperature Water resistant Petrol and Oil resistant Good Adhesive of Natural Stone Areas of Application As a renowned Stone Adhesive Marmomastic Gel is being applied at different areas and stones. Natural Stones Artificial Stones Building Material Travertine Marble Directions Surface Preparation Surface should be free from dirt, debris, efflorescence and other loose particles. Surface should be cleaned and slightly roughened Dry the surface before using adhesive. The adhesive can not be used on wet or damp surfaces as it doesn't allow the surface to dry completely. Mixture Preparations Empty 100 grams of Part - A to every 2-4 grams of Part B in a clean container. Stir well to mix completly to get a neuteral colour glueing adhesive. Please Note : Mixture once prepared has to be used immediately within 20-30 minutes Maintain a temperature of 25°C while working with Marmomastic gel.   Application Once the patch test is fine, pour the contents on the suface to make the surface hard. Strike excess material to get a smooth surface. Use standard techniques to work with the adhesive. Wait for 6 - 8 hours after the application to achieve desired bond. Maximum hardenning will be achieved only after 7 days of the application. Try and keep the surface warm as it expedites the hardenning process, whereas, cold temperature retards the process. LIMITATIONS Stability of the bond is highly dependent on the nature of the natural stone to be bonded. Close container tightly when not in use and do not store the unused material. Patch test recommended. Before applying on a large surface, check product performance on a smaller patch  

• Feature: Highly reactive
• Form: Gel
• Colour: Red,Pale Yellow
• Packaging Type: Alluminium Tin
• Uses: Floor and Wall
• Certification: ISO Certification 9001-2008

Rubber Adhesives, PVC Films, Lamination Films, ADHESIVE

cold binding adhesive, heat seal blister varnish, Heat Seal Lacquer