Swastika India Masjid Moth, Delhi

Avail from us high quality tin printing inks that are used for tin printing on tfs, black, tin, etp, and steel degreased plain plates after creating an internal surface by sizing (vinyl, alkyd or epoxy) or without sizing. The ink consists of a varnish system that is used as a binder, which dries by heating at 150-170oc for 12 minutes. Our inks are oil-based inks and are highly viscous with 100% solids that are very finely grinded to get the smoothest and clean finish. Appreciated for : fast dry speedlongevityhigh glosshigh densityfine grindingexcellent print finishhigh viscosityexcellent adhesionperfect coloursmooth finishexcellent lusterscratch resistant used for printing on : tfs platesblack platestin platesetp platessteel-degreased plain plates

Avail from us high quality tin printing inks that are used for tin printing on tfs, black, tin, etp, and steel degreased plain plates after creating an internal surface by sizing (vinyl, alkyd or epoxy) or without sizing. The ink consists of a varnish system that is used as a binder, which dries by heating at 150-170oc for 12 minutes. Our inks are oil-based inks and are highly viscous with 100% solids that are very finely grinded to get the smoothest and clean finish. Appreciated for : fast dry speedlongevityhigh glosshigh densityfine grindingexcellent print finishhigh viscosityexcellent adhesionperfect coloursmooth finishexcellent lusterscratch resistant used for printing on : tfs platesblack platestin platesetp platessteel-degreased plain plates

We offer tin printing inks that is used in tin printing after creating an internal surface by sizing (vinyl, alkyd or epoxy) or without sizing. The ink consists of a varnish system that is used as a binder, which dries by heating at 150-170oc for 12 minutes. Our inks are oil-based inks and are highly viscous with 100% solids which are very finely grinded to get the smoothest and clean finish. Appreciated for : fast dry speedlongevityhigh glosshigh densityfine grindingexcellent print finishhigh viscosityexcellent adhesionperfect coloursmooth finishexcellent lusterscratch resistant used for printing on : tfs platesblack platestin platesetp platessteel-degreased plain plates

Avail from us high quality Tin Printing Inks that are used for tin printing on TFS, Black, Tin, ETP, and Steel degreased plain plates after creating an internal surface by sizing (vinyl, alkyd or epoxy) or without sizing. The Ink consists of a varnish system that is used as a binder, which dries by heating at 150-170oC for 12 minutes. Our inks are oil-based inks and are highly viscous with 100% solids that are very finely grinded to get the smoothest and clean finish. Appreciated for : Fast dry speedLongevityHigh glossHigh densityFine grindingExcellent print finishHigh viscosityExcellent adhesionPerfect colourSmooth finishExcellent lusterScratch resistant Used for printing on : TFS platesBlack platesTin platesETP platesSteel-degreased plain plates.

Avail from us high quality Tin Printing Inks that are used for tin printing on TFS, Black, Tin, ETP, and Steel degreased plain plates after creating an internal surface by sizing (vinyl, alkyd or epoxy) or without sizing. The Ink consists of a varnish system that is used as a binder, which dries by heating at 150-170oC for 12 minutes. Our inks are oil-based inks and are highly viscous with 100% solids that are very finely grinded to get the smoothest and clean finish. Appreciated for : Fast dry speedLongevityHigh glossHigh densityFine grindingExcellent print finishHigh viscosityExcellent adhesionPerfect colourSmooth finishExcellent lusterScratch resistant Used for printing on : TFS platesBlack platesTin platesETP platesSteel-degreased plain plates.

Avail from us high quality Tin Printing Inks that are used for tin printing on TFS, Black, Tin, ETP, and Steel degreased plain plates after creating an internal surface by sizing (vinyl, alkyd or epoxy) or without sizing. The Ink consists of a varnish system that is used as a binder, which dries by heating at 150-170oC for 12 minutes. Our inks are oil-based inks and are highly viscous with 100% solids that are very finely grinded to get the smoothest and clean finish. Appreciated for : Fast dry speedLongevityHigh glossHigh densityFine grindingExcellent print finishHigh viscosityExcellent adhesionPerfect colourSmooth finishExcellent lusterScratch resistant Used for printing on : TFS platesBlack platesTin platesETP platesSteel-degreased plain plates

Avail from us high quality Tin Printing Inks that are used for tin printing on TFS, Black, Tin, ETP, and Steel degreased plain plates after creating an internal surface by sizing (vinyl, alkyd or epoxy) or without sizing. The Ink consists of a varnish system that is used as a binder, which dries by heating at 150-170oC for 12 minutes. Our inks are oil-based inks and are highly viscous with 100% solids that are very finely grinded to get the smoothest and clean finish. Appreciated for : Fast dry speedLongevityHigh glossHigh densityFine grindingExcellent print finishHigh viscosityExcellent adhesionPerfect colourSmooth finishExcellent lusterScratch resistant Used for printing on : TFS platesBlack platesTin platesETP platesSteel-degreased plain plates

We offer high quality stamping inks that are highly viscous with 100% solids that give the smoothest and clean finishing. We encompass a comprehensive range of stamping inks for tin, aluminum, paper, polybond (hdpe) and rubber printing. These inks consist of various varnish systems depending upon the substrate to be printed. The ink is self-drying or dries by heating. Customers can avail the stamping inks at the most affordable prices. Known for : excellent print claritysharp printingeasy and fast dryinggood impression applications : tinaluminumpaperpolybond (hdpe)rubber

We offer a complete range of Special Concentrates of inks, solvents, reducers, varnish, etc. to the printing unit, so the printers can do urgent special matching instead of waiting and wasting time. The concentrates are different for different kinds of inks. Concentrates can play a key role in a printing unit for setting up an In-house Matching Lab which helps the printer to save time by quick in-house matching of urgent shades, upgrading the quality and cost effective. In fact, In-house Matching Lab is a wonderful way to use your leftover inks and hence reduce your wastage. With the help of In-house Matching Lab one can create any shade as per the requirement. This has an added advantage of maintaining secrecy of certain special shades created. Products required : 13 colours 6-7 equipments6 auxiliaries10-12 hours of training and the company is ready to run an In-house Matching Lab.

We are recognized as a leading manufacturer and supplier of a wide assortment of silk screen printing inks that are low viscosity based. Our range of inks has been formulated for printing on tin and aluminum, after creating a base surface by coating the plate with sizing (vinyl, alkyd or epoxy) or without sizing (washed by mto or vinyl solvent). These inks are also being used on rubber, plastic and paper. The top drying time of the inks is one hour and full drying time is three to four hours. Special features : fine grindinghigh print densityfast dry speedexcellent print finishhigh viscosityexcellent adhesionperfect colourscratch resistantexcellent opacity used for printing on : tinaluminumrubberplasticpaper

Our range of rubber inks have been specially formulated for printing and stamping on rubber substrates and for marking tyres, tubes and other rubber products. These inks are mainly low viscosity based. The have been specially formulated for treated or untreated rubber fabrication. They consist of a varnish system that is used as a binder, which dries, either by heating or by airdrying. Known for : fine grindinghigh print densityfast dry speedexcellent print finishhigh viscosityexcellent adhesionperfect coloursmooth finishexcellent lusterscratch resistantexcellent opacity applications : tyre industryrubber industrytube industry

We are a reliable manufacturer and supplier of a wide range of polybond inks (hdpe) that are mainly low viscosity based. Our array of polybond inks (hdpe) has been specially formulated for treated or untreated woven sack fabrication. Woven sacks and bags are mainly used for outer packaging of products. The printing process used is flexographic printing. These inks can be formulated for different resistant properties. The top drying time of the inks is three hours and full drying time is six hours. Our polybond inks (hdpe) can be availed at the most reasonable prices. Acclaimed for : fine grindinghigh print densityfast dry speedexcellent print finishhigh viscosityexcellent adhesionperfect coloursmooth finishexcellent lusterperfect glossscratch resistantexcellent opacity

The paper offset inks (paper and screen) offered by us are high on demand in the market and are acknowledged for their compliance with the highest international standards. These oil-based inks are highly viscous with 100% solids very finely grinded to get the smoothest and clean finish. The ink consists of a varnish system that is used as a binder, which dries, either by heating or by air-drying. Praised for : capability to print at higher speeds, high print density, fast dry speed, excellent print finish, fine grinding, perfect colour, excellent luster. Used for printing on : paperboard.

We are engaged in the manufacture and supply of an exclusive array of coatings or toners that are miscible with vinyl, or alkyd. These dye or pigment based coatings find application in various industrial areas and comply with the highest international standards.the coatings offered by us are formulated from high grade raw materials. The coatings that we offer can be availed at the most reasonable prices. Special features : excellent adhesionperfect coloursmooth finishextensive coverageexcellent lusterperfect glossscratch resistantexcellent opacity

We offer huge assortment of aluminum printing inks that is high on demand in the market. Our array of aluminum printing ink is used in aluminum printing for aluminum plates, washed by mto or vinyl solvent and then creating a base surface by coating the plate with sizing (vinyl, alkyd or epoxy) or without sizing. These inks are oil-based inks and are highly viscous with 100% solids very finely grinded to get the smoothest and clean finish. Made as per f.d.a. Approved raw materials the ink offered by us consists of a varnish system that is used as a binder, which dries by heating at 150-170 0 c for 12 minutes. Preferred for : excellent print finishhigh print densityfast dry speedhigh viscosityfine grindingexcellent adhesionperfect coloursmooth finishexcellent lusterperfect glossscratch resistant dries by heating at : 150-170oc for 12 minutes.

Available with us is a huge assortment of Aluminum Printing Inks that is high on demand in the market. Our array of Aluminum Printing Ink is used in aluminum printing for aluminum plates, washed by MTO or vinyl solvent and then creating a base surface by coating the plate with sizing (vinyl, alkyd or epoxy) or without sizing. These inks are oil-based inks and are highly viscous with 100% solids very finely grinded to get the smoothest and clean finish. Made as per F.D.A. approved raw materials the ink offered by us consists of a varnish system that is used as a binder, which dries by heating at 150-170 0 C for 12 minutes. Preferred for : Excellent print finishHigh print densityFast dry speedHigh viscosityFine grindingExcellent adhesionPerfect colourSmooth finishExcellent lusterPerfect glossScratch resistant Dries by heating at : 150-170oC for 12 minutes.

Available with us is a huge assortment of Aluminum Printing Inks that is high on demand in the market. Our array of Aluminum Printing Ink is used in aluminum printing for aluminum plates, washed by MTO or vinyl solvent and then creating a base surface by coating the plate with sizing (vinyl, alkyd or epoxy) or without sizing. These inks are oil-based inks and are highly viscous with 100% solids very finely grinded to get the smoothest and clean finish. Made as per F.D.A. Approved raw materials the ink offered by us consists of a varnish system that is used as a binder, which dries by heating at 150-170 0 C for 12 minutes. Preferred for : Excellent print finishHigh print densityFast dry speedHigh viscosityFine grindingExcellent adhesionPerfect colourSmooth finishExcellent lusterPerfect glossScratch resistant Dries by heating at : 150-170oC for 12 minutes.