Synchronization Panels / Synchronized Control Panels Dealers in Delhi

We are the largest manufacturer and suppliers of DG Synchronization Panel. The finest quality range offered by us is highly demanded due to the optimum strength, durability and shock resistance. They are made using top grade raw materials and latest technology in accordance with the set industry norms. They are easy to install and are available in varied specifications as per the demands of the clients. We undertake bulk orders with an assurance of prompt delivery.

• Material: Steel
• Shape: Rectangle
• Application: Industries
• Color: Grey
• Feature: Excellent Reliabiale, High Mechanical Strength, Maintenance Free
• Phase: Double Phase, Single Phase, Tripple Phase

Our company is reckoned as one of the chief Manufacturers, Exporters and Suppliers of Synchronizing Panels from India. It is precisely designed to work between two or more different power sources like DG sets to manage power supply. This system facilitates synchronization that further helps in making different DG sets behave as a virtual single unit. Application of Synchronizing Panel also eliminates subdivision of total load. Available in different specifications, these panels are stringently comply with set industry standards and are quality approved by the authorities. They are well applauded for high quality, efficiency, reliability and durability. Automatic Control of Diesel Generator Sets incorporating following functions : AMF (Auto- Mains failure) AS (Auto Synchronizing) ALS (Auto Load Sharing) LDSS (load Dependent start / Stop) LS (Load shedding) Common Control PLC Panel for up to 8 Diesel Generator Sets SCADA View terminal Points Manual Synchronizing of Diesel Generator Sets Protection & Control of Diesel Generator Sets through Multi Function relay Man Machine Interface (MMI) Annunciation & fault indication

• Voltage: 440 V
• Phase: Three Phase
• Frequency: 40 to 50 Hz
• Brand Name: Pieco

• Supply System: 3 Phase, 4 Wire
• Rated Service Voltage: 415 V
• Rated Frequency: 50 Hz
• PLC Configuration: SLC 5/05 Processor / Micrologics 1500
•  : No. of DG Sets Synchronization
• 8: Degree of Protection

Synchronising based on specfifications and drawing on one bus while taking care of all parameters to achieve better communication and trouble-free system.

• Material: Mild Steel
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)
• Voltage: 415V
• Capacity: 50KVA to 2050KVA
• Power Source: Electric

PLC based Instrumentation Panels to offer AMF, Auto Synchronization and Load Sharing functions as per specific requirements of the customers ranging from 2 DG Sets to 6 DG sets with Man Machine Interface and SCADA system.  

• Material: CRCA( Cold Rolled Close Annealed)
• Brand Name: Pee Kay Silent Generators Pvt. Ltd.
• Frequency: 50-60 Hz
• Usage/Application: Industrial/ Home
• IP Rating: IP 42/ IP 44
• Phase Type: 3 - Phase

Synchronizing Panel works between two or more different power sources like DG sets to manage power supply. Synchronization helps in making different DG sets behave as a virtual single unit and eliminates subdivision of total load. It helps in transferring load from one unit to another as during service period, so that the unit requiring service can be easily shut off. In this way the critical load need not be interrupted and there is no production loss. During low load we can run any single unit, and synchronize more units as the load increases. This can be manual or automatic.

Synchronizing as we know is important from the point of view that how loads sharing between different unit's takes place and load transfer during the maintenance is important. Panels require two or more different sources of power likewise between DG SETS and the main GRID.Synchronizaing panel is used where one DG set synchronizing with two or more DG set when mains fail all DG start at a time but after some time one will be on & other will be stop as per load demand .When load increased above 70% of the total load the 2nd dg will be start & it synchronies with first one & total load was distributed equally On that two DG set & this process will go on. During low load we can run any single unit, and synchronize more units as the load increases. This can be manual or automatic.   Specifications To be operated In parallel are fast/reliable Synchronizing & precise KW Load sharing Inbuilt protections for engine,generators & Mains like over current,overload,earth fault Reverse power,over/under voltage,low oil pressure,high water temp Over speed & SYNC CHECK, AMF and GRID paralleling is possible with import/export control PLC for system logic configurable input/ output as per requirement Features Highly performance Easy operation Easy to install Low maintenance cost

• Feature: Anti-corrosive, Durability, Optimized design
• Application: Generators
• Phase: Three Phase
• Frequency: 50 Hz
• Material: Aluminium
• Voltage: 240V
• Power Source: Electric

• Brand Name: Zedelec
• Power Source: Electrical
• Type: AC Three Phase
• Usage/Application: Generator
• Rated Power: 10-1500KVA

• Power: 2600 kVA
• Usage/Application: For Generator Synchronisation
• Brand Name: OVN
• Material: Mild Steel
• Frequency: 65 Hz
• IP Rating: IP 65
• Phase Type: Single Phase
• Panel Type: Synchronization Panel

• Material: Mild Steel
• Voltage: 440VAC
• Phase: Three Phase
• Capacity: 12 KVA
• Current: 16-32A
• Usage/Application: Spinning Mills, Cement Plant, Domestic Applications, Solar etc.
• IP Ratiing: IP 54
• Shape: Rectangular

We are considered as a significant manufacturer, supplier, and exporter of DG Synchronizing Panels. Our DG Synchronizing Panel is fabricated with a superior quality of raw materials, metals, and other components. The production process is carried out, under the rigorous vigilance of a dexterous team. Our DG Synchronizing Panels are easy to install and operate.

Our range of Load Sharing and Synchronizing Panels are manufactured by using high quality raw materials. These can be availed from us at the industry leading prices. These panels synchronize the different DG sets as per the load requirement of the system. If the load increases, it switches on the other DG sets on by one and synchronizes with the system automatically through PLT (Panel Logic Control) and when the load decreases below the desired level, it automatically disconnects the DG sets one by one and switches off as per the load requirement.              

Ambit provides innovative solution for power management, synchronization and control for Diesel Generation (DG) sets, turbines grid with DGTG sets used in small, medium & large Industries, Building & Commercial Infrastructure segment that includes Offices, IT IT ES Parks, commercial complexes, shopping malls, Hotels & Hospitals.

DG Synchronization Panels, PCC Panels, MCC Panels, Bus Ducts

Synchronization Panel, POWER CONTROL CENTERS, Plc Panels

DG Synchronization Panel, PCC Panel, Busduct, ACB Panel