Tapping Attachments Dealers in Delhi

Are suitable for use with standard taps on any drilling machine or lathe, vertically or horizontally for right or left hand tapping of blind or thru holes. Have adjustable friction-clutch to avoid tap breakage. Have self-centering chuck to hold tap true. Are extremely useful for mass production. Have perfect automatic reverse mechanism with double backout speed. Are made of alloy steel with all moving parts hardened and ground to precision. Have all parts interchangeable and easily replaceable. Batch quantites or mass production of tapping by this attachment could be achieved accurately on existing machine tool, like a drill, without requiring any modifications. Having versatile application in every machine shop they dispense with labourious hand tapping and threading and use of expensive machines. Specifications :- Capacity M2 - M4 116" - 316" M3 - M10 18" - 38" M6 - M16 14" - 58" M8 - M18 516" - 34" M10 - M24 38" - 1" M14 - M30 916" - 1 14" Shank Morse Taper 1 1 or 2 2 or 3 3 3 or 4 4

Handling Instruction for Automatic Tapping AttachmentsThe attachments are suitable for taking machine taps, through also take hand taps up to one size lower than maximum specified . only H.S.S taps are advisable.Lower outer casing of the attachment (guide bush) is kept stationery by means of torque-bar which should be fixed through the hole provided in the guide bush and rested against machine column suitable stay. Depth of tapping should be adjusted on a drill while tapping blind holes of limited depth, by raising the machines spindle the tap automatically reverses at double the tapping speed.Adjustments is made to the clutch to suit the size of tap being used this effected by loosening brass screw and rotating cup nut on tap, thus decreasing or increasing the spring pressure on the clutch. Numbers are etched on the cup nut to help set the unit to the desired position for particular size of tap.It should however be noted that these adjustment numbers are directive only for the required pressure on the clutch depends on various factors like material being tapped, type of threads condition of taps etc.The sliding left and right nuts of the chuck are holdings the tap by gripping on the flats of its square head. after lightly fixing the tap between these nuts tighten lower conical jaws by chuck nut with the help of specially supplied spanner and finally tighten the upper nuts with the help of alien - head spanner also supplied with the unit.Oil nipple for lubrication has been provided in the unit and the unit should thoroughly be lubricated after about every thousand tapping operations.The speed chart should be gnoe through and the correct speed of the drilling machine spindle should be maintained a indicated in the chart. These speeds are only indicative and a slight variation of speed on lower side, if correct speed is not available should be preferred to the higher side. Recommended Tapping Speed For Various Metals These speeds are approx and intended as a general guide only, the most effective speed should be determined by actual test with a given tap, material machine and tapping fluid. the taps usad should be of high - speed - steel.

Tapping Attachments, Model : HR 1, Capacity : 1.4-7mm (116" - 14"), Standard : S161 (2.5-4.5), Optional : S151 (1-2.5), Shank (Female) : JT33, Shank Arbor : JT 33MT1 Or JT-33MT 2.

• Capacity: M2-M4 1/16"-3/16"
• Shank Morse Taper: 1 OR 2

Auto Reversing Tapping Attachment Are suitable for use with standard taps on any drilling machine or lathe, vertically or horizontally for right or left hand tapping of blind or thru holes. Have adjustable friction-clutch to avoid tap breakage. Have perfect automatic reversing mechanism with double pull out speed.

We are offering tapping attachment.tapping attachments for radial drilling machines.

• Processing: Drilling Machine
• Usage: Thread Processing Machine
• Precision: Precision
• Controlling Mode: Other
• Port: Delhi
• Brand Name: BREEZE
• Model Number: BT-10
• Packaging Details: As per order

• HOLDING CUTTER DIA: M3 - M6 (1/8” - 1/4”), M3 - M12 (1/8” - 1/2”), M10 - M20 (3/8” - 3/4”)

A versatile attachment suitable use to drilling machines for drilling thru blind holes with standard taps. The automatic reverse mechanism has a double back out speed and an adjustable friction clutch to avoid tap breakage.

Self Reversing Tapping Attachments is the tool for internal threading .This tool is used where high production rates are to be achieved .The tapping attachments reduces the chances of the tap breakage and can be used on a conventional drilling.

We offer Tapping Attachments. Backed by experienced and expert team we are offering range of Tapping Attachments

tapping attachments, Magnets, Surface Plates, Boring Heads, Rotary Tables

tapping attachments

reversible tapping attachments, Emery Rolls Sheets, Universal Tilting Tables