Tensile Strength Tester Dealers in Delhi

• Load Method: Crosshead movement - constant speed,500 mm/min
• Testing Temperature: Room Temperature
• Test Piece Shape: Dumbbell Shape 500 Kgf 0.05Kgf
• Sample: Rubber Sheet
• Power Required: 220V AC 50 Hz

• Type: Tensile Strength Tester
• Color: Blue and Grey
• Condition: New
• Warranty: Lifetime Buyback Warranty
• Certification: ISO 9001:2008 Certified
• Country of Origin: India
• Brand Name: Paramount

Tensile Strength tester is professionally applicable to measurement of tensile, peeling, tearing, adhesive, pulling force as well as other properties of fabrics ,yarn leas , home textile ,footwear, Leather, plastic films, soft package materials, plastic flexible tube, adhesive tapes, label stickers, protective films, aluminum foils, diaphragms, non-woven fabrics, leather ,rubber and paper, etc. Paramount Tensile Strength Tester i9™ (DIGITAL) is an ergonomically designed advanced equipment which works on the constant rate of elongation (CRE) principle. The sample is held between two jaws, the lower one is a stationary jaw while the other is made to move at a preset speed with the help of special geared motor and advanced programmable electronic drive (speed can be variable from 50 to 400 mm per minute). The load exerted on the movable jaw is sensed by a sensitive sensor connected with load cell which directly indicates the load in digital form in kgf. The result of elongation is indicated directly in digital form (mm) with the help of optical sensor The equipment has an in-built provision for safety arrangement. It has a provision to prevent over travel of the moving jaw. It has an in-built line filter arrangement to check any fluctuations in power supply so that it does not have any effect on the result generated, thereby giving accurate result. The frame of the tester is fabricated from heavy mild steel section to give the rigidity and strength. The exclusive feature of Tensile tester is its control panel that houses all the controls and is very user friendly and easy to operate due to its convenient location .The equipment is finished in special blue & grey powder coated paint. The other parts are made with Stainless-Steel to give a corrosion resistant long life finish.

These are used for testing the tensile strength and expansion of material like cables, wires, conductors, ferrous non- ferrous and packaging material. Further, by using relevant grips and combining correct transverse speeds, tests can be conducted on it and in addition, bending and compression tests can also be conducted on it. The machines are made in different capacities as per ISO, BS, DIN & ASTM standards. These are floor mounted and provide accurate data (accuracy within 1 +) on the physical properties of materials in a very quick and simple manner.

Known for exceptional product basket containing PP Bags Tensile Strength Tester, we are a reliable name in this sphere. We have adopted different payment procedures for the attainment of complete client satisfaction. In online payment procedure, the procedure depends on the processor model or gateway; both of them ensure complete security.   Features : Easy installation Easy to operate Robustly constructed Technical Specifications : Digital Tensile Testing Machine  - 500Kgf with S Type Load Cell Least Count - 0.1Kgf Traverse Speed - 300 & 100mm /min. Max. Grip Separation –1000mm Min. Grip Separation  - 100mm Power - 220 V AC 50 Hz. Drive  - 1H.P. Geared Motor Safety Device  - With Limit Switch to protect from Over Traverse.   Other Details : Approx. Price - Rs 65,000 / Piece

• Brand Name: V2
• Voltage: 210 V
• Material: Stainless Steel
• Display Type: Digital
• Accuracy (%): +/- 0.5%
• Weight: 500 Kgs
• Power Source: Manual
• Test Speed: 1-999 mm/min

• BLUE: BLUE

We are manufacturing wide range of Tensile Testing Machines which is suitable for testing tensile strength and elongation of different various material. Our range is customized as per the specifications of our clients and complies with various industrial standards.

We are supplier of Tensile Strength Tester. Our machines are of best build quality and easy to use. Also it comes with one year Calibration...  

• Load Cpacity: 500kg x 0.05kg(50gm)
• Elongations: 900mm x0.1 mm
• Traverse speed: variable 100 & 300mm/min
• Motor: 1Hp,1425 rpm, induction motor
• Power required: 220 VAC,50Hz,1500 Single phase
• Standards: Astmd 5034,5035,Bs 3320,2576, Iso- 13934-13935

MyQ new Digital Tensile strength tester is helpful to identify tensile strength & elongation of fabrics. In the industrial textile industry, tensile strength typically refers to the strength and elongation properties of the material. Textiles can be tested in many forms, including single strands, yarns, webbing, woven, braided materials and non-woven fabrics.   Most textile fabric tensile testing is performed as either a grab test, to eliminate edge effects, or a strip test, including edge effects. For a grab test, the grips of a testing machine clamp a fabric sample in the center using jaws smaller than the sample width. For a strip test, the grips clamp a strip of fabric using jaws wider than the sample width.   Key Features New updated model with imported motor. Unit changing facility (LOAD)- N,Kn,KG,LBS Unit changing facility (Elongation)- mm,inch,Cm Control – Up, Down, Stop Manual & Computer Both   Test Facility Tensile with elongation test Seam slippage test

• Brand Name: Sisco India
• Country of Origin: Made in India
• Usage/Application: Laboratory
• Material: Stainless Steel
• Display Type: Digital
• Operating Mode: Automatic
• Testing speed: Up to 300 mm/min

• Opening in upper clamp: 30.5 mm diameter
• Opening in lower clamp: 38.1 mm diameter
• Rate of fluid displacement: 95 cc/minute
• Test Fluid: Glycerin
• Pressure range: Range Up to 7-21-28-35 Kg/Cm2 x0.2 Kg/Cm2

Bursting strength of any material such as fabric, leather, paper etc. Is its strength under action of a multidirectional force and is defined as the hydrostatic pressure required producing rupture of the material when pressure is applied on one of its surfaces at a controlled increasing rate through a rubber diaphragm.  

• Type: Tensile Strength Tester Com.
• Application: Strength Testing
• Color: Grey
• Voltage: 220V
• Condition: New
• Automation Grade: Automatic
• Country of Origin: India
• • Capacity : Up to 500 Kgf: • Aaccuracy : 10g to 50g S Type Load Cell fixed with Top Grip
• • Display Unit : N/mm2, kgf/Cm2, Pound: • Maximum Grip Separation : 1000mm
• • Motor : 0.5 hp , Crompton / ABB 220V AC 50 Hz: • Variable Speed : 50 to 500 mm /min

• Model Number: Tensile Strength Tester
• Application: Laboratory
• Color: Blue
• Packaging Type: Wooden Box
• Display Type: Digital
• Operating Mode: Automatic
• Motor: 1/2+H.P single Phase
• Dimension: 60cm X 40cm X 185 Cm
• Weight: 170 Kg
• Capacity of Tester: 0-250kg
• Least Count: 0.1 Kg (100g)
• Speed of the Machine: 100mm/300mm Per/min Speed
• Min Jaw Separation: 30mm
• Elongation display: Digital
• Panel Switches: Push Switches For Load, Unload Stop

We are manufacturers and suppliers of Tensile Strength Testers. It tests the tensile strength of papers and boards. The Tensile Strength Testing equipment is supplied complete with motorised loading arrangement. Mechanical and digital models are available. Printer is also available with digital models. Tensile Strength Testers are made as per ISO standards.

The instrument employs a friction free, accurate, double lever system, the load being applied by means of sliding weight on the top lever. The capacity of the units is 900 kgs. After fixing the briquette in the jaws, the machine is switched on. The sliding weight slides over the calibrated lever thus applying tension to the specimen. A micro switch fitted instantly stop the machine on failure of the briquette and on failure the tensile load is accurately 0.5kg. By means of a marker provided on the sliding weight to its zero position. Suitable for operation on 230 V, 50 cycles, Single Phase, A.C. supply. Supplied complete with one brass briquette mould and one base plate.

We manufacture and supply a wide range of Tensile Strength Tester machine which is used to determine the tensile strength and elongation of various raw materials. Our range of Tensile Strength Tester is widely accepted by most of the industries for its accurate results and higher efficiency. Clients can avail from us our range of Tensile Strength Tester at highly affordable prices. Features Precision engineered Very durable High performance Robust construction Easy to install Applications Rubber Leather Fabric plastics Belt wires Rods Ropes Yarns belts etc.

SALIENT FEATURE: Loading accuracy: As high as + 1 %Speeds: Straining at variable speeds to suit wide range of materialsFacilities for tests: Motor-driven threaded columns forquick and convenientadjustment of lower crosshead to facilitate rapid fixing of test specimen.Autographic recorder: Simultaneous roll autographic recordersupplied as standardto enable study of the behaviors of materials.Ideal Dia: High reading accuracy due to large size ideal design of dial.Large columns: Large effective clearance between columnsenables testing of standardspecimen as well as structures.Easy changeability: Easy change from plain to threaded andscrewed specimensSimple & Safe: Simple to operate.Robust constructionChrome planted metal componentsWide range of standard and special attachmentsaccessories available.

• Weigth: 50kg., 100kg. 150kg. and 200 kg.
• Tensile tests: upto 1200 Lbs or 540 kg
• Model: ASI-214
• Spares: Lead shots & Briquette mould brass with base plate.
• Use: for making tensile strength test on cement briquettes.

Upto 500 kg. Capacity with 3 subclass. Grips of different sizes available. Can be used for lea strength (yarn) also.