Testing Apparatus Dealers in Inderlok, Delhi

The company is primarily engaged in the manufacturing, exporting, and supplying the highest-grade marshall apparatus in all across the globe. Our marshall apparatus is highly acclaimed by the national as well as international clients, for their excellent efficiency and working life. The marshall apparatus can be availed at the most competitive prices from us. description marshall load frame cap 50kn speed-50.8mm/min : 1 nobreaking head stability mould : 1 nocompaction mould steel, cylindrical : 3 nobase plate : 3 noextension collar : 3 nocompaction pedestal & manual operation, comprising steel : 1 noplate capped on a wooden post. A mould clamp is hutted to the top of the platecompaction hammer for use with compaction pedestal and 2 no. Mould, weight 4.5kg with a free fall of 457mmload transfer bar : 1 no

he fineness of cement has a significant effect in its physical properties when used in concrete. Generally the finer the cement powder, the more rapid the concrete will set, as there is an increase in its surface area. The measure of fineness is usually undertaken by sieving, and the result assessed against the cement standard for compliance. The Blaine air permeability apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The Blaine apparatus draws a defined volume of air through a prepared bed of cement of defined porosity. The apparatus comprises one each of Brass or stainless steel permeability cell 12.5mm,’U’ tube manometer with stop cock mounted on a laminated wooden stand, perforated metal disc, plunger, Rubber stopper, Rubber tube – 30cm long with rubber bulb. Optional AccessoriesAt extra cost Balance with 0.001 gm resolution Stop Watch with 0.5-second resolution Manometer Liquid Whatman Filter Paper Filter Punch

• Weight: 40-50kg
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant
• Material: Metal

Standard Compaction Test apparatus consists one each of compaction mould steel, 100 mm I.D. x 127.3mm height x 1000 cc. volume, complete with collar and base plate. Compaction Rammer is 2.6 kg in weight x 310mm controlled fall.

Unconfined Compression Testing Apparatus can be used either in a Laboratory or in field. This apparatus is as per the design of Building Research Station, U.K.Consists of a spring operated load frame with arrangements for loading 38mm x 76mm samples, one set of four load springs of stiffness 0.2kg, o.4kg, 0.8kg and 1.6kgmm, a calibrated mask and one set of 50 charts, in a metal carrying case. Spares & Accessories: Charts set of 50 Calibrated mask. Spring set comprising one each of stiffness 2Nmm, 4Nmm, 8Nmm and 16Nmm Coning toll for 38mm sample (female) Coning toll for 38 mm sample (male) Tripod stand wooden, for using the instrument in field.

We manufacture superior quality Marshall Stability Test Apparatus for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous pouring mixture loaded on the lateral surface. Our Marshall Stability Test Apparatus is made of superior quality raw materials and equipment that make it highly useful in various sectors. The Apparatus is precision engineered to work with perfection. We custom manufacture Marshall Stability Test Apparatus as per the specifications of the clients. Working This is for use with hot mixture containing asphalt or tarAggregate up to 25 mm maximum size Attributes Accurate constructionCustom manufacturedEasy operational featuresOffer test results with perfection The equipment comprises of following Three specimens cylindrical mould 100 mm diametermeterThree base platesThree collars 100 mm diametermeterTwo compaction hammers, 10 lbs. Weight, with 45 cm dropOne specimen extractorOne compaction pedestal complete with specimen holderOne breaking head assembly. Complete with diameterl micrometer and bracket for flow measurementOne load transfer barOne loading unit, motorized, with travel of 50 mm/min and fitted with motor, reversing switch and limit switches to restrict the travel. Fitted with hand wheel for finer adjustment to bring the proving ring in contact with breaking head assembly, capable of application of loads up to 5000 kg. Suitable for operation from Main supply 230 volts, 50 cycles, single phase, A.C.Proving ring of 5000 kg (50 K.N.)Diameterl gauge .01 mm x 25 mm travel

• Dial Gauge:: 0.01 x 25 mm
• Material:: Stainless steel
• voltage:: 220V , 50Hz
• Usage:: Soil test
• Pressure Assembly:: 10 kg./cm2
• Power:: 0.75kW

Our Triaxial Shear Test Apparatus has high quality machines which guarantee long working life. With the assistance of our secure payment procedures including both Online and Offline Payment Processing, we are able to ensure safety of the payments with us. We are committed towards providing the world-class lot of products thus, check each and every product on different levels.

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

This apparatus is designed to meet the test standards UL, BAEV and IS to check “Cut IN” and “Cut OUT” characteristics of bi-metal type thermostats The test bath consist of following :- > Continuously variable temperature WaterOil bath. > PID featured temperature profiler to maintain temperature curve > Audio visual indication for Cut IN and Cut OFF of the thermostats If required we can also provide Data Logger to record the temperature readings of the thermostats.

• Color: Blue
• Material: Cast Iron
• Country of Origin: Made in India
• Usage/Application: Construction
• Height: 30 cm
• Finishing: Color Coated
• Top Diameter: 10 mm
• Features: Robust construction, Negligible maintenance, Corrosion resistance

• Used: for the determination of the consistency of freshly mixed concrete .
• graduated Steel Rod: 16mm dia. x 600mm long
• Height: 30cm
• Internal Dia. Base: 20cm

500 kN (50 Tonnes) Consists of following: Hydraulic Centre Hole Jack 500kN (50 Tonnes) capacity with 54mm Centre Hole, 150 mm Ram Travel, Double Acting Hand Operated, two stage Pump Thermoplastic Hose 6m long with pair of quick couplings Load Gauge 150mm dia, 500kN x 5KN Reaction Frame 500kN capacity with 90mm hole at base High Strength Test Rod 40mm dia. High Strength Coupling, Having RH thread to suit Test Rod on one end and LH to suit 32 mm dia. Rockbolt on the other end. Dial Gauge 0.01 x 25 mm

The fineness of cement has a significant effect in its physical properties when used in concrete. Generally the finer the cement powder, the more rapid the concrete will set, as there is an increase in its surface area. The measure of fineness is usually undertaken by sieving, and the result assessed against the cement standard for compliance. The Blaine air permeability apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The Blaine apparatus draws a defined volume of air through a prepared bed of cement of defined porosity. The apparatus comprises one each of Brass or stainless steel permeability cell 12.5mm,'U' tube manometer with stop cock mounted on a laminated wooden stand, perforated metal disc, plunger, Rubber stopper, Rubber tube - 30cm long with rubber bulb. Balance with 0.001 gm resolution Stop Watch with 0.5 second resolution Manometer Liquid Whatman Filter Paper Filter Punch

• Application: ETP, STP, R&D laboratory, Hotel Industry, Industrial Complexes, Water Research Industry
• Power: 220 v ac supply, 50 Hz, 100 W
• Temperature: 35 oC
• Features: Finds usage as Laboratory mixing and stirring equipment, Efficient and Economical handling of Flocculation matter, Correct estimation of dosing of alum and other coagulants
• Speed range: 2 to 250 RPM (Made available in variable speed control)
• Pre-set programs: 2
• Timer: Digital timer supports – 0 to 99 minutes
• Controls Keypad: Touch-sensitive
• Digital Display: LED, digital rpm indicator support
• Accuracy: +/-  2 RPM
• Size: Standard and Customized
• Body: Powder-coated body finish
• No. of Jar : 2, 4, 6

We manufacturer, Supplier & Exporter of Asphalt Ductility Testing Apparatus. In flexible pavement construction, bitumen binders are used. It is important that bituminous material forms ductile thin film around the aggregates, which serves as a binder. The binder material not of sufficient ductility renderspervious pavement surface and leads to development of cracks. Therefore it is important to carry out the ductility tests on bitumenous material.

• temp.: 200°C ±0.5°C.

SIGMA Thermal Stability Test Apparatus is used to measure check Thermal stability of PVC insulation & sheath of Electric cables as per IS:5831. Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a PID controlled heating chamber at specified temp. of 200°C ±0.5°C.

• Capacity: 108 Liters
• Test Types: NSS + CASS Test
• Temperature Uniformity: ≤ ± 2°C

Whether you are new to corrosion atmosphere testing or have been conducting testing for years, we present Salt spray chambers or Salt Fog Chambers that are not only easy to use and maintain but also provide the accuracy and flexibility necessary to meet today's demanding corrosion test procedures including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. These machines create three types of manually adjusted environment; salt spray, high humidity and air drying at any given temperature within the chamber. Any combination of these environments can be programmed, in any order, to form a corrosion cycle. Such a corrosion cycle can be automatically repeated a predetermined number of times. Our models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS), Seawater Acidified Test (SWAAT) or Cupric Acid (CASS). Models above 480 Liters of capacity are ideal for Cyclic Corrosion Cabinet (Cyclic Corrosion Chamber). In Laboratories corrosion tests are used extensively for selection of materials and their surface protection. Our Corrosion box chambers are what you need to predict corrosion resistance of materials such as paints and coatings and are designed and developed to meet the widest possible range of industry standards:

We are offering bitumen testing equipment. Bitumen is the ingredient in constructing and it is essential to enhance strength. Bitumen testing equipment such as bitumen testing machine, ring & ball (softening point) test apparatus, ductility testing machine, standard tar viscometer, bitumen laboratory mixer etc. Every testing equipment is designed & manufactured with great level of precisely to meet requirements of different industries and their respective testing methods bitumen in particular is a mixture of organic liquids which are highly viscous, black, sticky, entirely soluble in carbon disulphide. This material is composed of highly condensed polycyclic aromatic hydrocarbons. For testing this bitumen on varied parameters.

Laboratory CBR Test Apparatus, Laboratory Shrinkage Bar Mould, Proctor Mould

Bitumen Testing Machine, Soil Testing Equipment, Concrete Testing Equipment

SPIC Hot Deformation Test apparatus, ABT Meter

bitumen testing equipment, automatic soil compactor

toxicity test apparatus, Halogen Acid Gas Test Apparatus

CBR Test Apparatus Field Type, Material Testing Equipments

Thermal Stability Test Apparatus, Hand Hold Flammable Gas Detector

Thermal Stability Test Apparatus, Sigma Digital Earth Resistance Tester