Testing Apparatus Dealers in Karol Bagh, Delhi

The firm is known for building efficient apparatus for carrying out the Marshall Stability Test. The Marshall Stability Test Apparatus is applicable to hot mix designs by availing bitumen and aggregates. In this procedure, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is calculated when the same is loaded at periphery at 5 cm per min. The two prime features of the Marshall method of designing mixes are Density : Voids AnalysisStability : Flow Tests This test method is used in the design and evaluation of bituminous paving mixes. The test method is widely used in routine test programmers for paving works. Specifications A loading unit motorized, capacity 5000kgf with two telescopic pillars and an adjustable cross head. The Limit switches are attached inside to regulate the upward or downward movement of the pillars. On off reversing switch and indicator lamps are on the front side while a hand wheel to manually displace the pillars is on the right side. The load frame has fixed speed of 5.80cm per minute, which is operated on 230 volts AC3 Specimen mold 10.16cm I.D. x 7.6cm high with base plate and extension collarOne Kit for specimen extraction that consists of one each load transfer bar, steel ball and specimen extracting plateOne number compaction pedal with specimen mold holder1 Breaking head assembly with provision to fix flow meterThe Marshal Stability of mix can be defined as a maximum load carried by a compacted specimen at a standard test temperature of 60oC

• Material: Steel, Granite
• Size: 38 mm
• Resolution: 0.001 mm

We are instrumental in offering our clients an exquisite range of corrosion test apparatus. The products are fabricated by the proper utilization of high quality raw materials, that are procured from the most reliable vendors present in the market. Apart from this, the offered product range is available to the clients at the most market leading price range. features: high performance seamless finish precisely-engineered cost-effective optimality.

Product Code: EKE 895This test is performed to measure the short-term strength of an installed Rockbolt under field conditions. The strength is measured by a pull test in which bolt head displacement is measured as a function of applied bolt load to give a load- displacement curve. This test is usually employed to assess the performance of the Rockbolt anchor resulting out of the quality of material used for manufacture of Rockbolt and installation method used. The test equipment consists of a manually operated hydraulic pump connected to hydraulic jack, having a high strength test rod, coupled to the Rockbolt under test. The anchor is tested by measuring the load until a total displacement greater than 40 mm has been recorded or until the bolt yield or fractures, if this occurs first. The readings of displacement are taken in increments of approx. 5 kN load or 5 mm displacement whichever occurs first. The rate of load application should be in the range 5- 1 0 kN/min. Readings are only taken after both load and displacement have stabilised. The time required for stabilisation should be recordedDetails Pullout Test Apparatus 500 kN (50 Tonnes) Consists of following: EKE 89001 Hydraulic Centre Hole Jack 500 kN (50 Tonnes) capacity with 54 mm Centre Hole, 150 mm Ram Travel, Double Acting EKE 89005 Hand Operated, two Stage Pump EKE 89007 Thermoplastic Hose, 6m long. with pair of quick couplings EKE 89010 Load Gauge 150 mm dia, 500 kN x 5 kN EKE 89011 Reaction Frame 500 kN capacity with 90mm hole at base EKE 89012 High Strength Test Rod, 40 mm dia EKE 89015 High Strength Coupling, having RH thread to suit Test Rod on one end and LH thread to suit 20mm dia Rockbolt on the other end EKE 89016 High Strength Coupling, having RH thread to suit Test Rod on one end and LH thread to suit 25mm dia Rockbolt on the other end EKE 89017 High Strength Coupling, having RH thread to suit Test Rod on one end and LH thread to suit 30mm dia Rockbolt on the other end EKE 89018 High Strength Coupling, having RH thread to suit Test Rod on one end and LH thread to suit 32mm dia Rockbolt on the other end EKE 072- Dial Gauge, 0.01 x 25 mm

• Automation Grade: Semi Automatic
• Brand Name: Steco
• Material: Mild Steel
• Application: Ductility Testing
• Power: 0.25 To 4 Kw
• Frequency: 50/60 hz
• Standard: ASTMD113

We have adopted secure payment methods that are approved by authority and featured with options that facilitate quick transfers. Established in Delhi(India), our organization has been effective in taking over the local and domestic marketplaces as distributor of the product. We supply finest quality of Slump Test Apparatus, which has internal dimensions ranging from 20*10*30 cm.

California Bearing Ratio Test Apparatus is used to determine the relative bearing ratio and expansion characteristics of sub-grade soils for the construction of roads and pavements. We are one of the leading Manufacturers, Suppliers and Exporters of California Bearing Ratio Test Apparatus from Delhi, India. Our California Bearing Ratio Test Apparatus is of high quality and ideal for different types of soils like, sand, gravel and washed stone.   The Apparatus Consists Of : Load Frame, 50kn ( 5000 kgf) Capacity, 3 Speeds Mould 150mm ID x 175mm high Perforated Base Plate Extension Collar, 150mm ID x 50mm high Penetration Piston, 50mm face dia Adjustable Bracket, for Penetration Dial Gauge circular Metal Spacer Disc. With detachable handle, 148 mm dia x 47.7 mm high time. Annular Metal Weight, 2.5kg, 147mm dia with 53 mm dia central hole  Perforated Metal Weight 2.5 kg. 147mm dia, with 53mm dia soft Perforated Plate, 148mm dia, with adjustable stem and lock nut Metal Tripod for Dial Gauge Cutting Collar Rammer 2.6kg, 310mm controlled drop Rammer 4.9kg, 450mm controlled drop Proving Ring Capacity 50 KN Dial Gauge, 25 mm travel, 0.01mm least count Multitech

The disintegration test is performed on the tablets by moving them up and down in water kept at 37°C. Built in a MS cabinet which houses a geared motor that moves the vertical shaft up and down by 7.5 cms at a speed of 30 dips per minute. On the upper end of the shaft is fillted a horizontal strip with a clamp. This clamp holds a glass vessel open at both ends with SS wire gauge and rubber rings at the lower end. This glass vessel dips in water when the instrument starts working. A thermostatically controlled hot plate is fitted on top of the cabinet. It holds a glass beaker of 1000ml filled with water. Temperature is maintained at 37°C. Available in single and double basket.  

Product Code: EKE 243   EKE 24201 Rounded Beads, made of glass, size 0.85 mm (passing 1 mm and retained at 0.85 mm)EKE 24202 Rounded Beads, made of glass, size 0.425 mm (passing 0.85 mm and retained at 0.425 mm)EKE 24203 Rounded Beads, made of glass, size 0.25 mm (passing 0.425 mm and retained at 0.25 mm)EKE 24204 Rounded Beads, made of glass, size 0.18 mm (passing 0.25 mm and retained at 0.18 mm)EKE 24205 Rounded Beads, made of glass, size 0.15 mm (passing 0.18 mm and retained at 0.15 mm)EKE 24206 Rounded Beads, made of glass, size 0.075 mm (passing 0.15 mm and retained at 0.075 mm)AccessoryEKE 24301 Spare Drum   Soil reinforcement is a recent and fast developing technique to improve soil behaviour for a variety of civil engineering works; e.g. earth retaining structures, slope stability, land slides protection works, pavement, etc.In order to utilise fully the strength of reinforcement material while transferring load and forces via soil or aggregate to the reinforcement, a correct assessment of the soil/reinforcement frictional relationship is essential. The frictional properties can be assessed by means of a shear box which is modified either to conduct a 'Modified Shear Test' or 'Pullout Test'. In the former test, reinforcement material is placed and clamped in the plane of shear with soil above the fabric, whereas in the later test, the fabric placed between the top and bottom shear boxes is covered on both sides with soil and is then pulled out to evaluate the frictional resistance. This interface friction measurement apparatus has been specially designed to evaluate both 'frictional' as well as 'pull out resistance' of soil reinforcing materials at a shear rate and drainage condition desired by the designer. The percentage passing of different fractions determines the porometry of the geotextile investigated. In the Hydrodynamic Sieving Method, the geotextile specimen, loaded with a certain quantity of glass bead fraction, is continuously rotated in a water trough, forcing the glass beads to pass through the geotextile openings. The apparatus consists of two test drums of 14 cm dia and 7 cm effective length with 16 nos. of 4 mm dia rods provided circumferentially at equal spacing to hold the geotextile specimen in position. Two troughs to contain the test drums are supported onhorizontal axis, facilitating free rotation and capable of being filled with distilled water to a level of 20 mm below the drum axis. The clearance between the trough and the geotextile could be maintained at about 40 mm.The apparatus is provided with a motor drive and a change gear assembly to enable rotation of the drums at a speed of 5 rpm to 30 rpm.For conducting the test, the geotextile specimen is cut and stitched to get a shape of 14 cm dia and 10 cm length to insert over the drum tightly, after immersing the specimen in distilled water for one hour, and secured by rubber 'O’ rings. After placing 50g of smallest size glass beads inside the drum, the lid is secured and the drum with the geotextile placed in distilled water to the desired level and rotated at 20 rpm for 1,500 cycles. In order to get the optimum filtration opening size, the drum is rotated at a speed of 5 rmp to 30 rpm for 250 to 2,500 revolutions. The percentage of beads passed through the geotextile by dry weight is determined. The test is repeated with increasing size of glass beads till less than 5% of the beads by weight pass through the geotextile.

Designed to test three specimens simultaneously. The machine consists of a carriage moving over a lead screw. An electric motor driven reduction gear unit ensures smooth constant speed and continuous operation. The entire assembly is mounted with a stainless steel lined water bath completely encased in metal bound hardwood. It is equipped with an electric pump circulator and heater. The temperature is controlled thermostatically. Two rates of travel i.e. 50 mm/min and 10 mm/min are provided. Suitable for operation on 230 V, 50 Hz, Single Phase, A.C. supply.   Complete With: 1. Ductility Mould, with Base Plate 3 Nos.2. Thermometer IP 38° C, Range: 23° C to 27° C

Avail from us a distinct variety of Water Testing Apparatus that is manufactured from quality components. The Water Testing Apparatus that we Manufacture and Supply is highly demanded for the efficient testing of water. This Water Testing Apparatus tests water on various quality parameters such as salinity.

Thermal Stability Test Apparatus is used to measure/ check Thermal stability of PVC insulation & sheath of Electric cables as per IS:5831.Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a thermostatically controlled heating chamber at specified temp. of 200°C ±0.5°C.New Model incorporates a specially designed heating block which eliminated use of expensive silicone oil as in a conventional model.

KEWIL Ring and Ball Apparatus Ring and ball apparatus is meant for determining soft point of bitumen. Using various scientific principles it is also used in petroleum industry, construction projects, paint industry etc. The ring & ball apparatus is used to determine the temperature at which a sample of bituminous material loaded by a steel ball of 9.5 mm diameter, drops a specified distance when heated under specified conditions. It is used to determine softening point of bitumen.

• Type: Bitumen Testing Machine
• Certification: Iso 9001:2008
• Weight: 100-500kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Automatic Grade: Automatic
• Power: 3-5kw, 5-7kw
• Driven Type: Electric
• Warrenty: 1 Year

• Housing Material ::  
• CRC/ MS sheet duly powder coated: Power Consumption :
•  : 220/230V AC supply 50Hz Single Phase
• Motor ::  
• 1/20HP motor good quality: Optional :
•  : Digital RPM meter/ Timer/ DC-Drive for low RPM (On Request)
• Illumination ::  

Designed for Floc formation Test in water treatment plant. Uniform Stirring of up to 6 samples simultaneously Variable speed 20-100 RPM Heavy duty 1/20HP motor with gear train mounted on a mild steel housing Supported by four rods on a bench. Stainless steel stirring paddlers with Adjustable height. Locking collars or stirring rods permit adjustment height of paddle height. Spacing of 6” (150mm) between rod permit use up to 1000ml Beaker. Applications : For Medical Institute Research Lab. & College, Water Treatment Plant

Loading Unit, maximum capacity 20 kg/cm2 consisting of a loading yoke connected to a lever arm with a counter- balancing adjustment and having a lever ratio of 1:10, the whole assembly being mounted on a steel frame stand. ·         Consolidation cell assembly, fixed ring type for testing 60 mm dia x 20 mm thick specimens comprising: ·         Fixed ring for specimens 60 mm dia x 20 mm thick with a guide ring. ·         Top porous stone for 60 mm dia specimen. ·         Bottom porous stone for 60 mm dia specimen. ·         Pressure pad, perforated ·         Channeled base with water inlet. ·         Gasket. ·         Flanged water jacket, ·         Set of weights to give a pressure of 10 kg/cm2 on 60 mm specimen. Comprising: 7 off 0.05 kg/cm2, 5 off 0.1 kg/cm2, 6 off 0.2 kg/cm2, 6 off 0.5 kg/cm2, and 5 off 1.0 kg/cm2. ·         Water reservoir with plastic tube, T-connection and pinch cock. ·         Dial gauge, 0.01 mm x 25 mm travel

• Tamping Bar: 380 mm
• Dia top: 10 cm
• Height: 30 cm
• Tamping rod dimensions: 16*600 mm

• Dibutylphthalate liquid Quantity: 500 gram bottle

Our company is engaged in manufacturing and supplying a wide range of Air Permeability Apparatus, which is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. It includes spares such consistency plunger, initial needle and final needle.

  The Blaine air permeability apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The Blaine apparatus draws a defined volume of air through a prepared bed of cement of defined porosity. We manufacturer, Supplier & Exporter of Blain Air Permeability Apparatus from india. Due to its high quality and features Blain Air Permeability Apparatus is highly demanded in the market.

Bitumen forms the chief ingredient for constructing a range of infrastructures, and efforts are made forever to enhance its strength. There are scores of bitumen testing equipments which carry out the job effectively. S.S.International endows its clients with some of the technically superior bitumen testing Instruments. Such equipments have been offered to meet up the requirements and needs of different industries for tests of varied products. We enjoy a competitive edge over the other market players on the basis of our ability to offer the customized products to a vast range of customers. Manual Pentameter, Digital Pentameter, Ductility Apparatus, heating oven, Kinetic viscosity bath, Flash Fire Point, Fross breaking Test Apparatus and Ring and Bell Test Apparatus are some of the bitumen testing equipments we provide to our clients.

Friability Test Apparatus : (1370) Used to determine the durability and abrasivness of tablets. A transparent perpex drum (made of imported perspex sheet 6.4 mm thick) 300mm dia x 35mm deep and white cover disc and nut, also a shaped radial fixed blade which carries the tablets along with it up to the central height and lets them off while the drum is rotating. Thus the tablets rub against each other without any hard impact. The drum rotates at a fixed speed of 30 RPM by a geared motor and the rotation period is controlled by a timer (imported time switch duration 1 to 15 minutes) per determined end preset. The motor unit is housed in a shaped steel cabinet with shaft extended on one side upon which the drum rotates. Switches with neon indicators and time switch are fitted on a panel and provided work on 220 volts 50C/s AC . Digital models also available.

We are offering flammability test apparatus. The flame-retardant characteristics of electric cables depends upon, raw material used during manufacture, design & external circumstances.several tests have been designed to determine the flammability of the material used in cable or even the fire properties of bunch of cables.

industrial electric ovens, Ultrasonic Bath, hplc column oven, Bod Monitor

We are leading supplier of huge range of Salt Spray Test Apparatus.

Test Sieves

Concrete Permeability Test Apparatus, Standard Spatula, Pycnometer Apparatus

Bitumen Testing Machine, Soil Testing Equipment, Concrete Testing Equipment