Testing Apparatus Dealers in Model Basti, Delhi

• Application: Industrial
• Automation Grade: Semi Automatic
• Brand Name: Steco
• Manometer: U Tube
• Stainless steel permeability cell: 12.5 mm

We have adopted secure payment methods that are approved by authority and featured with options that facilitate quick transfers. Established in Delhi(India), our organization has been effective in taking over the local and domestic marketplaces as distributor of the product. We supply finest quality of Slump Test Apparatus, which has internal dimensions ranging from 20*10*30 cm.

We manufacturer, Supplier & Exporter of Asphalt Ductility Testing Apparatus. In flexible pavement construction, bitumen binders are used. It is important that bituminous material forms ductile thin film around the aggregates, which serves as a binder. The binder material not of sufficient ductility renderspervious pavement surface and leads to development of cracks. Therefore it is important to carry out the ductility tests on bitumenous material.

The firm is known for building efficient apparatus for carrying out the Marshall Stability Test. The Marshall Stability Test Apparatus is applicable to hot mix designs by availing bitumen and aggregates. In this procedure, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is calculated when the same is loaded at periphery at 5 cm per min. The two prime features of the Marshall method of designing mixes are Density : Voids AnalysisStability : Flow Tests This test method is used in the design and evaluation of bituminous paving mixes. The test method is widely used in routine test programmers for paving works. Specifications A loading unit motorized, capacity 5000kgf with two telescopic pillars and an adjustable cross head. The Limit switches are attached inside to regulate the upward or downward movement of the pillars. On off reversing switch and indicator lamps are on the front side while a hand wheel to manually displace the pillars is on the right side. The load frame has fixed speed of 5.80cm per minute, which is operated on 230 volts AC3 Specimen mold 10.16cm I.D. x 7.6cm high with base plate and extension collarOne Kit for specimen extraction that consists of one each load transfer bar, steel ball and specimen extracting plateOne number compaction pedal with specimen mold holder1 Breaking head assembly with provision to fix flow meterThe Marshal Stability of mix can be defined as a maximum load carried by a compacted specimen at a standard test temperature of 60oC

The test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bitumenous mixture is measured when the same is loaded at periphery at 5 cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmes for paving jobs. There are two major features of the Marshall method of designing mixes namely, a) Density – voids analysis b) Stability – flow tests. The marshall stability of mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60ºC. The flow value is deformation the marshall test specimen under goes during the loading upto the maximum load, 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity.The apparatus consists of :1) A loading unit motorized, capacity 5000kgf with two telescopic pillars and an adjustable cross head. Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. The load frame has fixed speed of 5.08cm per minute. Operated on 230 Volts A.C.2) 1 No. Compaction pedal with specimen mould holder.3) 2 Nos. Compaction Rammers, 4.5kg weight and free fall 45.7cm.4) 1 No. Breaking head assembly with provision to fix flowmeter.5) 3 Nos. Specimen mould 10.16cm I.D. x 7.6cm high with base plate and extension collar.6) 1 No. Kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting plate.Accessories :(a) Integral type Proving Ring capacity 3000 kgs.(b) A dial gauge 0.01 x 25mm(c) Universal Water Bath S.S. with false bottom and pyramid shaped lid to accomodates 3 Nos. marshall specimen(d) Thermometer 0 - 250ºC x 1ºC

This instrument is used for determination and checking of bitumen percentage in bituminous mix, the mix is added with a solvent and dissolved bitumen is removed by centrifugal action.

Unique design of ventilation keeps the surface of the instruments from being Burnt even when the instruments i.e. Oven Temperature maintained at 200°C, Kanthal A-1 Super quality coil shaped & Air heater tubular model wound on sideon the back of the Oven for better accuracy, Toughened Glass view window to observe Test the material without disturbing the Temperature condition of the chamber.

• Tamping Bar: 380 mm
• Dia top: 10 cm
• Height: 30 cm
• Tamping rod dimensions: 16*600 mm

Bitumen binders are used in flexible pavement construction. It is important for bituminous material to form ductile thin film around the aggregates, which serves as a binder. If the binder material does not have sufficient ductility, it leads to spurious pavement surface and leads to development of cracks. Therefore it is extremely important to carry out the ductility test on bituminous material. Ductility is defined as distance in centimeters to which a standard briquette of bitumen can be stretched before the thread breaks.The briquette is stretched at a rate of 50 mm min. +2.5 mm per minute at a temperature of 27ºC +0.5ºC.

• Dibutylphthalate liquid Quantity: 500 gram bottle

Our company is engaged in manufacturing and supplying a wide range of Air Permeability Apparatus, which is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. It includes spares such consistency plunger, initial needle and final needle.

• Type: Bitumen Testing Machine
• Certification: Iso 9001:2008
• Weight: 100-500kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Automatic Grade: Automatic
• Power: 3-5kw, 5-7kw
• Driven Type: Electric
• Warrenty: 1 Year

This is for estimating the bearing capacity of shallow foundations in situ and for the design of flexible pavement. In the test procedure a steel plate is subjected to gradually increasing load and settlements of the plates recorded 50 tonne hydraulic jack with separate pumping unit fixed to it a 0 - 500KN x 0.5KN. 1No. Pressure gauge and flexible metal pipe 5 mtr. long 1No.Special ball and socket arrangement between the jack and the bearing plate 1 No.Extension rod 12mm dia x 25 cm long for taking dial gauge readings 16 Nos.Magnetic base with female thread on top for holding extension rod 4 Nos.Top end plate, 50mm, dia with male thread for fitting onto the extension rods and positioning the dial gauge plunger 4 Nos.Column 15cm dia x 25cm long with flanges complete with four bolts and nuts 2 Nos.Column 15cm dia x 50cm long with flanges complete with four bolts and nuts 1 No.Bridge support of welded steel angle construction, 5 mtr. Span and stands approximately 30 cm. High. Fitted with two quick release clamps a for positioning and holding the dial bracket 2 Nos.Plane M.S. plate 60cms x 60cm .Square x 60 cms. Square x 25mm thick.Plane M.S. plate 45cm x 45cm x square x 25mm thick.Plane M.S. plate 30 cms x 30 cms x 25mmthick. Dial Gauge 0.01mm x 25mm - 4 Nos.   Accessories: Plane M.S. 75mm x 25mm thick Plane M.S. 50cm x 25mm thick Grooved M.S. plate 60cms x 60cms x 25mm thick Grooved M.S. plate 45cms x 45cms x 25mm thick Grooved M.S. plate 30cms x 30cms x 25mm thick Grooved M.S. plate 75cms x 75cms x 25mm thick

The fineness of cement has a significant effect in its physical properties when used in concrete. Generally the finer the cement powder, the more rapid the concrete will set, as there is an increase in its surface area. The measure of fineness is usually undertaken by sieving, and the result assessed against the cement standard for compliance. The Blaine air permeability apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The Blaine apparatus draws a defined volume of air through a prepared bed of cement of defined porosity. The apparatus comprises one each of Brass or stainless steel permeability cell 12.5mm,'U' tube manometer with stop cock mounted on a laminated wooden stand, perforated metal disc, plunger, Rubber stopper, Rubber tube - 30cm long with rubber bulb. Balance with 0.001 gm resolution Stop Watch with 0.5 second resolution Manometer Liquid Whatman Filter Paper Filter Punch

Friability Test Apparatus : (1370) Used to determine the durability and abrasivness of tablets. A transparent perpex drum (made of imported perspex sheet 6.4 mm thick) 300mm dia x 35mm deep and white cover disc and nut, also a shaped radial fixed blade which carries the tablets along with it up to the central height and lets them off while the drum is rotating. Thus the tablets rub against each other without any hard impact. The drum rotates at a fixed speed of 30 RPM by a geared motor and the rotation period is controlled by a timer (imported time switch duration 1 to 15 minutes) per determined end preset. The motor unit is housed in a shaped steel cabinet with shaft extended on one side upon which the drum rotates. Switches with neon indicators and time switch are fitted on a panel and provided work on 220 volts 50C/s AC . Digital models also available.

Backed by a team of expert professional associates, who are having years of experience in the domain, we are rendering salt spray chamber or corrosion test apparatus. The offered product-line finds it used in different industrial applications and are widely acclaimed for its reliability and durability. Apart from this, the offered range is offered at the most market-leading price. features: digital indicators cum controller/indicator digital timer (999 hours) humidity meter with sensor mist dispersion automizer drainage system heating system hanging provision/rack provision air regulator air filter fog collection unit

• Material: Steel, Granite
• Size: 38 mm
• Resolution: 0.001 mm

Bitumen forms the chief ingredient for constructing a range of infrastructures, and efforts are made forever to enhance its strength. There are scores of bitumen testing equipments which carry out the job effectively. S.S.International endows its clients with some of the technically superior bitumen testing Instruments. Such equipments have been offered to meet up the requirements and needs of different industries for tests of varied products. We enjoy a competitive edge over the other market players on the basis of our ability to offer the customized products to a vast range of customers. Manual Pentameter, Digital Pentameter, Ductility Apparatus, heating oven, Kinetic viscosity bath, Flash Fire Point, Fross breaking Test Apparatus and Ring and Bell Test Apparatus are some of the bitumen testing equipments we provide to our clients.

Avail from us a distinct variety of Water Testing Apparatus that is manufactured from quality components. The Water Testing Apparatus that we Manufacture and Supply is highly demanded for the efficient testing of water. This Water Testing Apparatus tests water on various quality parameters such as salinity.

leak test apparatus, industrial electric ovens, Ultrasonic Bath

Concrete Permeability Test Apparatus, Standard Spatula, Shrinkage Bar Mould

Bitumen Testing Machine, Soil Testing Equipment, Concrete Testing Equipment

Slump Test Apparatus, Test Sieves, Sand Pouring Cylinder, Density Basket