Testing Apparatus Dealers in Rani Bagh, Delhi

• Country of Origin: India
• Type: Automatic
• Certification: CE Certified
• Application: Industrial
• Voltage: 220V
• Warranty: 1 Year

100 mm DIA. Three Cell ModelIS : 3085-1965.It consists of three sets 100 mm DIA cell mounted on a single control panel for testing independently three specimens 100 mm DIA x 100 mm high.The equipment comprises the following :Three permeability cells for 100 mm dia specimen. Each cell consists of a metal cylinder with a ledge at the bottom and flanged at the top, one removable cover plate and a funnel.Made of Gunmetal.A control panel with three independent control circuits for three permeability cell. Each control circuit consisting of a water reservoir, graduated gauge, glass tube, air inlet valve, pressure regulator, pressure gauge 0-15 kg/cm an air bleed valve, a drain crook for water reservoir and a shut-off valve for the permeability cell. A common air inlet for the three units is provided for connecting to the air compressor.(150 mm dia. Single Cell Model).IS :3085-1965.The apparatus is CCA-58 but provided with a permeability cell for 150 mm dia x 150 mm high specimen. The equipment comprises the following :-One permeability cell for 150 mm dia specimens consisting of a metal cylinder with a ledge at the bottom and flanged at the top. One removable cover plate and a funnel. An air bleed valve is provided on the cover plate. Made of Gunmetal.-A control panel fitted with a water reservoir, graduated gauge glass tube, air inlet valve, pressure regulator, pressure gauge 0-15 kg/cm, an airbleed valve, a drain cock for water reservoir and a shut off valve for the permeability cell.

Method to determine the resistance of geosynthetics to penetration by steel cone dropped from a fixed height, as a simulation of dropping sharp stones on their surface. Generally applicable to all geosynthetics. However, the test principle may not be applicable to some types of products. The specimen is clamped between two steel rings. A steel cone (45° tip angle, 1000 g) is dropped from a height of 500 mm onto the centre of the specimen. The degree of penetration is measured by insertion of a graduated cone into the hole.

• Automation Grade: Automatic
• Material: Stainless Steel
• Color: Blue
• I Deal In: New Only
•  :  

Flocculator is used to determine the percentage of the polymer in the water sample. It has gained common application in waste water treatment plants.

The Innovative Field Density Test Apparatus consist of a sand pouring Cylinder, fitted with conical funnel and shutter, one cylindrical calibrating container hole of 10 cm dia.

Brazilian Test Apparatus- The instrument is useful for testing specimen from 50mm dia to 100mm and of thickness of half the diameter. This is to test for indirect measurement of tensile strength of rocks. The specimen is held in circular jaws, this is primarily similar to a compression machine and consists of a small load frame having sturdy base with two vertical threaded rods and an adjustable cross head. The hydraulic jack is fitted at the centre of the base of the load frame. The jack of the load frame is self retracting and two plain platens are supplied. A pressure gauge capacity 0-100 kn x 1 kn is fixed at the base of jack. A maximum pointers is also provided on the gauge, a pair of semi circular platens for 50mm dia samples also provided. The instrument can be used in field also.   Optional Extras: Pair of jaws for samples dia (a) 60mm (b) 70mm (c) 80mm (d) 90mm (e) 100mm

• Brand Name: Teleflex
• Display Type: Analogue
• Hardness: 50-55 HRC
• Tensile Strength: 440 MPa

Bulk Density Meter, pressure recorders, dew point transmitters