Testing Apparatus Dealers in Shakurpur, Delhi

• Power Phase: AC/230 volt Single

The apparatus is designed to determine the abrasion rate and impact hardness of tablets. OneTwo transparent acrylic drums rotated by superior quality constant speed sturdy motor, mounted in painted sheet metal cabinet with chemical resistant epoxy coating. SPECIAL FEATURES: Realistic abrasion rate is obtained by pre-set revolutions through a pilot lamp as compared to time setting, where voltage fluctuation may change number of revolution in pre-set time.

We manufacture superior quality Slump Test Apparatus conforming to BIS –7320. The apparatus is widely used for the determination of workability of concrete where nominal size of aggregate does not exceed 38 mm. It finds applications in various industrial tests. Slump Test Apparatus is designed with precision to offer the maximum efficiency and high performance speed. We design our Slump Test Apparatus to cater to the varied specifications of the clients. Features The apparatus comprises of a slump cone with foot pieces fitted on a base with wing bolts.A swivel carrying handle fitted with the base also serves as a datum for measuring the slump, when moved into vertical position perpendicular to the base.A graduated tamping rod is used both for compressing the specimen as well as measuring the slump of concrete.The slump cone is filled with freshly mixed concrete and is tamped with a tamping bar in three or four layers. Working The top of the concrete is leveled off with the top of the slump cone, the cone is lifted vertically up and the slump of the sample is immediately measured.

• Driven Type: Electric
• Warranty: 1yrs
• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

We are a well-known Consolidation Test Apparatus Manufacturer and Supplier based in Delhi. The Consolidation Test Apparatus is used in a uni-dimensional consolidation test which is considered extremely important in soil mechanics. Our Consolidation Test Apparatus comprises of loading unit with maximum capacity of 20 kg/cm sq. Also, it features fixed ring type consolidomenter (Odeometer) cell assembly for testing 60 mm dia x 20 mm thick specimen, perforated pressure pad, channeled base with water inlet and gasket. Further, Consolidation Test Apparatus is provided with all necessary accessories like dial gauge, extension piece, test forms pad and many more.  Specifications : Set of weights to give a pressure of 10 kg/cm.sq. on 60 mm dia specimen, comprising: 7 Nos. 0.05 kg/sq.cm, 5 Nos. 0.1 kg/sq.cm., 6 Nos. 0.2 kg/sq.cm., 6 Nos. 0.5 kg/sq.cm., and 5 Nos. 1.0 kg/sq.cm. Accessories : Dial Gauge 0.002 mm x 10 mm. Extension piece, 40 mm long Optional Accessories : Varying head stand pipe, 50 cm. long with mm.scale Fixed ring type of consolidometer (Odeometer) cell assembly for 50 mm dia x 20 mm thick specimens complete with fixed ring guide ring, pair or porous stones, perforated pressure pad, channeled base, gasket and flanged water jacket Set of weights to give a pressure of 10 kg/sq.cm., on 50 cm. dia specimens Fixed ring type of consolidometer (Odeometer) cell assembly for 70 mm dia x 20 mm thick specimens, complete with accessories as above Set of weights to give a pressure of 10 kg/sq.cm., on 70 cm. dia specimens Fixed ring type of consolidometer (Odeometer) cell assembly for 100 mm dia x 25 mm thick specimens, complete with accessories as above Set of weights to give a pressure of 10 kg/sq.cm., on 100 mm. dia specimens SINGLE GANG THREE GANG

Unconfined Compression Testing Apparatus can be used either in a Laboratory or in field. This apparatus is as per the design of Building Research Station, U.K.Consists of a spring operated load frame with arrangements for loading 38mm x 76mm samples, one set of four load springs of stiffness 0.2kg, o.4kg, 0.8kg and 1.6kgmm, a calibrated mask and one set of 50 charts, in a metal carrying case. Spares & Accessories: Charts set of 50 Calibrated mask. Spring set comprising one each of stiffness 2Nmm, 4Nmm, 8Nmm and 16Nmm Coning toll for 38mm sample (female) Coning toll for 38 mm sample (male) Tripod stand wooden, for using the instrument in field.

• Color: Blue
• Material: Cast Iron
• Country of Origin: Made in India
• Usage/Application: Construction
• Height: 30 cm
• Finishing: Color Coated
• Top Diameter: 10 mm
• Features: Robust construction, Negligible maintenance, Corrosion resistance

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

• Certification: CE Certified, ISO 9001:2008
• Application: Leak Testing
• Voltage: 110V, 220V, 380V, 440V
• Dimension: 300mmx320mmx425mm, 320mmx325mmx450mm, 340mmx330mmx475mm
• Power: 1KV, 2KV
• Driven Type: Electric
• Warranty: 5yrs
• Temperature: 0-50°C, 100-200°C

We are one of the leading organizations for providing Leak Test Apparatus that is in huge demand in the market. This product perfectly suits the clients’ needs and expectations as it features an ideal blend of advanced technology, high efficiency, and low operational cost. Besides, these apparatus bring satisfactory experience to the clients by performing at a high level.

Product Description The Vicatronic apparatus, that is designed and manufactured using the most recent and sophisticated technology, is used for the initial and final setting time determination of cements or mortar pastes.The unit is manufactured with anticorrosion and tropicalised components to be used in places with humidity not below 90% and 20°C. controlled temperature as required by EN Specifications.The entire test is made in a fully automatic way and gives a very precise and repeatable result.The results are printed on the incorporated printer and this eliminates the manual operations of installing and zeroing the paper graph on the drum.The use of the appliance is extremely simplified by the guiding menu that is available in english, french, spanish, german, italian language. Features Automatic determination of initial and final setting time Large size 4.3″ touch screen color display LAN port direct connection to PC USB port data storage Conform to both EN and ASTM/ASTHO Customized test procedure Integrated graphic printer for printing numerical test data & setting time plot Practical in-water testing accessory (optional) Supplied complete with PC software for data processing VICASOFT-BASIC

Hand Operated: Proving ring type. Comprises of a hand operated load frame, cap. 30KN (3000 kgf.) screw jack for loading, handle and strain dial gauge bracket, adaptor for proving ring, conical seats and malefemale coning tools for 38 mm dial samples. Supplied without proving ring and dial gauge. Motorized: Comprises a screw operated load frame capacity 50 KN (5000 kgf.) with a gear box and motor drive giving 1.25, 1.5 and 2.5mmmin, rates of strain, pair of cone seating, adaptor for proving ring and strain dial gauge bracket. Supplied with one pair of malefemale coning tools for 38 mm dia samples but without proving ring and dial gauge. Suitable for operating on 230 volts, single phase AC Supply.

Floculator (Jar Testing or Multiple Spidle Stirrer) (PLT-195) APPLICATIONS of Flocculator jar testing apparatus Tanco Lab Products Flocculator jar testing apparatus has an extensive range and is manufactured in accordance to the set industry standard & as per the international quality standards. Along with some standardization Tanco’s Flocculator jar testing apparatus is highly customized according to wishes and requirement of our esteemed customers. Flocculator jar testing apparatus are used for uniform stirring of liquid samples. Flocculator jar testing apparatus basic functions include testing the performance of various chemicals in water & to evaluate them.

• Application: ETP, STP, R&D laboratory, Hotel Industry, Industrial Complexes, Water Research Industry
• Power: 220 v ac supply, 50 Hz, 100 W
• Temperature: 35 oC
• Features: Finds usage as Laboratory mixing and stirring equipment, Efficient and Economical handling of Flocculation matter, Correct estimation of dosing of alum and other coagulants
• Speed range: 2 to 250 RPM (Made available in variable speed control)
• Pre-set programs: 2
• Timer: Digital timer supports – 0 to 99 minutes
• Controls Keypad: Touch-sensitive
• Digital Display: LED, digital rpm indicator support
• Accuracy: +/-  2 RPM
• Size: Standard and Customized
• Body: Powder-coated body finish
• No. of Jar : 2, 4, 6

• Used: for the determination of the consistency of freshly mixed concrete .
• graduated Steel Rod: 16mm dia. x 600mm long
• Height: 30cm
• Internal Dia. Base: 20cm

Slump Test Apparatus is meant to test water cement ratio and workability of concrete. It is made of steel sheet to avoid corrosion.

• Capacity: 108 Liters
• Test Types: NSS + CASS Test
• Temperature Uniformity: ≤ ± 2°C

Whether you are new to corrosion atmosphere testing or have been conducting testing for years, we present Salt spray chambers or Salt Fog Chambers that are not only easy to use and maintain but also provide the accuracy and flexibility necessary to meet today's demanding corrosion test procedures including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. These machines create three types of manually adjusted environment; salt spray, high humidity and air drying at any given temperature within the chamber. Any combination of these environments can be programmed, in any order, to form a corrosion cycle. Such a corrosion cycle can be automatically repeated a predetermined number of times. Our models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS), Seawater Acidified Test (SWAAT) or Cupric Acid (CASS). Models above 480 Liters of capacity are ideal for Cyclic Corrosion Cabinet (Cyclic Corrosion Chamber). In Laboratories corrosion tests are used extensively for selection of materials and their surface protection. Our Corrosion box chambers are what you need to predict corrosion resistance of materials such as paints and coatings and are designed and developed to meet the widest possible range of industry standards:

Thermal Stability Test Apparatus, Halogen Acid Gas Test Apparatus

CBR Test Apparatus Field Type, Material Testing Equipments

SPIC Hot Deformation Test apparatus, ABT Meter

Thermal Stability Test Apparatus, Hand Hold Flammable Gas Detector