Testing Apparatus Dealers in Tri Nagar, Delhi

• Dimension: 300mmx320mmx425mm, 320mmx325mmx450mm
• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

We are a reputed firm engaged in manufacturing and supplying excellent quality Slump Test Apparatus. Slump Test Apparatus is used for determining the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm. The Slump Test Apparatus is designed in the shape of the frustum of a cone, open at both ends. Further, it is applauded for its high reliability, efficiency and durability. Consists of slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape, Two clamps slide over the foot grips of a standard slump cone and hold It securely while filling and rodding. A combination swivel carrying handle. Complete with graduated tamping rod 0-60 cms long and 16 cms long and 16 mm dia with 0-30 cms.

Thanks to our immense expertise in this domain that allows us to deliver nothing short of the best quality Consolidation Test Apparatus. In order to settle the financial transaction with our clients through the transfer of monetary value, we offer diverse options including online and offline payment procedures.   Specifications : Set of weights to give a pressure of 10 kg/cm.sq. on 60 mm dia specimen, comprising: 7 Nos. 0.05 kg/sq.cm, 5 Nos. 0.1 kg/sq.cm., 6 Nos. 0.2 kg/sq.cm., 6 Nos. 0.5 kg/sq.cm., and 5 Nos. 1.0 kg/sq.cm. Accessories : Dial Gauge 0.002 mm x 10 mm. Extension piece, 40 mm long Optional Accessories : Varying head stand pipe, 50 cm. long with mm.scale Fixed ring type of consolidometer (Odeometer) cell assembly for 50 mm dia x 20 mm thick specimens complete with fixed ring guide ring, pair or porous stones, perforated pressure pad, channeled base, gasket and flanged water jacket Set of weights to give a pressure of 10 kg/sq.cm., on 50 cm. dia specimens Fixed ring type of consolidometer (Odeometer) cell assembly for 70 mm dia x 20 mm thick specimens, complete with accessories as above Set of weights to give a pressure of 10 kg/sq.cm., on 70 cm. dia specimens Fixed ring type of consolidometer (Odeometer) cell assembly for 100 mm dia x 25 mm thick specimens, complete with accessories as above Set of weights to give a pressure of 10 kg/sq.cm., on 100 mm. dia specimens SINGLE GANG THREE GANG

• Color: Blue
• Material: Cast Iron
• Country of Origin: Made in India
• Usage/Application: Construction
• Height: 30 cm
• Finishing: Color Coated
• Top Diameter: 10 mm
• Features: Robust construction, Negligible maintenance, Corrosion resistance

We manufacture superior quality Marshall Stability Test Apparatus for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous pouring mixture loaded on the lateral surface. Our Marshall Stability Test Apparatus is made of superior quality raw materials and equipment that make it highly useful in various sectors. The Apparatus is precision engineered to work with perfection. We custom manufacture Marshall Stability Test Apparatus as per the specifications of the clients. Working This is for use with hot mixture containing asphalt or tarAggregate up to 25 mm maximum size Attributes Accurate constructionCustom manufacturedEasy operational featuresOffer test results with perfection The equipment comprises of following Three specimens cylindrical mould 100 mm diametermeterThree base platesThree collars 100 mm diametermeterTwo compaction hammers, 10 lbs. Weight, with 45 cm dropOne specimen extractorOne compaction pedestal complete with specimen holderOne breaking head assembly. Complete with diameterl micrometer and bracket for flow measurementOne load transfer barOne loading unit, motorized, with travel of 50 mm/min and fitted with motor, reversing switch and limit switches to restrict the travel. Fitted with hand wheel for finer adjustment to bring the proving ring in contact with breaking head assembly, capable of application of loads up to 5000 kg. Suitable for operation from Main supply 230 volts, 50 cycles, single phase, A.C.Proving ring of 5000 kg (50 K.N.)Diameterl gauge .01 mm x 25 mm travel

• Capacity: 108 Liters
• Test Types: NSS + CASS Test
• Temperature Uniformity: ≤ ± 2°C

Whether you are new to corrosion atmosphere testing or have been conducting testing for years, we present Salt spray chambers or Salt Fog Chambers that are not only easy to use and maintain but also provide the accuracy and flexibility necessary to meet today's demanding corrosion test procedures including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. These machines create three types of manually adjusted environment; salt spray, high humidity and air drying at any given temperature within the chamber. Any combination of these environments can be programmed, in any order, to form a corrosion cycle. Such a corrosion cycle can be automatically repeated a predetermined number of times. Our models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS), Seawater Acidified Test (SWAAT) or Cupric Acid (CASS). Models above 480 Liters of capacity are ideal for Cyclic Corrosion Cabinet (Cyclic Corrosion Chamber). In Laboratories corrosion tests are used extensively for selection of materials and their surface protection. Our Corrosion box chambers are what you need to predict corrosion resistance of materials such as paints and coatings and are designed and developed to meet the widest possible range of industry standards:

he fineness of cement has a significant effect in its physical properties when used in concrete. Generally the finer the cement powder, the more rapid the concrete will set, as there is an increase in its surface area. The measure of fineness is usually undertaken by sieving, and the result assessed against the cement standard for compliance. The Blaine air permeability apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The Blaine apparatus draws a defined volume of air through a prepared bed of cement of defined porosity. The apparatus comprises one each of Brass or stainless steel permeability cell 12.5mm,’U’ tube manometer with stop cock mounted on a laminated wooden stand, perforated metal disc, plunger, Rubber stopper, Rubber tube – 30cm long with rubber bulb. Optional AccessoriesAt extra cost Balance with 0.001 gm resolution Stop Watch with 0.5-second resolution Manometer Liquid Whatman Filter Paper Filter Punch

• Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply.: Output voltage                        :           0-10KV
• Output Current                       :           100mA: Capacity                                  :           1 KVA
• Rating                                      :           Testing duty (Continuous).: Cooling                                   :           Air cooled.
• (Peristaltic Pump Section): No. of Channel                       :           One
• RPM                                         :           0.01 to 9.99: Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

• Integral type proving Ring capacity: 3000Kgs
• A dial gauge: 0.01 x 25mm.

Originally developed by Bruce Marshall, a highway engineer in U.S.A later on standardized by ASTM. Generally the test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is measured when the same is loaded at periphery at 5cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmers for paving jobs. There are two major features of the Marshall method of designing mixes namely. a) densityvoids analysis, b) Stability-flow tests. The Marshall stability of mix is defined as a maximum load carried by a 0 compacted specimen at a standard test temperature of 60 C. The flow value is deformation the Marshall test specimen at under goes during the loading upto the maximum load, in 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity.

• Material: Metal
• Application: Industrial
• speed: 20 to 180 RPM
• Resistivity: Rust Resistant
• Durability: Long Life
• Surface Finishing: Polished
• Drive Type: Electric

Flocculator has been specially designed for use in water treatment plants to correctly estimate the Dosing of alum and such other coagulants for treatment of water and sewage. In provides identical Test conditions for all samples. Illumination base consists of fluorescent tube mounted below translucent plastic plate to provide diffused cold light through floc samples. Flocculator consists of heavy duty DC DRIVE variable speed motor heaving speed from 20 to 180 RPM with built in speed control. Stainless Steel Stirring rods are provided with adjustable spacers to adjust the depth of stirring Paddles. The stirring shaft can be removed without disturbing other stirrers. The unit is supplied without beakers to work on 220230 Volts A.C.

Our digital bulk density apparatus is specially designed to meet the requirements of usp standards. Our bulk density apparatus can hold two cylinders, capacity: 100 ml. The mechanism provides simultaneously rotating and tapping motion to the cylinders for packing the sample under test evenly and uniformly together. The user has to select the no. Of stokes in the counter & other selecting just press start & it will start the stokes & the digital display will show the number of strokes. We are among the leading digital automatic tap density test apparatus suppliers.

• Type: Lump Test Apparatus
• Certification: ISO 9001:2008
• Color: Grey
• Voltage: 110V, 220V, 380V
• Condition: New
• Power: 1KV, 2KV
• Warranty: 1yrs
• Temperature: 0-50°C
• Vacuum range: 150-300mm

We are the main supplier of this product.

The percentage passing of different fractions determines the porometry of the geotextile investigated. In the Hydrodynamic Sieving Method, the geotextile specimen, loaded with a certain quantity of glass bead fraction, is continuously rotated in a water trough, forcing the glass beads to pass through the geotextile openings. The apparatus consists of two test drums of 14 cm dia and 7 cm effective length with 16 nos. of 4 mm dia rods provided circumferentially at equal spacing to hold the geotextile specimen in position. Two troughs to contain the test drums are supported on horizontal axis, facilitating free rotation and capable of being filled with distilled water to a level of 20 mm below the drum axis. The clearance between the trough and the geotextile could be maintained at about 40 mm. The apparatus is provided with a motor drive and gear assembly to enable rotation of the drums at a speed of 5 rpm to 30 rpm. For conducting the test, the Geotextile specimen is cut and stitched to get a shape of 14 cm dia and 10 cm length to insert over the drum tightly, after immersing the specimen in distilled water for one hour, and secured by rubber 'O' rings. After placing 50 g of smallest size glass beads inside the drum, the lid is secured and the drum with the geotextile placed in distilled water to the desired level and rotated at 20 rpm for 1,500 cycles. In order to get the optimum filtration opening size, the drum is rotated at a speed of 5 rpm to 30 rpm for 250 to 2,500 revolutions. The percentage of beads passed through the geotextile by dry weight is determined. The test is repeated with increasing size of glass beads till 5% or less of the beads by weight pass through the geotextile. Rounded Beads made of glass, size 0.85 mm (passing 1 mm and retained at 0.85 mm)Rounded Beads made of glass, size 0.425 mm (passing 0.85 mm and retained at 0.425 mm)Rounded Beads made of glass, size 0.25 mm (passing 0.425 mm and retained at 0.25 mm)Rounded Beads made of glass, size 0.18 mm (passing 0.25 mm and retained at 0.18 mm)Rounded Beads made of glass, size 0.15 mm (passing 0.18 mm and retained at 0.15 mm)Rounded Beads made of glass, size 0.075 mm (passing 0.15 mm and retained at 0.075 mm) SGE-1018 Interface Friction Test Apparatus for GeotextileNote Direct shear apparatus not a part of this instrument  

• Application: ETP, STP, R&D laboratory, Hotel Industry, Industrial Complexes, Water Research Industry
• Power: 220 v ac supply, 50 Hz, 100 W
• Temperature: 35 oC
• Features: Finds usage as Laboratory mixing and stirring equipment, Efficient and Economical handling of Flocculation matter, Correct estimation of dosing of alum and other coagulants
• Speed range: 2 to 250 RPM (Made available in variable speed control)
• Pre-set programs: 2
• Timer: Digital timer supports – 0 to 99 minutes
• Controls Keypad: Touch-sensitive
• Digital Display: LED, digital rpm indicator support
• Accuracy: +/-  2 RPM
• Size: Standard and Customized
• Body: Powder-coated body finish
• No. of Jar : 2, 4, 6

The company is primarily engaged in the manufacturing, exporting, and supplying the highest-grade marshall apparatus in all across the globe. Our marshall apparatus is highly acclaimed by the national as well as international clients, for their excellent efficiency and working life. The marshall apparatus can be availed at the most competitive prices from us. description marshall load frame cap 50kn speed-50.8mm/min : 1 nobreaking head stability mould : 1 nocompaction mould steel, cylindrical : 3 nobase plate : 3 noextension collar : 3 nocompaction pedestal & manual operation, comprising steel : 1 noplate capped on a wooden post. A mould clamp is hutted to the top of the platecompaction hammer for use with compaction pedestal and 2 no. Mould, weight 4.5kg with a free fall of 457mmload transfer bar : 1 no

We are offering bitumen testing equipment. Bitumen is the ingredient in constructing and it is essential to enhance strength. Bitumen testing equipment such as bitumen testing machine, ring & ball (softening point) test apparatus, ductility testing machine, standard tar viscometer, bitumen laboratory mixer etc. Every testing equipment is designed & manufactured with great level of precisely to meet requirements of different industries and their respective testing methods bitumen in particular is a mixture of organic liquids which are highly viscous, black, sticky, entirely soluble in carbon disulphide. This material is composed of highly condensed polycyclic aromatic hydrocarbons. For testing this bitumen on varied parameters.

Thermal Stability Test Apparatus, Halogen Acid Gas Test Apparatus

SPIC Hot Deformation Test apparatus, ABT Meter

Thermal Stability Test Apparatus, Hand Hold Flammable Gas Detector

Laboratory CBR Test Apparatus, Compaction Factor Apparatus

CBR Test Apparatus Field Type, Material Testing Equipments

bitumen testing equipment