Testing Equipment Dealers in Jwala Nagar, Delhi (46 products available)

We are a trusted name engaged in supplying and exporting of Brinell Hardness Tester. Brinell Hardness Testers (B-3000-H) are manufactured with a hydraulic power pack and control circuit for effortless performance. Brinell Hardness Tester (B-3000-H) is used for various loading unloading operation. Moreover, customers can avail our range in a various models and configurations at nominal prices.Features Technologically advanced Minimal maintenance cost Outstanding performance

RMS 200 series flow meters are extremely versatile flow meters that can be used for a wide variety of applications. These meters offer extreme reliability and low cost for flow measurement. RMS 200 series flow meters can be used for water and water like liquids. These meters can also be used for line sizes from 0.5” to 48”. Microprocessor based instrumentation ensures accurate readings for both rate of flow indication and total flow indication. A number of programmable features including In-line calibration are standard. Advanced models can offer relay outputs for signals exceeding rate of flow or total flow set points. Industry standard 4-20mA output is optionally available. These instruments are field programmable and doesn't needs any special instruments for calibration. All variables and program parameters are programmable through key pad provided in the instrument. In addition, these meters have RS485 or RS232 Mode of communication to PC through MODBUS Protocol. All the parameters are saved in a non volatile EEPROM memory which doesn't needs any external battery. There is a advanced power fail feature by which even if there is any power failure the Total Flow reading is automatically saved to memory and resumes with the same value after Power OnRMS200 is available in a IP65 enclosure with field mount, panel mount, pipe mount as well as wall mount options

Weight : 350 G

Detecting Gas : Co, H2s, O2, Lel, Co2, Voc, H2, Nh3 (or Any 5 Gases With Temperature & Humidity)

Display Type : Digital

Working Environment : 40 Deg C

Temperature Measurement : -40 Deg

Protection Grade : Ip66

Special purity measuring burette for gaseous CO2 Exactitude of measurement upto 0.1% by volume. The material that is used for the production complies with high quality standards and quality-proved by the experts. Also, we make sure that the raw material is sourced from the trusted places. We are positioned amidst the renowned names supplying finest array of CO2 Purity Tester.

Coating Thickness taster Gauge is engaged in producing and providing a wide range of Measuring Instruments that are available in varied sizes, shapes and specification to suits the various requirements of our valued customers. These are perfectly designed as per the various industrial requirements.

The dataTaker® DT8x series are intelligent data loggers that provides an extensive array of features allowing them to be used across a wide variety of applications. The DT8x is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The dataTaker® DT80's Dual Channel concept allows up to 10 isolated or 15 common referenced analog inputs or for the DT85 32 isolated or 48 common referenced analog inputs to be used in many combinations. With support for multiple SDI-12 sensor networks, Modbus for SCADA systems, FTP and Web interface, 12V regulated output to power sensors, the DT8x is ready to be installed into environmental, industrial and many other types of monitoring projects. DT82E 2-6 universal inputs DT82I 2-6 universal inputs DT80 5-15 universal inputs DT85 16-48 universal inputs Expandable Analogue channels using CEM20. DT80 up to 300 and DT85 up to 900 USB memory for easy data and program transfer Flexible communications (USB, Ethernet and RS232) Various remote connection options eg dial up modem and gprs Key Features

We are a name of repute in manufacturing and supplying Load Frames of superior quality at reasonable rates. The Load Frames we export are available in two models. LOAD FRAME MOTORISED CAPACITY 50KN HAVING 8 SPEEDS FeaturesTwo Pillar typeDetachable FrameEnclosed Motor and Gear SystemIndicatorSpeed ChartUseful in Triaxial and C.B.R. testComponentsCabinet which housed the electrical motorReduction gear the loading is done by the upward movement of the lower plate which is firmly fixed to the lead screw. When the lever is set in the neutral position , it isolate the lead screw from the rest of the drive mechanism, and the lead screw ca n then be manually moved up or down by operating the handle.A main switch, an indicator and a forward reverse switch are fixed on the unit.A relay is fitted inside the cabinets that in case of power failure, the unit will not restart of its own on the resumption of power, unless the switches are operatedThe adjustable cross head can be set at any desired position or height over the two pillars and secured in position by tightening the adjustment nut. It has a hexagonal adaptor.Its rates of strain are 0.0 2 5mm. /min, 0 .0 5mm/min , 0 .0 5mm/min , 0.0 6 2 5 , 0 .1 2 5mm/min , 0 .0 2 5mm. /min , 0 . 0 2 5mm. /min , 0 . 5mm/min, 0 . 6 2 5mm. /min and 1.2 5mm. /min.Suitable forOperation on 230 volts,5 0 cycles , single phase ,A.C. supply LOAD FRAME MOTORIZED CAPACITY 50KN WITH 3 RATES OF STRAIN. Technical detailsTwo pillar typeDetectable frameEnclosed motor and gear systemIndicatorUseful tri-axial and C.B.R testElectrical motorReduction gearAdjustable crossheadMain switch, forward reverse and reverse switch fixed on the unitRelay is fitted for power back-upHexagonal proving ring adaptorRate of strain are 2 .5mm./min, 1.5mm/min and 1.2 5mm. /minUsed inConstruction industryChemical industrySoil-testing purpose

Levsen series MLI -31 Magnetic Level Indicator simple & reliable Level Indicator, Which is based on magnetic principle. It is absolutely safe for dangerous liquid even under high pressure. Magnetic Level Indicators are widely used to observe the Level of tanks or vessels that contain liquid media. Magnetic level gauges utilize a float that contains one or more magnets. As the float rises and falls its magnetic field passes up and down the level column. The level indicator follows the magnetic field.Simple Magnetic proven design Float moves up & down on Probe according to Liquid Level and Fixed limit switches inside the probe change their contacts by magnetic attraction.

Jindal New Modular Design Stability test chamber is most versatile and highly reliable chamber ideal for stability & shell life test for drugs, its substances & various other products/devices for research and quality control examinations in pharmaceutical, food and cosmetics industries and biotechnology. Construction Outer body is made of Mild steel duly powder coated and the inner chamber is made of Stainless steel. It has a provision for allowing wide range of tray positions and spacing. Stainless steel trays with perforations are provided. The stainless steel chamber is insulated from the outer atmosphere with a high density polyurethane foam insulation to prevent thermal losses. The complete body is mounted on castor wheels at the bottom for easy mobility.    Heating The heating is done by finned heaters to maximum heat exchange process and to achieve the set temperature in a short time interval.    Cooling The cooling is done by a highly efficient hermetically sealed refrigeration unit with air cooled condenser & CFC free eco friendly refrigerant to achieve set temperature in a short time period.    Air Circulation Highly efficient forced air type circulation with motor blower assembly is provided to maintain uniform temperature inside the chamber.    Control Panel All controls and circuitry are housed at the top of the chamber and therefore protected from spillage.    Fully Automatic Microprocessor Control

The hydrostatic test is for all types extinguishers. After hydrostatic testing, the fire protection technician must attach a label to the fire extinguisher, recording the month, year, test pressure used and name of the fire protection service company. We provide CCE approved hydro Testing and Refilling for all types of Fire Extinguishers and BA cylinders.

Type : Alcohol Breathe Analyzer

Application : Personal Alcohol Breath Tester

Color : Black ,white

Display : LCD Display

Material : ABS Plastic

Sensor type : Semi-conductor Sensor

Used for measuring thickness and corrosion of pressure vessels, chmical equipment,boiler, oil storage tanks.etc. In Industries of petroleum, Shipbuilding, Power Station, and machine manufacturing.  

Total Loads : 250 to 3000 in stages of 250 kgf

Max. Test height : 380 mm

Depth of throat : 200 mm

Net Weight : 450 kgs

Machine Height : 1185 mm

Drive power : 0.66 hp

FULLY AUTOMATED FUEL CELL SENSOR BASED BREATH ALCOHOL ANALYZER FOR INTEGRATION WITH ANY APPLICATION  

We offer world class NozzleTester which is made from quality Aluminium, that offers it durable and strong structure to them. Endorsed by expert designers and engineers for its high performance and unique construction, the Nozzle Tester offered by us has carved niche for itself in the market. Attributes Strong bodyUnique construction

Warranty : 1 Year

Color : Blue

Weight : 290gm

Model Name/Number : M266

DC Voltage : 1000V

Brand : Mextech

Usage/Application : Laboratory

Jaw Open : 51mm

Digit Display : 31/2 Digits

AC Voltage : 750V

Display Size : 52 x 24mm

Battery Voltage : 9 V

Storage Temperature Humidity : 60 DegreeC

Reading Rate : 3 Times/second

Special purity measuring burette forgasseous CO2 .Exactitude of measuring upto 1% by volume.