Testing Equipment Dealers in Ranjit Nagar, Delhi

Measure samples in nutrient solutions, water, soils, and tissue sap · Waterproof pocket-sized meter with digital calibration · Sensors store dry and are field replaceable · Accuracy correlates well with laboratory analysis · Unique flat sensor allows you to conveniently and accurately measure samples as small as 0.3 ml · Automatic temperature compensation, waterproof, auto power-off · Includes two CR2032 batteries, case and calibration standards

• Features: Well textured, Reliable, Efficient, Graded performance, Resilient

• Type: Salt Fog Chamber
• Certification: CE Certified
• Color: Available in Many Colors
• Voltage: 220V
• Application: Industrial Use
• Power: 6-9kw

The updated models of Salt/Cass Fog Test Chamber specially designed for evaluating the corrosion resistance of the surface treatment of metallic materials by Copper Accelerated Acetic Acid Salt Spray Test Method. It consists of following parts : Test Chamber : It consists of Cabinet and Lid and is constructed with insulated double structure made of FRP (Fiber Reinforced Plastic) Moulded Sheet. The Interior & Exterior Sides of the Chamber are Acid Proof, Alkali Proof, Impact Proof and easy to clean. The upper part (triangular shaped lid made of FRP with Acrylic Glass Window) has sufficient space for the mist to accumulate naturally on it and is so shaped that drops so accumulated do not fall on specimen being tested. A full top opening door will be provided for ensuring maximum working space inside the Chamber. Air-Saturator : It is provided to supply heated and humidified clean air, over 90% to 98% RH, for Atomization of the solution. It consists of Body (made of stainless steel), Heater, Bubbling Nozzle, Air Cleaner & Pressure Regulator. Air Regulator : The Air Regulator will maintain a constant pressure of air at 70 to 170 kpa Air Filter : The compressed air will be passed through a filter arrangement to remove all traces of oil and solid matters before sent to the saturation tower. Lid Sealing : Lid sealing through water seal method Mist Dispersion Atomizer : Atomizer made of Acrylic Glass will be equipped in the Chamber having property of non-choking. It produces a mist of atomized solution, which is distributed uniformly throughout the exposure zone by means of Mist Dispersion Atomizer incorporated with a baffle to prevent dispersion of large liquid droplets. Heating System : The temperature within the chamber maintained by heater with blower system, which provided in-between the exterior and interior walls. Solution Supply Tank : Solution Supply Tank will be provided to supply solution to Mist Dispersion Tower and will be made of FRP (Fiber Reinforced Plastic) Moulded Sheet. Solution Heating : Heating of solution in the Solution Tank by a special type of Glass Heating Element (two nos) fitted in the Solution Tank. Mist Collector : Two Mist Cylinders are provided for measurement mist quantity. Each has 80 cm² of horizontal area. The condensate is collected in individual graduated cylinders. pH Indicator : pH Indicator is inbuilt in Control Panel Control Panel : Separate Control Panel will be provided. The Control Panel will House : RH and Temperature Controller-cum-Indicator for Main Chamber. PID Temperature Controller-cum-Indicator for Air Saturating Tower. PID Temperature Controller-cum-Indicator for Solution Tank. Pre – Set Timer, ON/OFF Switches, MCB, Electronic Relays, Indicating Lamps & Time Totaliser pH Indicator.   Safety DeviceAudiovisual Alarm start at the time of shortage of water in both the Saturating Tower and Solution Tank. WiringAll wiring will be as IS code.  Channel type wiring will be done with suitable current rated copper wires.Standard Accessories SS Rod with PVC coating : 05 pcs Measuring Cylinder with Rubber Cork : 02 nos Glass Funnel : 02 nos S. S. Hanger : 15 pcs EPT Tube : 01 Mtr.                                                             Power Supply : 220/240 V, 50 Hz, Single Phase, AC Mains.                                                                                                                              Performance Test Temperature :  Ambient to 50°C Temperature Accuracy : ± 1oC. Humidity Range :  95% to 98% will be maintained during the Salt Spray with  saturation of Salt Solution. Humidity Indicator :  RH Indicator will measure 90% to 100%. Mist Collection :  1-3ml/80cm²/hour at the same position as specimen to be tested. Mist Pressure :  0.8-1.8Kg/cm² (70-170 KPA). Heating System :  Through hot air tower system.   Standards  : As per ISO 7253:1984, IS – 101 (Part 6/Sec 1 – June 1997), IS – 9000, IS – 6910, ISO – 3768 Part-I, ASTM – B – 117 – 73, ASTM – B – 368, DIN – 50021, JIS – 2371

This machine is used to determine the hardness of asphalt material the design features direct vertical loading with loading weight that rest on thrust bearings therefore load is applied to the specimen without transmitting shock to the loading column. At the end of the loading period the depth of penetration of the pin can be read form the dial gauge to an accuracy of 0.01mm. The thermostatically controlled heater unit has a built in impeller which circulates the water to maintain an even temperature throughout.

• Rated Power: 9V DC Battery
• Dimension: 170X100X45mm
• Weight: 300gm

• Type: Voice Logger
• Certification: ISO 9001:2008, MSME
• Condition: New
• Operating System: Window 10, Window 7, Window 7 Ultimate, Window 8, Window XP

PCI Voice Logger provided with window base software has its utility for 08 telephone lines/PBX extns. With the help of this, the user can record the calls conversations and stack into the database via the user management software and retrieve call records when needed.

• Available Software: ACCTee PRO

By making use of quality packing material and with the assistance of our experts, we are able to meet diverse packaging requirements of the clients with ease. Thus, we make sure zero damage at client's end. Since, we have collaborated with numerous distributors; we can cater to buyers all over Delhi(India) and other markets.   Details : More accurate thanks to precision rotary table on air bearings Easy to use thanks to guided measurement in ACCTee PRO Faster thanks to patented semi-automatic orientation Compact table-top form tester Measuring Z axis with a straightness of  0.25 µm/ 100 mm Ideal for form measurements on precision parts up to 25 kg

• I/p Voltage: 380/400V, 50/60HZ AC supply
• Scale :: 0-40A
• Capacity: Up to 3000KVA

AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards. During manufacturing each unit is tested at multiple stages, thus ensuring consistency and best quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in airoil, oil insulation, and pollution Test.

For determining the scratch hardness of ready mixed paints and enamels, which is the minimum load required to produce a scratch showing the bare metal surface of the painted panel. The apparatus consists of a 1mm dia hemispherical stainless steel needle, fixed to a platform of a counter-balanced rod which is assembled on a grooved platform. A rack moves through the groove, to which a painted panel can be clamped. An indicator lamp is provided to indicate the metal contact it the needle penetrates the paint surface to make contact with the metal. Complete with 1 kg weight. Suitable for operation of 220 V, 50 Hz, single phase, AC supply.Details Product Code: EKE 601 Standrad: IS:101 EKE 60101 Needle EKE 60102 Weight, 2 kg

6 cube mould 12 cube mould18 cube mould24 cube mould 30 cube mould36 cube mould .

• Input VOLTAGE: 230, ?10% 50Hz, 1 Phase AC
• utput voltage: Cuntinuously variable from (i) 0 to 3 KV for 3 KV Test Set (ii) 0 to 5 KV for 5 KV Test Set
• Capacity: 50mA maximum in the H>V. Side
• Tripping current: 50mA & 50mA (Toggle switch provided)
• Duty Cycle: Intermittent i.e., 5 min. ON & 10 min. OFF
• Mode of Operation: Manual
• KV Meter to read the output voltage: Milliammeter to show leakage current

We are engaged in designing Marshall Stability Test Apparatus since 8 years and have established our name among the leading Manufacturers, Suppliers and Exporters of Marshall Stability Test Apparatus from Delhi, India. Marshall Stability Test Apparatus is extensively used for measuring the resistance to plastic flow of cylindrical specimen of bituminous pouring mixture loaded on the lateral surface. Our offered apparatus is highly robust and is suitable for handling hot mixture containing tar or asphalt.   The Apparatus Consists of : A loading unit motorized capacity 50 KN with two telescopic pillars and an adjustable cross head. Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. The load frame has fixed speed of 50.8 mm per minute. Operated on 230 Volts A.C. Compaction pedestal with specimen mould holder- 1 No. Compaction Rammers, 4.5 kg weight and free fall 45.7 cm.- 2 Nos. Breaking head assembly with provision to fix flow meter.- 1 No Specimen mould 10.16cm ID x 7.6 cm high with base plate and extension collar- 3 Nos 6Kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting Plate- 1 No

Hardness Tester For Mastic Asphalt-VSLIC4011 Hardness tester for Mastic Asphalt has been fabricated to meet the essential requirements od IS 1195 – 1968 in finding out the Hardness Number of mastic asphalt. Hardness Number is defined as the figure denoting the depth in hundreds of a centimeter, to which a flat ended identation pin in the form of a steel rod 6.35 mm in diameter will penetrate the mastic under a load of 31.7 kg applied for 60 seconds, the temperature being maintained at 35′ +/- 0.5′ C or 45′ +/- 0.5′ C. the unit is complete with load release mechanism. General Descripation & Specifications : The apparatus consists of a frame supported by means of four leveling screws.On the top plate ,a lever with a counter balances weight and a load hanger is fixed .The ration of the lever to weight is such that when the weight is kept on the hanger ,the ultimate load acting on the penetration pin is 31 kg. A thermometer is fixed by a clip ,which records the temperature of the water in the container. The load transfer bar passes through the support bracket and rest on the specimen . The penetration load can be adjusted and locked before the test is conducted .An adjustable ring is provided on the load transfer bar and a rest point.The dial gauge of 0.01 mm accuracy to record the depth of penetration is also provided .The ring can be adjusted and locked in position for initial setting of dial gauge. A cam which is operated by the handle is provided to lock or free the load transfer bar . Hardness Tester For Mastic AsphaltHardness tester for Mastic Asphalt has been fabricated to meet the essential requirements od IS 1195 - 1968. A thermometer is fixed by a clip ,which records the temperature of the water in the container. Hardness Tester For Mastic Asphalt Summary It consist of an internally insulated cabinet to the base of which is fitted a water bath having two taps. The bath is heated by an immersion heater and the temperature is controlled with the thermostat at 35 ° +/- 0.5° C. A 6.5mm dia pin is loaded on the specimen by means of a lever to give a 31.7 Kg weight. A dial gauge 0.01 x 25 mm is provided to record the penetration of pin into the specimen.

Our company has gained expertise in providing Scratch Hardness Tester to our valued clients. Manufactured using high-grade components, our product can effectively measure the scratch hardness of mixed paints and enamels on metal surfaces. We are capable of timely delivery of Scratch Hardness Tester to various countries like America, Russia, Oman, Qatar, Sudan, etc. That is why we are a celebrated Manufacturer, Supplier and Exporter of Scratch Hardness Tester based in Delhi, India.Features : For determining the scratch hardness of ready mixed paints and enamels, which is the minimum load required to produce a scratch showing the bare metal surface of the painted panel. Apparatus consists of a 1mm dia hemispherical stainless steel needle, fixed to a platform of a counter-balanced rod which is assembled on a grooved platform. A rack moves through the groove, to which a painted panel can be clamped. An indicator lamp is provided to indicate the metal contact it the needle penetrates the paint surface to make contact with the metal. Complete with 1 kg weight. Suitable for operation of 220 V, 50 Hz, single phase, AC supply

• Country of Origin: India
• Type: Blood Pressure Monitor
• Certification: CE Certified, ISO 9001:2008
• Application: Blood Pressure Reading
• Weight: 200-400gm
• Color: blue and silver
• Feature: Highly Competitive, Light Weight, Mercury-free
• Condition: New

Product Description Features: Unique shock resistant Sphygmomanometer matching the ISO 81060 standard. Large diameter scale design is easy to read. High-precision air - release valve provides the precise air-release rate adjustment. Quick delation & Soft bulb for fast infation. Ergonomically designed adult cuff.

Our company is enlisted among the nonpareil Manufacturers, Suppliers and Exporters of Digital PH Meter (112). Strict quality-tests based on different parameters like accuracy, performance, functional life ensure that only defect-free meters reach the buyers. Courtesy our brilliant logistics network, we are capable of delivering bulk orders of these within the promised timeframe. One can obtain these at competitive rates from us.

• Brand Name: RC BENTEX
• Display Type: Counter
• Phase: Single Phase
• Measuring Energy Range: 5A-20A
• Color: black
• Frequency: 50HZ

single phase (sp), measuring range: 5-20a , 10-40a , 10-60a , 20-80a, type : counter / lcd, class of accuracy: 1.0s, supply voltage: 240v, ( - 40% to + 20%), frequency: 50 hz + 5%.

• white: white

Product Description: Owing to our ethical business practices and transparent policies, we have been able to become one of the reputed manufacturers and suppliers of Pencil Maze Test Board. These boards are highly ideal to assess coordination or learning problems of the patients. To manufacture the board, we use high quality materials, sourced from the most reliable and trusted vendors. Offered at the affordable prices, the bottom of our Pencil Maze Test Board has hard surface to prevent grooving. Features: Light in weight Breakage free Smooth finishing This durable pencil maze can be used to assess coordination or learning problems. The bottom has a hard surface to prevent grooving, and it uses a paper to produce a permanent record of subject's performance. Can be used with blind-fold goggles. Additional Information: Port of Dispatch: Delhi Production Capacity: 100 Delivery Time: 1 week

• Color: Blue
• Warranty: 3 Months
• Model Name/Number: HI98303
• Usage/Application: Laboratory
• Brand: HANNA
• Display Type: Digital
• Battery Type Per Life: 1 Year/ Subject to Usage

• Country of Origin: India
• Material: Stainless Steel
• Certification: ISO 9001:2008
• Color: Light White, Off White
• Voltage: 220V
• Condition: New
• Dimension: 300mmx320mmx425mm
• Power: 1KV
• Driven Type: Electric
• Phase: Single Phase
• Warranty: 1yrs
• Temperature: 0-50°C
• Vacuum range: 150-300mm

• Packaging Type: Box
• Application: Swimming Pool
• Hardness of water Testing: Six chemicals
• Test kit: 6 Way
• Testing items: PH / CL / Bromine / Alkalinity / Acid Demand / Total hardness
• Box Size: 19 x 7 x 7.5 cm

We provide highly efficient Automotive Sensor Tester. Our range of Automotive Sensor Tester includes a wide range of Sensor Tester, Car Scan Tool like Multi Brand Car Scanner. It is due to our expertise in supplying high quality products that has put us among the leading Importer and Supplier of Automotive Sensor Tester.

Product Code: EKE0774   Dimensions (L x W x H): 940 x 200 x 250mm (in case)Weight: 16kg   ENKAY also offers an alternative to the Clegg Impact Tester for quality control. This works the same the principle of a known mass falling a known distance. The tester's reaction is recorded on a digital readout on a scale of 0 - 100 Impact values, which correlate exactly to Clegg Impact values or CIV.The unit is supplied - with a year long calibration and a calibration a 'test ring' for daily operational checks. All contained in a strong lightweight transit case.

• Capacitors Range: 199.9 pF

The Digital Capacitance Meter is a precision instrument capable of measuring a wide range of capacitance values. It covers the range of low value ceramic and styroflex capacitors to the high value range of electrolytes. The instrument uses solid state, low drift circuitry to ensure a stable reading and a high accuracy. The instrument is ideally suited for quality control departments as well as electrical and electronic industry.

Unjointed Finger Probe   This Probe is made for forceful insertion where the flexibility of the Jointed Finger Probe would be an obstruction. The handle is designed with a threaded hole for use with force gauges. To verify protection of persons against access to hazardous  live parts of hazardous mechanical parts, these are used.   Ball Accessibility Probe with Handle   The 50 mm. Impact Ball with Handle is used to test as per IEC 60529 Standard for protection against access to hazardous parts. Ball is made of chrome-plated hardened steel, and the rest is made of polyamide. It is for impact and access testing.   Test Pin Probe, 15 mm. Long   The Test Pin Probe is used to test for accessibility of small objects and meets IEC, CSA and UL requirements. The probe is made of stainless steel with an insulated handle as per IEC 60950 and 61032 Standards.   Test Rod Probes   The ball on all models is 35mm in diameter. All probe gauges are used for measuring the protection against access to hazardous parts. The rod is made of stainless steel and the stop face and handle are made of plolyamide. Handles are threaded to accept a force gauge.   Unregulated Power Source An Unregulated power source with current limiting circuit, Digital Voltmeter and fault indicator to be used with few test probes as per the standards test requirements

• Used: for determining the fineness of cement in terms of specific surface expressed as total surface area in squarecentimeters per gram of cement.
• Spares and accessories: Packet of 12 filter paper discs. Non-perforated disc. Suction bulb.
• Model: ASI-502