Testing Equipment Dealers in Rishi Nagar, Delhi

• RESOLUTION: 0.1 upto 200 & above 1
• RANGE AMP: 0-200µ, 0-200m, 0-2, 0-00, 0-1000, 0-2000
• DISPLAY: 3-½ Digit, 7 Segment .56" Height; Red L.E.D.
• SAMPLING RATE: 2 Samples/Seconds (Typical)
• POWER SUPPLY: 180-230V AC ± 10% 50/60Hz
• AMBIENT TEMP./ HUMIDITY: 0-50°C, 35-85% RH
• DIMENSIONS: 96(H)x96(W)x140mm(D)

 Nutronics India is the India's premier developer and manufacturer of start-to-finish Industrial DIGITAL PANEL METER (Ampere).

• Type: Tensile Strength Tester
• Color: Blue And Grey
• Condition: New
• Warranty: Lifetime Buyback Warranty
• Certification: ISO 9001:2008 Certified
• Country of Origin: India
• Brand Name: Paramount

Tensile Strength tester is professionally applicable to measurement of tensile, peeling, tearing, adhesive, pulling force as well as other properties of fabrics ,yarn leas , home textile , footwear, Leather, plastic films, soft package materials, plastic flexible tube, adhesive tapes, label stickers, protective films, aluminum foils, diaphragms, non-woven fabrics, leather ,rubber and paper, etc. Paramount Tensile Strength Tester i9 ™ ( with software) is Next Generation equipment, which works on the Constant Rate of Elongation (CRE) principle. The equipment bod y is made of mild steel with three jaws to test specimen. The lower clamps or jaw is movable & the upper clamp is stationary. The load exerted on the movable jaw is sensed by load cell attached with upper clamp, which directly indicates the load digitally in kgf as well as in software.

• Range: 0.0 to 9990 μs/cm
• Resolution: 1μs/cm
• Accuracy: ±2%
• Calibration: manual, one-point
• Battery Type: 1.5 V (3 pcs.)

• Feature: Ruggedness, Reliability and Accuracy

• Type: Gas Permeability Tester
• Certification: ISI Certified, ISO 9001:2008 Certified
• Application: Industrial Use, Power Grade Use
• Color: White
• Feature: Easy To Use, Four Times Stronger, Superior Finish
• Condition: New
• Frequency: 45Hz
• Automatic Grade: Automatic
• Power Source: Battery, Electric
• Operating Current: Double Phase
• Warrenty: 1year
• Temperature Capacity: Medium Temperature
• Puncture Voltage: 440V
• Power: Electronic

• Application: Industrial Use
• Color: Grey
• Feature: Four Times Stronger, Sturdy Construction
• Frequency: 50hz
• Tensile Strength: 100-125Mpa
• Phase: AC Single Phase, AC Three Phase
• Temperature: High Temperature, Low Temperature, Medium Temperature

• Brand Name: U-Tech
• Automation Grade: Manual
• Power Supply: AC 220 V 50Hz
• Vacuum Degree: 0-90kPa
• Air Pressure: 0.5MPa

Capacity up to 2 liters : For two Stirrers For four Stirrers For six Stirrers

• Condition: New
• Warranty: 1 Year
• Power Source: Electric
• Certification: CE Certified
• Test Voltage Range: 12v
• Mounting: Wall Mount

• Power: Electronic
• Usage: Universal Testing Machine
• Compressor: DC Compressor
• Features: Precise control of temperature and humidity, Castor wheels for ease of mobility
• Temperature Range: 20°C to 60°C
• Temperature Accuracy: ± 0.2°C
• Warrany: Free parts warranty for 12 months

The company is the chief Stability Test Chamber manufacturer, exporter, and supplier in india. Our stability test chambers are used for conducting studies for stability and shelf life on drug and drugs substances. Moreover, the stability test chamber is extensively used in cement plants, seed testing, testing on electronic & mechanical components, biological studies, packaging industries. The inner chamber of our stability test chamber is fabricated with stainless steel.   Construction Inside walls are either of anodized aluminium or stainless steel as desired and outside is of mild steel Finished with white stove / enamel paint Insulation is of 65 mm thick glass wool Humidification is caused by steam vapors Humidity range from ambient to 100% r.h. Is controlled by a humidistat / contact thermometer (accuracy +- 5% r.h.) Dry temperature ranges from 10 oc to 65 oc with an accuracy of +- 1oc controlled by thermostat Correct temperature is as read on glass thermometer It is provided with a full view double glass door. Suitable to work on 220 volts a/c 50 cycles

• Sizes ( W X D X H In MM): 810 x 400 x 255
• Temperature Range: 97°C. ±2°C

Accelerated Curing Tank is double walled curing tank. Inside chamber of stainless steel and outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. Temperature ranges from 97°C ± 2°C. The temperature is totally microprocessor based P.I.D. or Digital Temperature Controller Cum Indicator controlled for accurate temperature rating. double walled Inner Body: Inner chamber made of Stainless steel. Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. Insulation between inner & outer wall with glass wool/ mineral wool thick to avoid any heat loss. Temperature Range: Temperature ranges from 99.9°C with temperature accuracy of ± 2°C. Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.  Circulation :Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion Safety Feature: Thermostat based safety device. Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.

• Material: Metal & Plastic
• Application: Industrial
• Main Unit Weight: 750g

The most standard model of “SOKKIA” N-Series has made the excitingly highest attainment in the history of sokkia digital Planimeter ever made. Measuring capacity is remarkably enlarged. Measuring by 6-digit pulse count enables to measure 100 times larger accumulative area than ordinary planimeters. Easy calculations of Cumulative and Average Value Measurement.

• Type: Soil Testing Equipment
• Application: Paper Testing
• Weight: 10-50kg

Road Testing Equipment · Pavement Content Tester · Avantech provide wide range of road, runway, airport pavement testing equipment in India

•  Brand:  Sanwa Japan
•  Product Code:   PM300
• Waranty: 12 Months

We are main supplier of this product.

• Accuracy: pH mV

• Auto Temperature Compensation Facility • 3 ½ digit LED Display • Auto Polarity & Decimal Indication • Slope Control. COMPENSATION :Manual : 0 to 100oC.SLOPE CONTROL :80 to 120%.

• Display Type: Digital
• Accuracy: 0.5 percent (2 digits)
• Brand Name: LUTRON
• Hardness Scale: Approx. 0.4 mm max.
• Warranty: 1 year
• Power: 6 x 1.5 V AA (UM-3) size battery
• Item Code: 5120
• Max. capacity: 20 Kgf x 0.01 Kgf (10 gf).
• Tip size: 3 mm, 6 mm, 8 mm, 11 mm.
• Model Name/Number: LI-5120
• Dimension: 215 x 90 x 45 mm
• Automation Grade: Automatic
• Weight: 650g
• Temperature: 0 to 50 Degree Celcius

We are leading supplier of huge range of Alcohol Testers.

The high low temperature test chambers from Weiber are climatic test chambers, designed to simulate highly precise high and low temperature environments for the testing of electrical and electronics items, metallic products, automobile parts, food items, biological samples, chemicals, building materials and other wide variety of processed and packaged goods. These test chambers find widespread usage in manufacturing units, quality control units and scientific research organizations and are commonly employed for heat endurance test, cold endurance test and humidity and dryness endurance tests of products. These tests help in determining the product performance in specific environments and also help in identifying any manufacturing flaws and in determining its stability and shelf life. These high low thermal chambers from Weiberare essentially double walled equipments that feature an inner bladder made up of high grade SUS 304 stainless steel plates and an outer bladder made up of plastic coated A3 steel plates. The equipment uses high-tech insulation system for maximum thermal efficiency. The test chamber also uses a high intensity, high temperature resistant double layered seal between the chamber door and the chamber wall that completely seals off the internal environment from the external environment once the door is closed. The chamber door is provided with an observation window for complete visibility of the test process, allowing real-time observation and analysis.

By keeping track of latest tools and technology, we are specialized in presenting an enormous quality range of Optical Power Meter. Offered Optical Power Meter is manufacture using best quality materials and latest machinery. Offered products can be availed from us at most economical prices.Features: 2 types of backlight modes, manual or outside light intensity, which indicated by LED light red or blue color. Intelligent backlight Reference power level can be set up and stored User self-calibrating function Auto-off function Up to 240hrs battery life

• Brand Name: PARAMOUNT
• Model Number: I2

We are offering Under the supervision of our experienced professionals, we are providing high quality range of Pilling Tester Machine. Specificationsusage: Usage: For testing pilling Condition: New Widely demanded in laboratories and textile industries Features: Strong construction Excellent performance Longer service life

• Application: Motorcycle
• Brand Name: Sarv
• Model Name/Number: MDX-700PH
• Weight: 0.52kg
• Detachable Test Lead: 50cm/2
• Screen Size: 76mm x 39mm
• Clamp Size: 90mm

We offer Unevenness Tester.

• Weight: 1.150 gm
• Dimention: L-120mm, W-80mm, H174mm

* Easy to operateuse. * Easy to install in AutoTaxi. * Bright Large Seven Segment LED Display. * 3 Displays for Fair, Distance and Wating Time. * Real RTC for Real Time * Automatic Fare Change for Day and Night. * Automatic Distance and Time Fair Calculation. * Optional RS232 Communication Port. * Magnatic Sensor.

• Waranty :: 12 Months
• Brand:: Cedar Japan

The best for everyday check if an air tool. It is convenient for torque measurement of air driver of a torque control. LCD display 4 figures Below counter Joint for Measurement RS232C output Auto power off. Display zero clearance Battery drive

• Feature: Large easy to read digital display,Convenient mini size with protective rubber holster and tilt stand,Data Hold locks reading in the display
• Warranty: 2 Year
• Weight: 153 gm
• Model Name/Number: MN36
• Brand: Extech
• Dimension: 138x72x38 mm
• Power: 2 x AAA batteries

• Voltage: 230VAC
• Weight: Upto 200 Kg
• Brand Name: Shambhu Nath & Sons
• Phase: Single Phase
• No. Of Pumps: Single
• Surface Finsih: Powder coated
• Frequency: 50 Hz
• Pressure: 0-100/160/250 Bar

• Brand Name: Froilabo
• Power: 208/230V-50/60Hz-10A
• Temperature range: 0 DegreeC to +60 DegreeC
• Humidity Range Regulated: 5% HR to 95% HR

• Working Pressure: 5-12Kgf/cm
• Spark Plug Size: 10,12,14,18 mm
• Input Voltage: 220 V
• Dimensions: 49*28*26 cm
• Weight: 10.2 Kg

Spark Plug Tester & Cleaner for Cars & LCV's Separate plug Cleaning chamber consisting of an abrasive system connected to double acting valve for blasting and subsequent cleaning to remove the abrasive and dust. Different rubber adopters provided for cleaning plugs of 10mm, 12mm, 14mm and 18 mm sizes. Twin testing chamber connected to the compressed air system for charging the chamber with the necessary control device. Pressure Regulator is provided for reducing any excess air and releasing pressure in the chamber.

Ph Meter (EE-011) APPLICATIONS OF pH Meter Digital Tanco pH Meter is a device that is used in medical and scientific laboratories for measuring acidity or alkalinity of the water based solutions A pH meter is a scientific instrument that measures the hydrogen-ion activity in water-based solutions, indicating its acidity or alkalinity expressed as pH. pH meter is of prime importance in Pharmaceutical, Food, Beverages, Diary and various other industries where human consumption is considered. It is also used extensively in Hospitals Tanco lab Products has supplied to various industries all over India and also exported to various other countries of the world SALIENT FEATURES & CONSTRUCTION OF pH Meter Digital It has a 3.5 digit LED Resolution Display. Value - 0.01 pH to 14 pH Accuracy 0.01 pH & +/- 1 mv Temperature compensation 0 to 100°C (manual) complete with combined electrode with BNC Connector, buffer solutions Electrode stand. Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.

• Type: Pulse Oximetry Monitor
• Material: Pl, PVC
• Certification: CE Certified, ISO Certified
• Application: Medical Use
• Weight: 0-50gm, 100-150gm, 150-200gm, 50-100gm
• Color: Black, Blue, Cream, Gray, Red, White
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Material: HDPE, LDPE, Plastic, PVC
• Driven Type: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year, 2Years
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• Application: Industrial,Domestic
• Color: Black,Grey, White
• Warranty: 0-6 Month, 6 Month-1 Year
• Voltage: 10 V,20 V,30 V,40 V
• Power Source: Electric
• Packaging Type: Corrugated Boxes,Plastic Bags