Testing Equipment Dealers in Vishnu Garden, Delhi

• Voltage: 240V
• Country of Origin: Made in India
• Test Area: 100 cm2
• Usage/Application: Cement Testing
• Material: Mild Steel
• Phase: Single Phase
•  :  

We offer scientific instruments. Heavy Double walled inner chamber made of Stainless Steel & outer Made of Thick mild sheet. Provided With 4 nos. perforated stainless Steel Shelves .With double door, inner made of transparent full view Glass & Outer door is double walled metallic properly insulated With Glass wool. Temperature Range 0°C to 60°C ± 2°C & Controlled by Digital temperature Indicator & Humidity Indicator cum Controller. Humidity will be maintained upto 40% To 95% with Accuracy ± 5 %.Humidity is generated through of Water Reservoir Placed in The lower side Portion of the chamber.Cooling is done with ISI mark compressor of KILOSKAR make Which is connected to thick copper coils placed in the rear of the Chamber through condenser, fan, motor, capacitor, relay etc. whole Cooling unit is placed below the main chamber in a GI housing. CFC Free, Environmental friendly. Heating is done with ISImark Strip type heaters placed near the Cooling coils. Air is circulated by 2 nos. ISI mark Silicon binded motors, which are connected to Balanced blowers, which operates alternatively & continuously with Heating & cooling. Provided with On/Off switch, indicator. 455x455x710 mm 605x605x605 mm 605x605x910 mm

• Type: Friction Tester
• Certification: ISI Certified, ISO 9001:2008 Certified
• Color: Blue and Grey
• Feature: Easy To Use, Proper Working, Superior Finish
• Condition: New
• Warrenty: Lifetime Buyback Warranty
• Brand Name: Paramount
• Country of Origin: India

Co-Efficient of Friction Tester – Digital reveals the stack ability of plastic films. It helps prevent accidents due to friction in packaging, loading, transportation of materials etc. Friction could result from uneven film thickness, which leads to uneven film strength. Coefficient of Friction Tester is applicable in coefficient of friction test to plastic films, foils, paper and other materials Paramount Co-efficient of Friction Tester i9™ (DIGITAL), or COF, is determined by the ease with which two surfaces slide against each other. The dimensionless value of the coefficient of friction is the ratio of the force required to slide the surfaces to the force perpendicular to the surfaces A lower friction coefficient indicates that the surfaces are slicker that means there is less resistance to the sliding motion

• Weight :: 450gm
• Dimension :: L-158mm, W-49mm, H-73mm.

Easy to install & operate. Accurate reading. Display of total distance traveled. Display total fare to pay. Export quality digital taxi fare meter. Bright seven segment LED display. Auoto fare change for day & night. Magnatic sensor.

• Type: SOLAR TOOLS

• Brand Name: Flexon
• Color: Blue
• Condition: New
• Certification: test certificate provided after testing
• Pipe Material: MS hydraulic hose pipe
• Model Name/Number: TRM/BKM/2
• Packaging Type: Wooden Box
• Display Type: Analog
• Grade: Automatic
• Supply: AC

• Brand Name: Fastball
• Color: Sky Blue
• Condition: New
• Automatic Grade: Fully Automatic
• Power Source: Battery
• Application: Industrial Use
• Feature: Easy To Use, Proper Working
• Temperature Capacity: Medium Temperature
• Type: Network Cable Tester
• Country of Origin: India

We are an eminent and leading trader of test equipment heat sink products:- all kind of bts and ibs installation material hutch plate ,cable entery plate,sleeves, boots end caps, multi core termination kit, feeder clamp, earthing kit, weather proofing kits, etc earthing kits tools: -earthing kits, spanners, torque wrench, straight, panel jack receptacle wrench, burners, wire wrappingunwrapping, cutting, crimping,striping tools and water proofing kit.

• Power: Electronic
• Usage: Universal Testing Machine
• Compressor: DC Compressor
• Features: Precise control of temperature and humidity, Castor wheels for ease of mobility
• Temperature Range: 20°C to 60°C
• Temperature Accuracy: ± 0.2°C
• Warrany: Free parts warranty for 12 months

The company is the chief Stability Test Chamber manufacturer, exporter, and supplier in india. Our stability test chambers are used for conducting studies for stability and shelf life on drug and drugs substances. Moreover, the stability test chamber is extensively used in cement plants, seed testing, testing on electronic & mechanical components, biological studies, packaging industries. The inner chamber of our stability test chamber is fabricated with stainless steel.   Construction Inside walls are either of anodized aluminium or stainless steel as desired and outside is of mild steel Finished with white stove / enamel paint Insulation is of 65 mm thick glass wool Humidification is caused by steam vapors Humidity range from ambient to 100% r.h. Is controlled by a humidistat / contact thermometer (accuracy +- 5% r.h.) Dry temperature ranges from 10 oc to 65 oc with an accuracy of +- 1oc controlled by thermostat Correct temperature is as read on glass thermometer It is provided with a full view double glass door. Suitable to work on 220 volts a/c 50 cycles

• pH Range: (0.00
• Power: Universal Power Adapter(12V DC, 1 .OmA)
• Parameters Measured: pH/mV(ORP)/ Deg C
• mV Range: (0-1599.9)mV
• Temperature Range: 0.0
• pH Resolution: 0.01PH
• mV Resolution: 1mV
• Temp. Resolution: 0.1 Deg C
• pH Accuracy: ± 0.02ph± 1bit
• mV Accuracy: ± 1%(FS)
• Temp. Accuracy: ± 0.1 Deg C± 1 bit
• Input Resistance: 1x10 Deg A
• Input Current: 1x10 Deg A
• Stability: (± 0.05pH± 1bit)/3h
• Temperature Compensation: Manual (0.0
• Display: LCD, Dual Parameter
• Communication Interface: RS-232
• Dimension(mm): 220X160X65
• Weight(Kg): 1.5

With the aid of the TVE 3000, vacuum cleaner tests can be carried out more cost-effectively than in accordance with the standard EN 60312. In addition, it is possible to distinguish the separation behavior of vacuum cleaners with bags and vacuum cleaners with bags and HEPA end filters reliably with with dust or as an option with salts – e.g. NaCl or KCl within the salt generator AGK 2000. The dust disperser RBG 1000 that is used operates much more uniformly than is required in the standard and therefore delivers an optimized dust application, which is a prerequisite for exact measurements of separation efficiency with a particle measurement device. With the particle measurement system Promo® 2000 with the aid of the welas® 2300 aerosol sensor in the clean gas, the emissions of a vacuum cleaner can be measured in accordance with the standard. As a result, not only is it possible to accurately compare vacuum cleaners, but the individual filter stages can also be reliably assessed. With the particle measurement system Promo® 3000, users have access to a high-resolution aerosol spectrometer for virtually simultaneous determination of the particle size distribution and the particle concentration in the raw gas and in the clean gas. The welas® 2070 aerosol sensor accurately determines the measurement in the raw gas, while the welas® aerosol sensor 2300 performs the measurement in the clean gas, allowing the fraction separation efficiency of vacuum cleaner bags and HEPA end filters to be performed.

• Feature: Ruggedness, Reliability and Accuracy

• Brand Name: ALC Smart
• Warranty: No Warranty
• Material Type: Alcohol Tester

Features : Advanced Flat – Surfaced Alcohol Sensor Quick Response Smart Mcu Control Direct Testing Process Lcd Indication Digital Lcd Display With Light Blue Backup Protable And Fashion Design Audio Warning Pre- Set Limit Sensor Fault Self Checking Battery Saved Design, Low Voltage Indication Applicable To Driving And Dangerous Work

• Driven Type: Battery Operated
• Feature: High Accuracy
• Type: Temperature Recorder, Automatic Temperature Recorder
• Temperature Range: 1-200 Deg C

Temperature profiling products through a heat treatment, finishing, or firing processes is achieved by attaching thermocouples to the critical points of the product, connecting these probes to a Data Logger, and by protecting the Data Logger with a Thermal Barrier, the whole system can travel through the heat treatment process together with the product.

• Application: Industrial Use
• Color: Grey
• Feature: Four Times Stronger, Sturdy Construction
• Frequency: 50hz
• Tensile Strength: 100-125Mpa
• Phase: AC Single Phase, AC Three Phase
• Temperature: High Temperature, Low Temperature, Medium Temperature

• Overall Weight: 5-20 Kg 20-45 Kg
• Usage: Hardness Testing, Laboratory, Steel Industry
• Type: Portable Hardness Tester
• Brand Name: SONA TESTING INC.
• Material: Mild Steel
• Certification: ISO 9001:2008 Certified
• Voltage: 110V
• Display Type: 3 VOLT DC
• Warranty: 1 Year
• Country of Origin: India
• Corrosion Resistance: No
• Operating Type: Automatic
• Low Battery Indicator: Yes

We offer ric thickness tester. Stiffnesstester i2

asphalt testing equipments, soil testing equipments, Thickness Gauge

• Accuracy: +/-0.5%
• Flow Rate: 20-200LPM; 25-250LPM; 30-300LPM
• Maximum Viscosity: 1000 CPS
• Indication: LCD Digital Display
• Totaliser: 7 Digit ( Non resettable)
• Resettable Totaliser: 5 Digit
• Inlet & Outlet: 25mm/1"; 40mm/1.5"; 50mm/2"

• Country of Origin: Made in India
• Voltage: 230 V AC
• Brand: Minimac
• Precision: +- 3%
• Model Name/Number: Veggo/Matic
• Usage/Application: Industrial
• Phase: Single Phase
•  :  

INNOVATIVE Digital Tablet Dissolution Test Apparatus isas per usp/ip/bp specifications and supports 1,2,5,6 methods. Single station, three, six, eight or 14 station wobble and vibration free instrument is available. The instrument has built in memory to store 95 test methods with 18 different time intervals.

Highly Stable and Accurate 3 ½ digit LED Display Rugged and Reliable design Cell constant adjustment facility

• Material: Brass
• Display: Digital
• Size: All size
• Brand: ABB,Rosemount
• Packaging Type: Box
• Usage/Application: Industrial
• Warranty: 1 Year

• Features: Cost effectiveness,Easy to use,Accurate dimensions,Durable
• Location: Pan India
• I deal In: New Only
• Packaging type: Standard
• Pressure: Standard

• Material: Metal
• Brand: RAJCO
• Color: Blue
• Country of Origin: Made in India

• Type: Ph Meter
• Certification: ISO 9001:2008
• Color: Brown, Grey, Maroon, White
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic, Fully Automatic
• Body Material: Plastic
• Power Source: Battery
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year

Aggregate Impact Tester that we offer is used by various industries for testing the aggregate impact value. The Aggregate Impact Tester is equipped with a circular base with two vertical guides. Aggregate Impact Tester machine which is available with us is fabricated using high grade raw material and advance technology. FeaturesHammer with a locking arrangementHammer is removable for emptying as it falls freely to the baseFalling height of hammer is adjusted through 380 ± 5mmSupplied complete with metal measures 75mm dia x 50mm high (for specimen preparation) and tamping rod 230mm long x 10mm diaHigh performanceWeight of hammer : 13.75 ±0.25 kg ApplicationsCeramic industryCalibration laboratoriesTest house

• Weight: 1.150 gm
• Dimention: L-120mm, W-80mm, H174mm

* Easy to operateuse. * Easy to install in AutoTaxi. * Bright Large Seven Segment LED Display. * 3 Displays for Fair, Distance and Wating Time. * Real RTC for Real Time * Automatic Fare Change for Day and Night. * Automatic Distance and Time Fair Calculation. * Optional RS232 Communication Port. * Magnatic Sensor.