Testing Machines Dealers in Kirti Nagar, Delhi

Bituminous surfaces exposed to varying temperature conditions undergo expansion & contraction. So an important characteristic of the binder is its ductility & the degree of ductility has an effect on the cracking bituminous surface due to traffic stress.The ductility of bitumen is expressed as the distance in centimeters to which a standard briquette can be elongated before the thread thus formed breaks under specified conditions.

Universal Hardness Testers, equipped with a set of six ball bearings guide device, for the plungerspindle, automatic load selection for 15, 20, 30, 40, 45, 50, 60, 100, 125, 150, 187.5 and 250 kg for conducting Vickers, Brinell, Standard Rockwell and Superficial Rockwell method tests.

• Weight: 1-5 Ton, 100-1000kg, 1000-10000kg, 10000kg-1 Ton, 5-10 Ton
• Voltage: 110V, 220V, 380V, 440V
• Condition: New
• Application: Testing
• Automatic Grade: Automatic
• Power: 10-15kw, 15-20kw, 3-5kw, 5-10kw
• Warranty: 5 Years

Applications : A wide variety of tests can be conducted on this machine viz. Tensile, compressive, transverse, Peel test for adhesive tapes The material, like rubber, plastics, ferrous metals, non ferrous metals, etc. can be tested as per different standards The test specimens can have a number of forms like round, flat, threads, wires, dumbells, fabric, belts, straps, ropes, etc. or sometimes components directly also can be tested In order to cater to this variety of forms, shapes and materials, a range of grips can be offered Description : The computer controlled universal testing machines are rugged, versatile, user friendly, accurate and can test a variety of material A wide choice of grips are available to suit the application The windows based software is comprehensive and covers most of the applications The automatic calculation of parameters from the observed test values, real time graphs, storage and retrieval of data are immensely useful The state of art electronics, high quality material used, and the user friendly software makes the machine reliable and user friendly The machine comprises of a rigid assembly of lower table and top plate connected by guide rods The two ball screws (One on left and the other on right) also are mixed in this assembly The crosshead, in the center, houses the nuts of the ball screws The entire assembly is fixed on the base, which accommodates driving arrangement base A set of bellows protects the ball screws from ingress of dust The interface and computer are placed on a computer table by the side of the machine : Standard Accessories Basic machine along with one load cell and a pair of compression plates. Windows based on users friendly software. Salient Features Method of loading by re-circulating ball screws. AC servo motor for precise crosshead control with infinitely variable drive. Load measurement by load cell Over travel safety by fixed and settable limit switches at both ends. Overload protection for load cell by electronic control Single from windows based user friendly software Test data and reports are stored in access database User programmable strain rates in many steps User can select results from available result list for report User defined reports User can select test from templates and can start similar test Variable sample break detection. Tare load and reset elongation facilities available Load and Elongation is continuously displayed on screen Statistical output for a batch in report Simultaneous display of two graphs is possible in real time testing On line display of load and displacement (Stress, Extension, strain) etc. while test is conducted. Real time graph of load and Elongation, load and time, stress and strain is displayed and is auto scaled User selectable units for load and displacement (N, kg, kN, lbf, mm, inch, etc) Report can be printed on any printer with two graphs Large storage space for storing test data and results Provision of calculation of Load and Elongation at yield, peak load and load at break, Yield stress, Ultimate stress, etc. Specific software for tensile, compression, shear test and other tests. If Electronic Extensometer is used then proof stress values from 0.1% to 1% can be determined. Software will give alert to user to remove extensometer when load crosses the proof load value In order to cover wide load range, more load cells can be supplied (optional), In that case has to select the load cell for test Standard load resolution is with 10,000 counts. Finer resolution with 20,000 or 50,000 counts can be offered (optional) Other slower cross head speed on specific request (optional).

We manufacture, export and supply Los Angeles Abrasion Testing Machine. The Los Angeles Abrasion Testing Machine is used in testing crushing rock, slag, & crushed & uncrushed gravel for resistance of abrasion. Our Los Angeles Abrasion Testing Machine is precisely designed in numerous specifications strictly in compliance with IS standard. It consists of cylindrical drum mounted in stand with dustproof cover to keep the material within the drum under test. The machine works on 440V AC input and is well acclaimed for its high efficiency.

Tile Abrasion Testing Machine-VSLIC5024 Product Description This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thicknessgauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counteris Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On request machine to operate on 230 V A.C. Supply can also be supplied.

This is apparatus is used to determine softening point of bitumen, Ring and ball apparatus is used to determine softening point. It is that temperature at which a sample of bituminous material loaded by a 9.5mm dia.-steel ball, drops at a distance of 25mm. The apparatus consists of steel bracket with a sliding plate support. That support has two holes of 10mm dia. on which a Ring and Ball guide can be kept. A central Hole on this plate is for inserting thermometer. Supplied with a glass beaker approximate 8.5cm I.D., 12cm high and a hand stirrer and 2 nos. 9.5mm dia. steel balls.

Our Portable exhaust emission analyzer MEXA-584L,is used for measuring and testing the emssion sample for various components like Co,Hc,Co2,o2,No,Lambda,AFR,RPM,Oil Temperature.The application varies from Vehicle Exhaust,Engine Exhaust,Genset application,PUC Testing and various emissions.

• Material: Stainless Steel
• Max Cutting Thickness: 0.5-0.7mm

We are amongst the leading manufacturers and suppliers of strip cutting machine which is extensively used for cutting the diagnostic test sheet, plastic & leather into strips of accurate size. We are here to serve you with the best diagnostic test sheet, plastic,leather, cosmetic strip cutting machine for hassle free & ease operation for any industrial application. Using strip cutting machine one can carry out different kinds of test strip, plastic and leather, non woven in accurate sizes that saves your precious time and manpower. We are known as quality driven strip cutting machine manufacturer and supplier, established in india.

• Application: Compression testing
• Automation Grade: Automatic
• Brand Name: Vertex
• Display Type: Digital
• Material: Stainless Steel,Metal
• Piston Stroke: 215.00 mm
• Standard: IS 14858(2000)
• Display: Digital
• Platen Size: 220 mm sq.
• Minimum Order Quantity: 1 Set

Testing Machine: The machine has two rate of travel, namely 5 cms per minute and 1 cm per minute. A clutch arrangement is provided by which the movement of the movable bracket can be arrested or restarted without switching off the motor. A scale on the top edge of the bath makes it easy for the operator to observe the progress of the test. Machine accommodates three individual specimens. A quick release mechanism permits the operator to move the carriage to any desired position on the track. An automatic cut off prevents over runs. Immersion heater also provided. A three wire cord with plug is furnished with the bath. The control panel is recessed. Controls consist of a temperature, an on-offline switch which controls all power to the bath, and pilot light which indicates when the heater is energized. Operation on 230 volts, single phase, 50 cycles, A.C. supply.

• Weight: 100-200kg
• Voltage: 110V, 220V, 380V
• Automation Grade: Automatic
• Driven Type: Electric
• Weight: 1800 kg
• Automation Grade: Automatic
• Type: Impact Testing Machine
• Color: White
• Application: Industrial Use
• Power: 1-3kw, 3-6kw, 6-9kw
• Warranty: 1year
• Certifications: ISO 9001:2008
• Dimensions: 54*280 mm
• Type: Manual
• Power: Electronic

• Structure Area: (L) 900mm x (B) 600mm x (H) 900mm
• Structure: M.S Angle & M.S Sheet
• Maximum Ampere: 800A
• Tank & Tray: Tank 10 ltr., Tray (M.S)
• Lamp with Hock: 125 Watt
• Pneumatic Control: Pneumatic Cylinder and Liver
• Control Panel: Ampere meters, Contractors, MCB, Indicators, Timers, Boot Switch, Rotary Switches
• Features: Well tested, Resilient, Economical price, Convenient rates, Low power consumption, Efficient

• Material: MS
• Country of Origin: Made in India
• Capacity: 50 KN TO 3000 KN.
• Power Supply: 220/ 440V
• Usage/Application: COMPRESSION LOAD TEST
• Brand: STARK EMBSYS
• Display Type: Digital
• Phase: 1PH/ 3 PH.

These testing machines are used for test the mine pore and max pore in filter paper dry and wet both. Our highly efficient testing instruments are built with premium raw materials as per the industry norms. We, with the assistance of our qualified team of experienced professionals, deliver our sophisticated products within a given period of time.    

• Voltage: 230V AC
• Power Source: Electric
• Usage: Wire Testing
• Brand Name: Billionix
• Frequency: 50Hz
• Warranty: 1 Year
• Humidity Range: 50%

• Application: Hospital

Spring Load Testing Machine, Compression Springs, Tension Springs

Ductility Testing Apparatus, Accelerated Curing Tank, curing tanks

Torsion Testing Machine, Hardness Testing Machine, CNC Wire Forming Machines

Tensile test apparatus to conduct tension test on suspension system of Ceiling Fan as per Cl. 14.13 of IS: 374-1966. The apparatus should have arrangements of holding one end of the suspension system with a tension load upto 1500 Kg. at the other end.   Specifications:   Capacity: As per requirement. Ranges: As per requirement. Accuracy: Within +/- 1% between 10% & 90 of the scale. Traverse Speed: 20 m.m. per minute 250 +/- 50 m.m. per minute. Grip separation Minimum: 20 m.m. Grip separation Maximum: 500 m.m. Grips: Two pairs for metal specimen, one pair for plastic specimen (Total: 3 pair of grips) Grip Capacity: 1. For metal specimen: Self-tightening type, with capacity to hold wires of up to 10 m.m. dia, flats of 20 m.m. Width 2. For plastic specimen: Self-tightening type with exocentric roller, Knurled to hold up to 30 m.m. width specimens. Power requirement: single phase 220 Volts, 50 Hz, AC Over travel safety Switches: Limit switch will be provided for top and bottom positions. Indicators : ‘ON’ ‘OFF’ ‘UP’ ‘DOWN’ mains indicator will be provided elongation Scale will be provided.

Material Testing Machines

Material Testing Machine, Traders Fibre Glass

Gold Testing Machine, computerized engraving machine, Engraving Machine

analytical testing machines, Solvents, laboratory equipments solvents

Cube Testing Machine, lab testing instruments, MATERIAL TESTING INSTRUMENTS

durability testing machine, CNC Forming Machine, Sheet Metal Component

scratch resistance testing machines, Universal Testing Machines

Spin-On Filter Impulse Testing Machine, Box Type Oven, Industrial Curing Oven

Testing Machines, Hardness Testers, Drilling Rigs, pellet testing equipments