Testing Machines Dealers in New Rohtak Road, Delhi

• Voltage: 220-440 V
• Automation Grade: Semi Automatic
• Brand Name: Steco
• Material: Mild Steel
• Application: Flexure Testing
• Capacity: 100 KN
• Roller Distance: 600 mm

• Finishing: Color Coated
• Color: Blue, White
• Condition: New
• Power Source: Electric
• Automation Grade: fully automatic
• Application: Industrial
• Feature: Corrosion Resistance, Fine Finished, Good Quality, Good Strength, Long Service Life
• Voltage: 220 V
• Packaging Type: Wooden Box
• Type: Automatic Compression Testing Machine
• Frequency: 50-60 Hz
• Country of Origin: India

• ACCESSORIES: Thickness Measurement Jig with 0.01 mm x 25 mm dial gauge.

It is used for determining the resistance of flooring tiles to wear or abrasion. It consists of the following :- i) A grinding disc furnished with a replaceable grinding path and rotating horizontally about its vertical axis. ii) A circular tray enclosingthe grindingdisc. iii) Holding device for test specimen. iv) Reduction gear coupled to a motor for operation on 220 v, 50 Hz, single phase supply. v) Revolution counter. (Preset cumulative).

• Type: Izod Impact Testing Machine
• Power: Electronic
• Usage: Impact Testing Machine
• Application: plastic impact test
• Packaging Type: Corrugated Box
• Certification: Corrugated Box

• Type: Compression Testing Machine
• Certification: CE Certified
• Application: Testing Material
• Weight: 100-200kg
• Color: Blue
• Voltage: 220V
• Condition: New
• Automatic Grade: Manual
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Country of Origin: India
• Brand Name: AMK
• Function: Manual, Automatic, Semi Automatic

For the determination of resistance of aggregate to wear by abrasion. Two hollow cylinders, closed at one end and provided with tightly fitting covers at the other end. The inside diameter of the cylinder 20 cms and 34 cms depth. The cylinders are mounted on a shaft at an angle of 30° with the axis of rotation. The shaft rotates at 30-33 rpm through a reduction gear, coupled to a motor. Suitable for operation on 440 volts, three phase, 50 cycles, AC supply. Supplied complete with a counter and push button starter. With 12 nos cast iron spheres or steel spheres (steel balls) hardened, approx. 48 mm in diameter, each weighing 380-445 gm.

Veekay Industries offers specifically designed Box Compression Testing Machine to quantify the container performance. This would ultimately cause the effect of various board mediums, closures and interior partitions to be plainly compared by means of Load & bend analysis. We proudly announce that our well designed Box Compression Testing Machine is manufactured and delivered to cater to the specific requirements of the various packaging industries. Features Digital display of the test numbering and initial pressure.Single phase power supplySpecific design

For metals: Reverse Bending, supplied complete with jigs and fixtures mounted anelegant table with motor, weights, etc. An electronic Digital Revolution Counter registers the number of revolutions taken by the sample to break. The machine automatically stops after the rupture of the specimen

In flexible pavement construction, bitumen binders are used. It is important that bituminous material forms ductile thin film around the aggregates, Which serves as a binder. The binder material not of sufficient ductility renderspervious pavement surface and leads to development of cracks. Therefore it is important to carry out the ductility tests on bituminous material. Ductility is defined as distance in cms to which a standard briquette of bitumen can be stretched before the thread breaks. The briquette is stretched at a rate of 50mm/minute ±25mm per minute at a temperature of 27ºC ± 0.5ºC.The apparatus consists of a water bath with a thermostatic heater, and a circulating pump to maintain uniform water temperature. One half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch. The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath. A pointer fixed to the carrier moves over a scale graduated from 0-110 cm x 1mm fixed on the bath with “0” (zero) of the scale towards the fixed plate side. The rotating shaft has 2 speeds of travel for the bracket, 5cm/min and 1 cm/min., selected by a clutch. Water bath inside is aluminium, it is an insulated water bath. Water bath is provided with a drain. A heater with thermostatic control is fixed inside the water bath. Control switches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath, complete with three briquette moulds and one base plate, all made of brass. Operates on 230 volts A.C. single phase.Accessories : 1. Thermometer IP 38 C, range 23ºC to 27ºC. 2. Ductility mould with base-plate.

• Country of Origin: India
• Certification: CE Certified
• Weight: 100-500kg
• Color: Brown
• Voltage: 220V
• Driven Type: Electric
• Warrenty: 1year
• Type: Digital CBR Testing Machine
• Power: 3-5kw
• Brand Name: U Test
• Application: Industrial

We offer to our customers a superior quality Fatigue Testing Machine. Fatique Testing Machine can be be used to simulate how a component/material will behave/fail under real life loading/stress conditions. They can incorporate tensile, compressive, bending and/or torsion stresses and are often applied to springs, suspension components and biomedical implants. We customized Fatigue testing machine as per the drawing and requirement of our clients

Used for testing crushed rocks, crushed slag, crushed and uncrushed gravel fro resistance to abrasion. The machine consists of a hallow cylinder mounted horizontally on a sturdy frame on ball bearings. There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test. A detachable shelf which extends throughout the inside length of the drum which catches the abrassive charge and does not allow it to fall on the cover. The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 r.p.m. A revolution counter is fitted to the frame. A tray is supplied for collection of the material at the end of the test. Complete with abrassive charges consisting of a set of twelve hardened steel balls, approximately 48mm dia. Suitable for operation on 440 volts, 3 phase, 50 cycles, A.C. supply

• Power Type: Electric
• Automatic Grade: Automatic

We are offering shear testing machine. item code: torsion-testing-machine backed by the pioneered associate professionals having a high experience in this domain, we have emerged as a leading industry involved in the manufacturing shear testing machine. These machines are quality approved that are in accordance to the given industrial specifications and laid norms. features: high performance seamless finish precisely-engineered cost-effective optimality specifications: unique 'talon-claw' grips for round and flat specimens torsional speed of 0.10.2 rpm torque compensated motors maintenance free gear box auto range selection with range selector wheel 3 or 4 torque ranges for higher accuracy load-unload capability variable speed drive

• Material: Cast Iron
• Voltage: 440 V
• Features: High Stability,Self Aligning,Platen Suitable for Testing Cubes and Cylinders of various sizes,
• Cylinders Height: 100 mm x 200 mm ht.& 150 mm dia. x 300 mm
• Phase: 3 Phase
• Power Supply: AC Supply
• Product Type: Testing Machines