Testing Machines Dealers in Pitampura, Delhi

We are offeirng testing machines etc.

• Voltage: 230VAC
• Weight: Upto 200 Kg
• Brand Name: Shambhu Nath & Sons
• Phase: Single Phase
• No. Of Pumps: Single
• Surface Finsih: Powder coated
• Frequency: 50 Hz
• Pressure: 0-100/160/250 Bar

we are offering tensile testing machine. it is based on the constant rate of traverse (crt) principle. the sample is held between two jaws; the upper one is a stationary jaw while the other end is made to move at a known fixed speed with the help of motor, gear box and lead screw arrangement. the load exerted on the stationary jaw is sensed by a sensor connected with load cell which directly indicates the load in digital form in newton and kg.

• Type: Universal Testing Machine
• Certification: Iso 9001:2008
• Weight: 100-1000kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Application: Testing
• Automatic Grade: Automatic
• Power: 1-3kw
• Warranty: 1 Year

WEIBER has designed customized Vibration test system to meet the generalized testing requirements of various segments of industry and research institutions like Automobile, Electronics, Telecom, Lighting,Aerospace, Packaging,DRDO and Atomic research centre. We are manufacturer of electrical vibration series products, adopted the 'double-magnetic circuit ‘ can be completed in X, Y, Z three axis sinusoidal vibrationtest and broadband random vibration tests, to be completed by the classical (half - sine, trapezoidal, saw tooth wave) pulse and shock response spectrum test.

• Country of Origin: India
• Weight: 10-50kg
• Color: Light White
• Voltage: 220V
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Automatic
• Type: Testing Machine
• Certification: CE Certified, ISO 9001:2008
• Application: Industrial
• Power: 1-3kw
• Brand Name: SHIVAM
• Condition: New
• Power source: Electric

we offer a complete range of tablet disintegration test machine. this instrument is designed for accurate estimation of disintegration time of tabletscapsules. our disintegration test machine is assembled in painted sheet metal cabinet with chemical resistant epoxy coating, fitted with superior quality constant speed sturdy motor. the guide discs and strokes are confirming to pharmacopoeia standards. we are a reputed name when it comes to the foremost disintegration testing machine suppliers. features : digital timer with time hold facilitywater bath for maintaining temperaturedigital temperature controller with water bath.

• Thermometer IP 38C Range:: 23° C to 27° C
• Ductility Mould with Base Plate -: 3Nos.

The ductility of bitumen is expressed as the distance in centimetres to which a standard briquette can be elongated before the thread thus formed breaks under specified conditions. A molten bitumen sample is poured into a standard mould, allowed to cool to room temperature and then placed in a water bath so that the briquette can be brought to test temperature before mounting in the testing machine.

An Important factor to be considered to test the quality of aluminum cast in checking for the presence of bifilm. Bifilms are oxide layers formed during solidification on the surface of the melt. The presence of bifilm can be identified by porosity testing. When the metal is poured or stirred the bifilm layers formed at the top of the melt folds and drowns in the melt. Presence of bifilms in the melt can results in cracks after solidification. This results in low strength areas. During porosity testing, low-pressure environment is induced this causes the bifilms to expand because of positive pressure in the bifims. Once the melt solidifies, it can be cut to check the size of the pores formed. Bifilm index also indirectly measure hydrogen content in the cast. Porosity testing cannot independently identify hydrogen content as bubbles will not form without the presence of bifilms. It should be noted that porosity forms even without the presence of hydrogen, but the pore size can increase under high hydrogen concentration. Correlation between the properties of the aluminum with the bifilm index have been previously made by empirical tests. The general idea is as bifilm index increases toughness decreases. For a 40x55x15 mm cast a good rule of thumb is a bifilm index of 10mm represent a good quality of the cast, 10- 50mm represents adequate quality and anything above 50mm is considered low in quality.     Technical Specification: Max Pressure = -0.8 bar/-25 in Hg Motor               = 0 .25 hp    

ultrasonic testing machine, consultant quality certification services

Ultrasonic Testing Machines, QUARTZ SINGLE DISTILLATION

plastic testing machine, ac high voltage tester

Load Testing Machines

Ctm Testing Machine, Ctm Testing Machine