Textile Testing Equipment Dealers in Saket, Delhi

• MOTOR SPEED: 0 TO 1500 RPM (APPROX)
• EQUIPMENT WEIGHT: APPROX. 2KG
• TPI RANGE: 1 COUNT FOR TPM/0.250 COUNT FOR TPI

Clamp the yarn in the clamp fixed on the motor shaft. A guide is provided on the clamp for easy clamping. Pull the other end of yarn through the clamp on the moving crosshead had while clamping ensure that yarn is clamped for proper test length and yarn is free and under correct tension of weight. This is necessary to have uniform length of yarn between the clams under fixed tension to get proper repeatability of the results. Select SZ switch in S or Z position depending upon type of yarn. Put the main switch ON and press the ‘RESET’ push button to ensure zero reading on the digital display unit. Select the motor speed to high speed position. Select ‘NORMAL’ position for initial operation. Start the motor using ‘START STOP’ switch. The motor will now start untwisting the yarn and DIGITAL DISPLAY will start counting. After reaching approx. 90% of expected TPM reading, it is recommended to lower the motor speed to minimum possible to get better results. By using ‘ADJ knob’ the motor can be run in very slow to moderate slow speed, or if motor stops completely test can be run manually by pushing motor shaft by hand.The instrument carries a guarantee for 12 month for free repairs against any manufacturing defects. However this guarantee is void in case of any physical damage or attempted repairs at customer’s end. The instrument is required to be sent to our works at customer’s expenses for claiming warranty services.

• Operating Speed: 150 / 160 rpm.

Yarn testing equipment The leas are either imperial leas having a swift perimeter of one and half yards with 80 turns or metric leas having swift perimeters of one meter with 100 turns.The yarn is spread uniformly in a band of 20mm as the leas are formed. Upto 5 - 10 leas can be formed at one time, if the arms of the reel can be docked to facilitate the removal of the leas from the reel. The number of turns is indicated on a counter. In case of motor operated Wrap Reel, a fractional horse power motor controlled by a pre-set counter is provided to give the movement to the reel. An electromagnetic brake is provided to stop the movement of the reel almost instantaneously to reduce the chances of overtravel.

Stiffness Tester, I R Beaker Dyeing Machine, Glass Ware

Crease Recovery Tester, IR Beaker Dyeing Machine, button snap pull tester

Metallic heald frame, Solar Modules, pv solar panels, spinning bobbins

Motorised Wrap Reel, Bundasmann Tester