Thermal Conductivity Apparatus Dealers in Delhi

Product Code: EKE 2318The apparatus consists of a copper bar, which is heated at one end, a heat sink is provided at other end. The test section of bar is properly insulated and thermocouples are attached along the length of bar. Heat conducted through the section of bar is measured by heat collection in water-cooled heat sink. A panel comprising of controls and measurements is provided, which provides easy operation and sturdy mounting of unit. Specifications Metal Bar - 25mm of adequate length, provided with 8 Thermocouples along the length, Band heater at one end and water-cooled heat sink at other end. Test portion of bar is insulated. Instruments panel comprising of. Voltmeter - 1No. Ammeter - 1No. Dimmerstat 0-230v, 2A, capacity. Multichannel Digital temperature Indicator. Measuring flask and stop clock Services Required Bench area of 1.5m. x 1m. at working height. 230 v, AC, electric supply with earthing connection. Water supply at the rate of 2 lit/mm

• Country of Origin: India
• Material: Stainless Steel
• Certification: ISO 9001:2008
• Color: Light White, Off White
• Voltage: 220V
• Condition: New
• Dimension: 300mmx320mmx425mm
• Power: 1KV
• Driven Type: Electric
• Phase: Single Phase
• Warranty: 1yrs
• Temperature: 0-50°C
• Vacuum range: 150-300mm

For determining the relative conductivity of bad conductor material consists of cylindrical slab of brass 11.5cms. In dia and 12mm thick drilled to take thermometer. On this rests a 5cms deep steam chest of the same dia, with inlet and outlet tubes of steam. The apparatus is suspended by strings attached to the lower cylinder with thermometer. On retort stand with rectangular base 200 x 125mm, and rod 600mm long. Complete with one each disc specimens, glass and plastic 3mm and 1.5mm thick respectively, for determining the conductivity of liquids.

• Brand: Linseis
• Model Name/Number: THB-100
• Sensor type: Kapton or Ceramic insulated sensor
• Smallest sample size: 3 x 3 x 3mm
• Maximum Sample size: Unlimited
• Sample consistence: Solid, liquid, gel, powder, granulate

Sturdy construction with hand rotating device in vertical plane. In this experiment, work is converted into heat caused by the friction between two well fitting gun metal cones. The inner cone is fitted with a known quantity of water & thermometer is held stationary (while the wheel is in motion) with the help of counter torque applied to the bigger round wooden disc by cord & slotted weights. A counter is fitted for recording the number of revolutions. A slot is provided in the metallic frame to adjust the belt.

Thermal Conductivity Apparatus, Link polygon apparatus, Plasma Thawing Bath