Thermowells Dealers in Delhi

Type: Barstock, Solid Barstock, Deep Drilled and Machine, Tapered or Straight Hot End Materials: Hexagonal Round AISI 304, 316, 310, 321, 446, Inconel Tungsten Carbide, Cobalt, and Cermeric Coated. Process connection: Screwed: BSP NPT Metric, Thread Flanged: ASTM BSS DIN

• Application: Industrial
• Finish Type: Stainless Steel
• Size(inch): All Size
• Connection: 1/2 inch bsp (f)
• Process: 1/2 inch bsp (m)
• Immersion length: 100 mm
• Total length: 145 mm

Thermowell are provided to protect the basic sensor from the Thermowell material can be brass, SS304, SS316, mechincal damage and corrosion. An extremely sturdy SS316L, SS310, Inconel 600, Inconel 800, Monel, design may increase the life of the sensor but may lead to a Hastelloy depending upon the process parameters and type poor response. Similarly, a delicate design will have poor life of fluid. For proper selection of Thermowell material, expert but will improve the response time. Various Types of Thermowells : Bar Stock Threaded (BT) (Process threads NPT, BSP or Metric) Bar Stock Fanged (BF) (Flanges as per ANSI, BS or DIN) Bar Stock Weld In (BW) Fabricated Threaded (FT) Fabricated Flanged (FF) Fabricated Weld In (FW)

A Thermowell is a protective enclosure for Temperature Gauges and Temperature Sensors ( Inserts), which enhance the life of the Inserts from the corrosive and abrasive( harsh) service conditions at the installation point without affecting the performance of the Temperature Sensors or Gauges. A Thermowell allows the temperature sensor to be removed and replaced without compromising either the ambient region or the process. We at Goa Instruments, strive to provide Thermowells, which suit the Process Parameters like Pressure, Temperature, Density, Viscosity, and Velocity in accordance with International PTC Standards.   Three Major Types of Thermowells. Using Bar Bar Stock Flanged Bar Stock Threaded Bar Stock Weld In   Using Pipe & Bar Fabricated Flanged Fabricated Threaded Fabricated Weld In Bar Stock Thermowells are offered for Insertion Lengths up to 600mm as a Standard. Insertion Lengths can also be provided up to 900mm in Bar Stock if required. Fabricated Thermowells are generally preferred for Insertion Lengths above 600mm. We have a IN HOUSE Wake Frequency Calculator , in accordance with ASME PTC 19.3 TW-2010 for determining the Insertion Length and the Type of Construction best suited for the Process Parameters as required by the Client. Our extensive internal database, on material selection, for the Thermowells ,assist us in recommending and suggesting a suitable MOC for the product which will bring out the Optimum performance of the Thermowells under the process parameters and different types of Process Fluids. We also offer Thermowells with Sleeves, Coatings and Linings customized to suit the Client’s requirements. Thermowells with more than one material as MOC can also be offered for minimizing cost and improving the efficiency, response and longetivity of the Thermowell under harsh and corrosive conditions.

Thermowells For Temperature Gauges & Temperature Elements

Thermowells, catalyst tracking systems, Thermocouples