Tile Abrasion Testing Machine Dealers in New Rohtak Road, Delhi

• Voltage: 220V
• Rated Power: 0.25 To 2 kw
• Brand Name: Steco
• Application: Industrial
• Frequency: 50/60 Hz
• Phase: Three Phase
• Use: Abrasion Tester
• Dial Gauge: 0.01 x 25 mm

• ACCESSORIES: Thickness Measurement Jig with 0.01 mm x 25 mm dial gauge.

It is used for determining the resistance of flooring tiles to wear or abrasion. It consists of the following :- i) A grinding disc furnished with a replaceable grinding path and rotating horizontally about its vertical axis. ii) A circular tray enclosingthe grindingdisc. iii) Holding device for test specimen. iv) Reduction gear coupled to a motor for operation on 220 v, 50 Hz, single phase supply. v) Revolution counter. (Preset cumulative).

• Type: Tile Abrasion Testing Machine
• Certification: ISO 9001:2008
• Weight: 100-1000kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Rated Power: 5-7kw

This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counter is Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On request machine to operate on 230 V A.C. Supply can also be supplied.

Our company is one of the renowned Manufacturers, Exporters and Suppliers of the Tile Abrasion Testing Machine. We manufacture Tile Abrasion Testing Machines from high-quality raw materials and the subsequent quality of the product is also superior. We provide deliveries on time so that the client needs are satisfied with great efficiency. Tile Abrasion Testing Machine is used to determine resistance to wear and tear of the cement and concrete flooring tiles. Parts of the Tile Abrasion Testing Machine Grinding PathRotating Grinding DiscThickness GaugeCircular Tray and BracketCounter Balance LeverFunnelRe-adjustable Pre-set Counter Features Manufactured as per Is 1237 and IS 1706Disc rotations of 30 rpm with a load of 30kgfDeals with tiles specimen of 7.06cm x 7.06cmPre-set counter stops the disc after 22 revolutions. The count can be re-adjusted.Works on 440 V AC three phase electric supply (Can be 230V machine on request)

Deep Abrasion for unglazed Tiles, IZOD IMPACT TESTING MACHINE

Tile Abrasion Testing Machine, subsonic wind tunnel, Colour Matching Cabinet