Tile Abrasion Testing Machine Dealers in Delhi

• Voltage: 440 V
• Brand Name: Sisco India
• Color: Blue and White
• Country of Origin: Made in India
• Usage/Application: Laboratory
• Material: Mild Steel
• Frequency: 50/60 Hz
• Phase: Three Phase
• Display Type: Digital
• Finish: Color Coated

Tile Abrasion Testing Machine-VSLIC5024 Product Description This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thicknessgauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counteris Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On request machine to operate on 230 V A.C. Supply can also be supplied.

• Type: Automatic
• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 220V
• Rated Power: 3-5kw
• Driven Type: Electric
• Warranty: 1 Year

This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7.06cm x 7.06cm is pressed tace wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolutions of the grinding disc the second parallel side of the tile is subjected to wear for similar under of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable. The machine works on 440 volts AC, 3 phase electrical supply.

• Weight: 50 kg
• Country of Origin: Made in India
• Material: Stainless Steel
•  :  

• Weight: 7.5 kg
• Thickness: 220V, 50 Hz, 1 phase

The tile sample is pressed under a specified load against a grinding path, strewn evenly with an abrasive powder, revolving at the rate of 30 ± 1 rpm. At the end of 100 revolutions of the disc, the second parallel side of the tile is subjected to wear for an equal number of revolutions of the disc. The wear of the tile is measured using thickness-measuring device (which is supplied at extra cost). The abrasion-testing machine consists of a replaceable grinding path, fitted on to a disc rotating about its vertical axis. The rotating disc and the grinding path are enclosed by a circular tray. A bracket holds the specimen.

• Voltage: 220V
• Rated Power: 0.25 To 2 kw
• Brand Name: Steco
• Application: Industrial
• Frequency: 50/60 Hz
• Phase: Three Phase
• Use: Abrasion Tester
• Dial Gauge: 0.01 x 25 mm

This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7. 06 cm x 7. 06 cm is pressed tace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolution of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. the machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable. the machine works on 440 volts A. C. , three phase electrical supply.  

• Country of Origin: India
• Type: Automatic
• Certification: CE Certified
• Voltage: 220V
• Rated Power: 1-3kw
• Driven Type: Electric
• Warrenty: 1 Year
• Application: Industrial

This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7. 06 cm x 7. 06 cm is pressed tace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolution of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose.The machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable. the machine works on 440 volts A. C. , three phase electrical supply.

• ACCESSORIES: Thickness Measurement Jig with 0.01 mm x 25 mm dial gauge.

It is used for determining the resistance of flooring tiles to wear or abrasion. It consists of the following :- i) A grinding disc furnished with a replaceable grinding path and rotating horizontally about its vertical axis. ii) A circular tray enclosingthe grindingdisc. iii) Holding device for test specimen. iv) Reduction gear coupled to a motor for operation on 220 v, 50 Hz, single phase supply. v) Revolution counter. (Preset cumulative).

This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7. 06 cm x 7. 06 cm is pressed tace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolution of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. the machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable.  the machine works on 440 volts A. C. , three phase electrical supply

The tile sample is pressed under a specified load against a grinding path, strewen evenly with an abrasive powder, revolving at the rate of 30 ± 1 rpm. At the end of 100 revolutions of the disc, the second parallel side of the tile is subjected to wear an equal number of revolutions of the disc. The wear of the tile is measured using AIM48101 thickness measuring device (which is supplied at extra cost). The Abrasion Testing Machine consists of a replaceable grinding path, fitted on to a disc rotating about its vertical axis. The rotating disc and the grinding path are enclosed by a circular tray. A bracket holds the specimen. The loading is by a counterbalanced lever. A funnel is provided to facilitate charging the grinding path with abrasive powder. Supplied complete with automatic pre-set revolution counter and one 7.5 kg weight, but without abrasive powder and thickness measuring device.

Our company is one of the renowned Manufacturers, Exporters and Suppliers of the Tile Abrasion Testing Machine. We manufacture Tile Abrasion Testing Machines from high-quality raw materials and the subsequent quality of the product is also superior. We provide deliveries on time so that the client needs are satisfied with great efficiency. Tile Abrasion Testing Machine is used to determine resistance to wear and tear of the cement and concrete flooring tiles. Parts of the Tile Abrasion Testing Machine Grinding PathRotating Grinding DiscThickness GaugeCircular Tray and BracketCounter Balance LeverFunnelRe-adjustable Pre-set Counter Features Manufactured as per Is 1237 and IS 1706Disc rotations of 30 rpm with a load of 30kgfDeals with tiles specimen of 7.06cm x 7.06cmPre-set counter stops the disc after 22 revolutions. The count can be re-adjusted.Works on 440 V AC three phase electric supply (Can be 230V machine on request)

• Type: Tile Abrasion Testing Machine
• Certification: ISO 9001:2008
• Weight: 100-1000kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Rated Power: 5-7kw

• Voltage: 415 V

The tile sample is pressed under a specified load against a grinding path, strewn evenly with abrasive powder, revolving at the rate of 30 ± 1 rpm. At the end of 100 revolutions of the disc, the second parallel side of the tile is subjected to wear for an equal number of revolutions of the disc. The wear of the tile is measured using EKE48101 thickness measuring device (which is supplied at extra cost). The abrasion testing machine consists of a replaceable grinding path, fitted on to a disc rotating about its vertical axis. The rotating disc and the grinding path are enclosed by a circular tray. A bracket holds the specimen. The loading is by a counter- balanced lever. A funnel is provided to facilitate charging the grinding path with abrasive powder.

We are offering tile abrasion testing machine. Tile abrasion testing machine: this is used for determination of resistance to wear for cement & concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tiles is subjected to wear for similar number of rotations. The wear of the tile is measurred on a thickness gauge specifically made for the purpose. The machine consists of a disc roatating at a speed of 30 r.p.m. In a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Land applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re- adjustable. The machine works on 440 va.c. Three phase electrical supply. On request machine to operate on 230 va.c. Supply can also be supplied.