Tile Making Machine Dealers in New Rohtak Road, Delhi

• Voltage: 220V
• Rated Power: 0.25 To 2 kw
• Brand Name: Steco
• Application: Industrial
• Frequency: 50/60 Hz
• Phase: Three Phase
• Use: Abrasion Tester
• Dial Gauge: 0.01 x 25 mm

• Type: Tile Abrasion Testing Machine
• Certification: ISO 9001:2008
• Weight: 100-1000kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Rated Power: 5-7kw

• ACCESSORIES: Thickness Measurement Jig with 0.01 mm x 25 mm dial gauge.

It is used for determining the resistance of flooring tiles to wear or abrasion. It consists of the following :- i) A grinding disc furnished with a replaceable grinding path and rotating horizontally about its vertical axis. ii) A circular tray enclosingthe grindingdisc. iii) Holding device for test specimen. iv) Reduction gear coupled to a motor for operation on 220 v, 50 Hz, single phase supply. v) Revolution counter. (Preset cumulative).

Capacity 200 kg. For cement concrete flooring tiles. The specifications are similar to the above machine, but for the bearing rollers of 25 mm dia and spans of 150, 200 and 250 mm. The load is applied at the rate of 200 kg/min/meter. Without lead shots.

Our company is one of the leading Manufacturers, Exporters and Suppliers of the Tile Flexure Testing Machine. The Tile Flexure Testing Machines produced by our company are high-quality with numerous features and types. They are widely in demand due to their excellent performance. Tile Flexure Testing Machine is a double lever loading machine where load is placed by a flow of lead metal that automatically stops as the sample breaks. The sample is mounted between rollers which are 40mm or 12mm in diameter. Bearing rollers can be placed at center distances of 150, 200 or 270mm. The unit comes equipped with a 20 Kg lead metal Types 100 KN Flexure Testing Machine - Motorized Model100 KN Flexure Testing Machine - Hand Operated Model Applications It is used for determining the flexure strength on molded concreteFlexure test specimens of 15 cm x 15 cm x 70 cm or 10 cm x 10 x 50 cm. size can be tested for strength by third point loading method

This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counter is Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On request machine to operate on 230 V A.C. Supply can also be supplied.

Tile Abrasion Testing Machine, subsonic wind tunnel, Colour Matching Cabinet